Need Pic or Info on GMC 305V6 P/S Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Erl · 04-26-2002, 08:32 AM

I am changing my 68 3/4 4x4 from manual to power steering. Since I have the big V6, which is not so common, I am having trouble. Does someone have this setup in their truck or a 68 GMC manual with pictures?

71402BB · 04-26-2002, 08:37 AM

I saw a Big truck with the 305 in it not sure if it had power steering in it. Will power steering from a big truck work on a C-10?

------------------
71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's

72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!)

68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi

Erl · 04-26-2002, 10:07 AM

All I need are the pulleys. I got a pump with large reservor and bracket from GMCPaul used. I have a power steering box and hoses (standard stuff) located. I believe the pulleys off a larger truck would work. It is possible that a large truck would have an air compressor and require a double belt pully.

------------------
68 GMC 3/4 4x4 Stepside
54 Kaiser Darrin
Dallas TX

Longhorn Man · 04-26-2002, 08:09 PM

I'm headed to a v-6 one ton GMC in the junk yard tomorow...I'll take pics if I can.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Erl · 04-27-2002, 10:23 AM

I will be waiting for those pictures. Thanks

Slammed67 · 04-27-2002, 11:00 AM

You wouldn't be interested in a complete, very low miles, 305V6 would ya? Let me know if you are interested. It also has the power steering setup, so if you can't find a picture, let me know and I can probably get you one.

Thanks!

------------------
Current project: The "HACKstoration" 1967 GMC shortbed/fleetside, 350/700R4, air bag suspension, 18" billet wheels. Other vehicle of interest: 1957 Chevy Bel-Air 4dr hard top, 283/powerglide, lowered 3-1/2" in front and 2 inches in the rear.

Web Site: jaySpot.com AOL Screen Name: Slammed67GMC Location: Kansas City, MO

Erl · 04-27-2002, 11:16 AM

Well I am going to be in KC next week (may 4-7) for the Cast Expo. The engine I have runs well, but if the price was right. Let me know, maybe I could take a look at it.
Thanks

04-26-2002, 08:32 AM	#1
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Need Pic or Info on GMC 305V6 P/S Setup I am changing my 68 3/4 4x4 from manual to power steering. Since I have the big V6, which is not so common, I am having trouble. Does someone have this setup in their truck or a 68 GMC manual with pictures? __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-26-2002, 08:37 AM	#2
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	I saw a Big truck with the 305 in it not sure if it had power steering in it. Will power steering from a big truck work on a C-10? ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

04-26-2002, 10:07 AM	#3
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	All I need are the pulleys. I got a pump with large reservor and bracket from GMCPaul used. I have a power steering box and hoses (standard stuff) located. I believe the pulleys off a larger truck would work. It is possible that a large truck would have an air compressor and require a double belt pully. ------------------ 68 GMC 3/4 4x4 Stepside 54 Kaiser Darrin Dallas TX __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-27-2002, 10:23 AM	#5
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	I will be waiting for those pictures. Thanks __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-27-2002, 11:00 AM	#6
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	You wouldn't be interested in a complete, very low miles, 305V6 would ya? Let me know if you are interested. It also has the power steering setup, so if you can't find a picture, let me know and I can probably get you one. Thanks! ------------------ Current project: The "HACKstoration" 1967 GMC shortbed/fleetside, 350/700R4, air bag suspension, 18" billet wheels. Other vehicle of interest: 1957 Chevy Bel-Air 4dr hard top, 283/powerglide, lowered 3-1/2" in front and 2 inches in the rear. Web Site: jaySpot.com AOL Screen Name: Slammed67GMC Location: Kansas City, MO __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

04-26-2002, 08:09 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I'm headed to a v-6 one ton GMC in the junk yard tomorow...I'll take pics if I can. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-27-2002, 11:16 AM	#7
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Well I am going to be in KC next week (may 4-7) for the Cast Expo. The engine I have runs well, but if the price was right. Let me know, maybe I could take a look at it. Thanks __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.