MD Parting 75 K10 LWB - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bhc41051** · 10-22-2016, 09:17 AM

[QUOTE=WORNBRAKES;7746886]bhc- Front bumper bolts will be listed with the bumper and brackets. I broke one of them and they are driver quality. Relay is $7 shipped to OH

I really need four OEM bolts. if you decide to separate I'll pay whatever you think is fair and send you replacement bolts.

WORNBRAKES · 10-22-2016, 11:36 AM

I really need four OEM bolts. if you decide to separate I'll pay whatever you think is fair and send you replacement bolts.[/QUOTE]

PM sent.

Oldriginal86 · 10-23-2016, 08:20 PM

Looking for front calipers, brackets and spindles if your parting out the front axle.

WORNBRAKES · 10-24-2016, 07:29 PM

Quote:

Originally Posted by Oldriginal86

Looking for front calipers, brackets and spindles if your parting out the front axle.

I am looking to sell the whole rolling chassis for $350 right now. I might decide to part it in a few weeks. If so I will keep you in mind.

Mario

**old Rusty C10** · 10-25-2016, 06:50 PM

Are the hood hinges any good?

WORNBRAKES · 10-25-2016, 09:06 PM

Brian, Your stuff shipped Monday.

Bob, Mandy removed and stored them. I will get a look at them tomorrow and get you some pictures. The hood was aligned well and I had no issues that would make me think they were bad.

**old Rusty C10** · 10-26-2016, 01:12 PM

Quote:

Originally Posted by WORNBRAKES

Brian, Your stuff shipped Monday.

Bob, Mandy removed and stored them. I will get a look at them tomorrow and get you some pictures. The hood was aligned well and I had no issues that would make me think they were bad.

ok cool in need them shipped ot 07731 Howell NJ residence... also if you grab em off the radiator support rubbers that stay between the radiator and the core support and shoroud

WORNBRAKES · 10-26-2016, 07:40 PM

Bob,

They are a bit dirty and require a good scrub but they are good-n-tight. The 6 bolts come with it. Shipping is $15.40 and I will do $29.60 for the pair. $45 total No support rubbers. The radiator was removed prior to it landing on my trailer.

**old Rusty C10** · 10-27-2016, 07:41 AM

How would you like payment?

WORNBRAKES · 10-27-2016, 04:59 PM

PM sent Bob.

**bhc41051** · 10-28-2016, 07:15 PM

Hi Mario, I received my bumper bolts, thank you very much. Here's the photo you requested, I think they cleaned up fairly well. Very presentable for my not perfect K-10. The second photo is your OEM bolt compared to the aftermarket bolt. Thanks again for all your help!

WORNBRAKES · 10-29-2016, 10:37 AM

Those cleaned up great Brian! Clearly a little elbow grease has paid dividends. You clearly had seen those bolts for what they could be. Glad I could help!

**old Rusty C10** · 10-29-2016, 10:08 PM

My son needs the transmission linkage his truck has a 700r4 not sure if they are the same but he needs the part that bolts to the frame and goes across with those springs and washers on it

WORNBRAKES · 10-30-2016, 08:24 PM

This truck had a 350/350/203 combo. I am not sure if they are the same or not. You may have to ask someone smarter than me.
I will send you all 3 of these pieces for $25 shipped to the same address if you want them. If they go to a different address I will have to check shipping but I don't imagine it would change much.
They would have fit in the hinge box that left Friday and probably not cost anything additional in shipping...... Oh well.

**old Rusty C10** · 10-31-2016, 05:34 PM

My son will be down tomorrow I will ask him what he needs..... also who do you know at the post office?? the box was here by 10AM I wish I could get JEGS to be as good!!

**old Rusty C10** · 10-31-2016, 09:40 PM

I am told we just need the two lower parts the long adjusting rod that comes off the column is fine so you can toss that out or whatever it should cut down on the shipping I will paypal you shortly

WORNBRAKES · 10-31-2016, 09:50 PM

No problem Bob, we got it. Did you want us to wait until you see your son to ship it?
As for the post office, i was more surprised it was only 15 to ship that last box. That was about $1 a pound and is not bad at their current rates.

**old Rusty C10** · 11-01-2016, 09:07 AM

no I already paypaled you so its cool to ship when you can

HunterRotten · 11-01-2016, 01:25 PM

How is the bed floor? I need some patches for mine.

WORNBRAKES · 11-01-2016, 08:22 PM

Quote:

Originally Posted by HunterRotten

How is the bed floor? I need some patches for mine.

This is the only picture I currently have. How big and where do you need and I can take a closer look?

////////////

Bob, it is boxed and will head your way in the am using the same USPS office.

HunterRotten · 11-01-2016, 09:40 PM

The main piece I'm in need of is behind the driver side wheel house, behind being towards the tail gate. I know this is a northern truck and a bit of a longshot but I thought I would ask.

WORNBRAKES · 11-02-2016, 06:55 PM

I think this is where you are talking about. To me, it is roached.

**old Rusty C10** · 11-06-2016, 05:41 PM

I need the radiator hold down . it bolts to the back of the rad support and is kinda like a 45 degree bracket

WORNBRAKES · 11-07-2016, 07:09 AM

Pretty sure i have it, I will check this afternoon.

