47-55.1 julianos seat belt install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nvrdone · 09-28-2019, 06:46 PM

has any one used the 3 point belt setup from Julianos for a bench seat?
Their instructions don't show where the end of the belt opposite the retractor mounts. Also, the mounting point on the retractor is plastic. seems like if we are involved in a crash, that point could break off and pull out.
Any thoughts? Thanks

51 Canadian GMC · 09-28-2019, 09:41 PM

I haven’t done it yet but check out Deve’s site. He has photo’s on his site of his install.http://devestechnet.com/Home/SeatBelts

nvrdone · 09-28-2019, 10:20 PM

thanks, but that doesn't help. his pictures are the same one on Julianos site & none of them show where to anchor the end of the belt.
also, doesn't address the plastic mounting of the reel.

MiraclePieCo · 09-29-2019, 04:06 AM

This might help:

http://67-72chevytrucks.com/vboard/s...d.php?t=197326

nvrdone · 09-29-2019, 12:04 PM

miricalepieco: thanks for the info. looks like the end of the belt bolts to the retractor mount thru the seat riser. I"ll try that. I guess the mount on the plastic case should be ok. if it wasn't there would be many law suits against Julianos.

nvrdone · 09-30-2019, 09:19 AM

just talked with Julianos. they clarified where the end of the belt mounts. that's good. they also said that the plastic is just a cover and there is a metal bracket inside. I'll have to look again but Im doubtfull

nvrdone · 09-30-2019, 08:51 PM

ok, I looked at the retractor again and they are right, im wrong. there is a plastic overlay on the metal mounting point. now on to figure out how I can mount the upper pivot point.

Matt_50 · 09-30-2019, 09:21 PM

I followed the link above, Deve details a lot of things really well.

nvrdone · 09-30-2019, 10:50 PM

ya I watched that vid & its good. just need to pull the headliner and figure out the top mount. im thinking using some fish line to get the mount in so I don't drop it.

Matt_50 · 09-30-2019, 11:06 PM

Yea I dropped my first one lol. You can hold it just barely if your careful. String is a good back up.

MiraclePieCo · 10-01-2019, 05:31 AM

Quote:

Originally Posted by Matt_50

Yea I dropped my first one lol. You can hold it just barely if your careful. String is a good back up.

Ha ha, I can relate! I was so scared of dropping my upper bolt between the cab double wall!

09-28-2019, 06:46 PM	#1
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	julianos seat belt install has any one used the 3 point belt setup from Julianos for a bench seat? Their instructions don't show where the end of the belt opposite the retractor mounts. Also, the mounting point on the retractor is plastic. seems like if we are involved in a crash, that point could break off and pull out. Any thoughts? Thanks

09-28-2019, 09:41 PM	#2
51 Canadian GMC Registered User Join Date: Feb 2012 Location: Petawawa On Posts: 7	Re: julianos seat belt install I haven’t done it yet but check out Deve’s site. He has photo’s on his site of his install.http://devestechnet.com/Home/SeatBelts

09-28-2019, 10:20 PM	#3
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: julianos seat belt install thanks, but that doesn't help. his pictures are the same one on Julianos site & none of them show where to anchor the end of the belt. also, doesn't address the plastic mounting of the reel.

09-29-2019, 04:06 AM	#4
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: julianos seat belt install This might help: http://67-72chevytrucks.com/vboard/s...d.php?t=197326 __________________ 1951 Chevy Panel Truck

09-29-2019, 12:04 PM	#5
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: julianos seat belt install miricalepieco: thanks for the info. looks like the end of the belt bolts to the retractor mount thru the seat riser. I"ll try that. I guess the mount on the plastic case should be ok. if it wasn't there would be many law suits against Julianos.

09-30-2019, 09:19 AM	#6
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: julianos seat belt install just talked with Julianos. they clarified where the end of the belt mounts. that's good. they also said that the plastic is just a cover and there is a metal bracket inside. I'll have to look again but Im doubtfull

09-30-2019, 08:51 PM	#7
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: julianos seat belt install ok, I looked at the retractor again and they are right, im wrong. there is a plastic overlay on the metal mounting point. now on to figure out how I can mount the upper pivot point.

09-30-2019, 09:21 PM	#8
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: julianos seat belt install I followed the link above, Deve details a lot of things really well. __________________ 1950 Build

09-30-2019, 10:50 PM	#9
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: julianos seat belt install ya I watched that vid & its good. just need to pull the headliner and figure out the top mount. im thinking using some fish line to get the mount in so I don't drop it.

09-30-2019, 11:06 PM	#10
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: julianos seat belt install Yea I dropped my first one lol. You can hold it just barely if your careful. String is a good back up. __________________ 1950 Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.