whats the going price on this burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hilljob26** · 01-25-2005, 09:31 PM

ok guys,boy do i have a find, i would love to post pics,but mt boy thought the camera looked better in the toilet,any way,its a 72 burd,396,tilt,tach,full air,FACTORY POWER WINDOWS,3/4 ton,posi,am/fm,buckets w/ console(nicetoo)this thing is bad a$$,only rust is on the top of the rear wheels.i bought this from a guy for 700,still have to pick it up,its at a friend of mines right now,just curious what i could pull out of this,i would like to finish my 72 4x4,so what do you guys think.let me know

Swbman · 01-25-2005, 11:38 PM

You didnt say whether or not if it was a runner,The only thing I would question as to originality is the power windows, I dont believe they were option that could be added to trucks blazers or burbs until 1973 even though they were availiable on gm cars much earlier. Now in answer to question.You made a Hell of Buy even if the thing is rustbucket,it has some of most sought after options,So I would say the 7 bills you plucked down for your burb made it a Hell of Score.

qksilver · 01-26-2005, 12:05 AM

you don't need any of those parts, none of them will fit. Instead sell it too me. I can be there Monday and get it out of your way! just joking, a great deal, one I have been looking for. Depending on the rust i would be interested in buying what left. Trying to replace my stolen 72 3/4 fully loaded burb

**hilljob26** · 01-26-2005, 12:25 AM

thanx guys,any ideas what i should ask for it, i really need to get my truck done,and the only reason i bought this thing is that i cant stand just letting one go w/ out a fight.if it were a 4x4 i would keep it,but it does run.

4x4Poet · 01-26-2005, 01:41 AM

You need to detail what works, what the appearance of the exterior/interior is, what' mods even if good, exact rust problems, etc. Really, there's no substitute for pics. I hear each one saves a thousand words.

qksilver · 01-26-2005, 10:49 PM

I will be back in town on Monday, let me know I found a shell and yours would be the perfect parts truck.
Thanks,
Steve

qksilver · 01-26-2005, 10:51 PM

or if it is repairable I would rather spend the money on the one you have...........let me know, money is tight but it is what i am looking for.

**hilljob26** · 01-27-2005, 11:28 PM

not to sure how much i will sell 4 yet,but will keep you in mind...mike

teeitup · 01-28-2005, 11:03 AM

pm'd you Mike!

TRUCKPOOR · 01-30-2005, 04:04 PM

PM sent. Thanks, Rob

01-25-2005, 09:31 PM	#1
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	whats the going price on this burb ok guys,boy do i have a find, i would love to post pics,but mt boy thought the camera looked better in the toilet,any way,its a 72 burd,396,tilt,tach,full air,FACTORY POWER WINDOWS,3/4 ton,posi,am/fm,buckets w/ console(nicetoo)this thing is bad a$$,only rust is on the top of the rear wheels.i bought this from a guy for 700,still have to pick it up,its at a friend of mines right now,just curious what i could pull out of this,i would like to finish my 72 4x4,so what do you guys think.let me know

01-25-2005, 11:38 PM	#2
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	You didnt say whether or not if it was a runner,The only thing I would question as to originality is the power windows, I dont believe they were option that could be added to trucks blazers or burbs until 1973 even though they were availiable on gm cars much earlier. Now in answer to question.You made a Hell of Buy even if the thing is rustbucket,it has some of most sought after options,So I would say the 7 bills you plucked down for your burb made it a Hell of Score. __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

01-26-2005, 01:41 AM	#5
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	You need to detail what works, what the appearance of the exterior/interior is, what' mods even if good, exact rust problems, etc. Really, there's no substitute for pics. I hear each one saves a thousand words. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

01-28-2005, 11:03 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	pm'd you Mike! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-26-2005, 12:05 AM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	you don't need any of those parts, none of them will fit. Instead sell it too me. I can be there Monday and get it out of your way! just joking, a great deal, one I have been looking for. Depending on the rust i would be interested in buying what left. Trying to replace my stolen 72 3/4 fully loaded burb

01-26-2005, 12:25 AM	#4
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	thanx guys,any ideas what i should ask for it, i really need to get my truck done,and the only reason i bought this thing is that i cant stand just letting one go w/ out a fight.if it were a 4x4 i would keep it,but it does run.

01-26-2005, 10:49 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	I will be back in town on Monday, let me know I found a shell and yours would be the perfect parts truck. Thanks, Steve

01-26-2005, 10:51 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	or if it is repairable I would rather spend the money on the one you have...........let me know, money is tight but it is what i am looking for.

01-27-2005, 11:28 PM	#8
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	not to sure how much i will sell 4 yet,but will keep you in mind...mike

01-30-2005, 04:04 PM	#10
TRUCKPOOR Registered User Join Date: Oct 2001 Location: Littleton, CO. USA Posts: 260	PM sent. Thanks, Rob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.