RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators!

[SparkyRnD]

I wanted to take a moment and introduce our company, RnD Fabrication (www.rndfabrication.com). We just became a Gold Vendor as we manufacture Aluminum Crossflow Radiators for many vehicles, including the 67-72 Chevy trucks!

RnD Fabrication is proud to introduce our line of 1967-1972 Chevrolet & GMC C10 / C20 / Blazer Radiators! We can build these for stock engines, as well as for LS & other engine conversions with ports in the correct locations for your engine. All units include a transmission cooler at no additional charge (specify when ordering). If you want one for an LS conversion, there is no additional charge, and simply specify if you want the steam port or not. Retail price is $450, and members of this forum get a discounted price of $425.






Here is a link to the early C10 page on our website:
http://www.rndfabrication.com/C10middle.html

Make sure to mention you are a member to get your discount!


Also, we make them for 1963-1966 and 1973-1987 models as well!

[Number98]

Welcome to the board from another Georgia member!

[Captainfab]

Welcome to the forum

You make some very nice products. I really like that your radiators are made in the USA from USA materials.

[SparkyRnD]

thanks guys! We believe in quality products, and we firmly believe in USA made products. We are an American company, and we build our products with USA sourced materials, and he hand-make everything and TIG weld each item. No epoxy, no plastics, no junk, period.

We build our radiators for the C10, C20, C30, Blazers, etc. Let us know if we can help out on your project.

[67 Chevy PU]

request price:
radiator for 67 chevy 4 row, LS3 motor, 4L65E tranny, steam port? also need the dual
electric fan set up, shipped to 67101

[SparkyRnD]

the price is $425 and includes the LS ports, the transmission cooler and a steam port. The rad & fan kit is $220, and the controller with relay is $75. Note that the radiator and fan / shroud kit are your 67-72chevytrucks.com member discounted prices. Shipping is $58. We make them by hand, and the current turn around time is about 2-3 weeks. Let me know if you would like to order, or have questions.

[El Campo]

Can you give us a little more info about your radiators? Are they 1inch tubes or do you offer one?
Posted via Mobile Device

[SparkyRnD]

Sure, no problem. All of our radiators feature dual 1" thick cores, for a total core thickness of 2". The original radiators used 1/2" cores, so an old style 4-core is the same thickness as our dual core. Most of our cores are 16 fins per inch, and a few are 15. We find that those are the optimum numbers of fins for cooling. Too few and you don't get as cool. Too many and you bottleneck the air and it can't pass through as quickly and gets hot. We use billet necks that we weld both inside and out. We put in drain ports on every radiator, and we include transmission coolers at no additional charge (can be used for power steering, oil, etc.). We also build them for engine conversion (ie: changing the port locations) for no additional charge. We are an American company, hand making a product using USA-sourced materials (something we take great pride in).

While I realize that there are many choices out there, we hope that you will give us a look. We aren't a large company strictly looking to make profit at any cost, instead we are a company that believes in American-Made products, and we also are hard-core automotive people that like to support our hobby. If you have any questions, you can contact me on any of our threads, by PM, by email or by phone (number and email listed on our website at www.rndfabrication.com).

[El Campo]

I would be very interested in one of these. How many horsepower will they support? Have a Big block and AC both in South Texas.
Posted via Mobile Device

[SparkyRnD]

We have these cooling 500-550hp engines using our electric fans. We can support higher horsepower using our high-output fan kits ($100-150 over regular price depending on which fan is selected). A lot depends though on how your engine is built. If your big block is bored 60-over, then that is a different condition than a stock BBC would be. We like to know as many details as possible when you order so that we can tailor the order to your needs.

[chevyguy_72]

What are the other fan options do you have available?
Thanks

[SparkyRnD]

we have our own black-label fans that are good to around 500-550. After that, or for those that have bored engines, we have Derale and Perma-Cool fans

[68Stepbed]

Hey, Sparky. Welcome to the board as a vendor!!

BTW, this is Matt (Slick68) from p-t.com. That square catch can we had talked about before wouldn't fit the way I wanted.

[SparkyRnD]

Good to see you here as well Matt! If we can't get a square to fit, have space for a cylinder style? We can built a custom one if you have some shop drawings you'd like to send over and I can then quote it.

[SparkyRnD]

got a big engine? Maybe a custom engine swap? We're here to help!

[54Caddy]

nothing for 73-87s??

[SparkyRnD]

Yes, we cover the 73-87 models here:
http://www.rndfabrication.com/C10late.html




Forum member price is $445 for the radiator ($470 retail) and $225 for the fan & shroud kit ($245 retail)

[SparkyRnD]

back up top!

[SparkyRnD]

Bringing these back up, thanks for the orders and inquiries!

[SparkyRnD]

back up again

[SparkyRnD]

Just sold one for a K5 Blazer, thanks for the orders!

[SparkyRnD]

All pm's and emails responded to. Thanks!

[SparkyRnD]

feel free to contact us with questions, quote requests, etc

[SparkyRnD]

Shipping out another one today for a BBC conversion!

[lghtng2]

Well after going to advanced auto parts twice and O'Riley's once I give up. I need a 4 core radiator for my 72 Chevy truck manual transmission both necks need to come straight out due to the fact it is lifted. I also want the fan shroud and fans as well, how much is this gonna cost shipped to Speer, IL?