Was everything good with the shift linkage?

WORNBRAKES · 11-07-2016, 11:09 PM

Mandy tells me you can have it for $30 shipped to the same address. That is with the 5 bolts to the core support. We dont have the other bolts as the radiator was pulled when i got the truck.

10-22-2016, 09:17 AM	#26
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Parting 75 K10 LWB [QUOTE=WORNBRAKES;7746886]bhc- Front bumper bolts will be listed with the bumper and brackets. I broke one of them and they are driver quality. Relay is $7 shipped to OH I really need four OEM bolts. if you decide to separate I'll pay whatever you think is fair and send you replacement bolts.

10-22-2016, 11:36 AM	#27
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB I really need four OEM bolts. if you decide to separate I'll pay whatever you think is fair and send you replacement bolts.[/QUOTE] PM sent. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

10-23-2016, 08:20 PM	#28
Oldriginal86 Registered User Join Date: Apr 2013 Location: Pasadena, Maryland Posts: 160	Re: Parting 75 K10 LWB Looking for front calipers, brackets and spindles if your parting out the front axle.

10-25-2016, 06:50 PM	#30
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB Are the hood hinges any good? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-25-2016, 09:06 PM	#31
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB Brian, Your stuff shipped Monday. Bob, Mandy removed and stored them. I will get a look at them tomorrow and get you some pictures. The hood was aligned well and I had no issues that would make me think they were bad. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

10-26-2016, 07:40 PM	#33
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB Bob, They are a bit dirty and require a good scrub but they are good-n-tight. The 6 bolts come with it. Shipping is $15.40 and I will do $29.60 for the pair. $45 total No support rubbers. The radiator was removed prior to it landing on my trailer. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

10-27-2016, 07:41 AM	#34
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB How would you like payment? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-27-2016, 04:59 PM	#35
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB PM sent Bob. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

10-28-2016, 07:15 PM	#36
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Parting 75 K10 LWB Hi Mario, I received my bumper bolts, thank you very much. Here's the photo you requested, I think they cleaned up fairly well. Very presentable for my not perfect K-10. The second photo is your OEM bolt compared to the aftermarket bolt. Thanks again for all your help! Attached Images

10-29-2016, 10:37 AM	#37
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB Those cleaned up great Brian! Clearly a little elbow grease has paid dividends. You clearly had seen those bolts for what they could be. Glad I could help! __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

10-29-2016, 10:08 PM	#38
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB My son needs the transmission linkage his truck has a 700r4 not sure if they are the same but he needs the part that bolts to the frame and goes across with those springs and washers on it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-30-2016, 08:24 PM	#39
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB This truck had a 350/350/203 combo. I am not sure if they are the same or not. You may have to ask someone smarter than me. I will send you all 3 of these pieces for $25 shipped to the same address if you want them. If they go to a different address I will have to check shipping but I don't imagine it would change much. They would have fit in the hinge box that left Friday and probably not cost anything additional in shipping...... Oh well. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

10-31-2016, 05:34 PM	#40
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB My son will be down tomorrow I will ask him what he needs..... also who do you know at the post office?? the box was here by 10AM I wish I could get JEGS to be as good!! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-31-2016, 09:40 PM	#41
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB I am told we just need the two lower parts the long adjusting rod that comes off the column is fine so you can toss that out or whatever it should cut down on the shipping I will paypal you shortly __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-31-2016, 09:50 PM	#42
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB No problem Bob, we got it. Did you want us to wait until you see your son to ship it? As for the post office, i was more surprised it was only 15 to ship that last box. That was about $1 a pound and is not bad at their current rates. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins



Register or Log In To remove these advertisements.

11-01-2016, 09:07 AM	#43
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB no I already paypaled you so its cool to ship when you can __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-01-2016, 01:25 PM	#44
HunterRotten Registered User Join Date: Oct 2016 Location: Kentucky Posts: 385	Re: Parting 75 K10 LWB How is the bed floor? I need some patches for mine. __________________ 1978 Hawaiian Blue GMC 454/Tremec TKO 500 BUILD THREAD

11-01-2016, 09:40 PM	#46
HunterRotten Registered User Join Date: Oct 2016 Location: Kentucky Posts: 385	Re: Parting 75 K10 LWB The main piece I'm in need of is behind the driver side wheel house, behind being towards the tail gate. I know this is a northern truck and a bit of a longshot but I thought I would ask. __________________ 1978 Hawaiian Blue GMC 454/Tremec TKO 500 BUILD THREAD

11-02-2016, 06:55 PM	#47
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB I think this is where you are talking about. To me, it is roached. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

11-06-2016, 05:41 PM	#48
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 75 K10 LWB I need the radiator hold down . it bolts to the back of the rad support and is kinda like a 45 degree bracket __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-07-2016, 07:09 AM	#49
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB Pretty sure i have it, I will check this afternoon. Was everything good with the shift linkage? __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

11-07-2016, 11:09 PM	#50
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: Parting 75 K10 LWB Mandy tells me you can have it for $30 shipped to the same address. That is with the 5 bolts to the core support. We dont have the other bolts as the radiator was pulled when i got the truck. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

Register or Log In To remove these advertisements.