Custom Imprint HW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-26-2010, 08:39 PM

Does anyone know anything about custom imprinting on stuff like Hot Wheels?I wonder what it would take to do an order.I`ve always wanted to do it.I`d like the Custom 69.

**special-K** · 01-27-2010, 04:07 PM

Anyone else think this is a cool idea?I have a collection of custom imprint Hot Wheels.I have some from car shows.If they can do it we should be able to.

bigblock73 · 01-28-2010, 12:26 AM

There was a recent thread on the HAMB about this, wasn't cheap, but if you can sell them it would work out pretty good. Perhaps try a search over there, it was an interesting thread.

90\87Formula · 01-28-2010, 12:40 AM

Here's a link for ya'. It's at milezone.net, where I buy a lot of my diecast.
Not cheap, but it's the only place I could think of. https://milezone.3dcartstores.com/printing.html

**special-K** · 01-28-2010, 11:00 PM

I`ll look into that.I sent away for a Little Debbie 3 truck set once.I don`t know what happened,but I recieved 3 or so Hotwheels Stockers painted for Coronet paper towels.It came from a "fulfillment center" right here in MD.I don`t know if that`s just for distributing special offers or if they do the imprint.If I find them I`ll check them out and see.I have some from fairly small rod runs.I figure they must not cost too bad.It`s a $1 car,but the impint puts it in another range,for sure.I see low production ones go for $15 on the primary market and as much as $25 on the secondary.

Andy4639 · 02-01-2010, 12:34 PM

Contact Milzone they offer this. They did a year or so ago anyway they do them all the time for his store. I would love to have a 67-72 truck with the site LOGO on it.

http://www.milezone.net/bCUSTOM-IMPRINTING_c_47.html

**special-K** · 02-11-2010, 09:45 PM

I ve bought private labels and I`d pay $25.They can be had for cheaper with larger orders.But,it`s a lot of up front money,that`s true...like t-shirts or any promo.

01-26-2010, 08:39 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Custom Imprint HW Does anyone know anything about custom imprinting on stuff like Hot Wheels?I wonder what it would take to do an order.I`ve always wanted to do it.I`d like the Custom 69. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-27-2010, 04:07 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Custom Imprint HW Anyone else think this is a cool idea?I have a collection of custom imprint Hot Wheels.I have some from car shows.If they can do it we should be able to. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-28-2010, 12:26 AM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Custom Imprint HW There was a recent thread on the HAMB about this, wasn't cheap, but if you can sell them it would work out pretty good. Perhaps try a search over there, it was an interesting thread. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-28-2010, 12:40 AM	#4
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	Re: Custom Imprint HW Here's a link for ya'. It's at milezone.net, where I buy a lot of my diecast. Not cheap, but it's the only place I could think of. https://milezone.3dcartstores.com/printing.html __________________ Robert Member 1532
$90\87Formula is offline$

01-28-2010, 11:00 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Custom Imprint HW I`ll look into that.I sent away for a Little Debbie 3 truck set once.I don`t know what happened,but I recieved 3 or so Hotwheels Stockers painted for Coronet paper towels.It came from a "fulfillment center" right here in MD.I don`t know if that`s just for distributing special offers or if they do the imprint.If I find them I`ll check them out and see.I have some from fairly small rod runs.I figure they must not cost too bad.It`s a $1 car,but the impint puts it in another range,for sure.I see low production ones go for $15 on the primary market and as much as $25 on the secondary. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-28-2010 at 11:00 PM.

02-01-2010, 12:34 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Custom Imprint HW Contact Milzone they offer this. They did a year or so ago anyway they do them all the time for his store. I would love to have a 67-72 truck with the site LOGO on it. http://www.milezone.net/bCUSTOM-IMPRINTING_c_47.html __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 02-02-2010 at 02:06 AM.

02-11-2010, 09:45 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Custom Imprint HW I ve bought private labels and I`d pay $25.They can be had for cheaper with larger orders.But,it`s a lot of up front money,that`s true...like t-shirts or any promo. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.