The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-20-2019, 10:58 AM   #1
Senior Member
robnolimit's Avatar
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,224
OBS Performance Suspension Parts

Here at No Limit, we have been playing with a few OBS trucks for a year or so. We have some great working parts in the works, but we have a few questions for the OBS crowd. Thanks in advance for your help.

1. With out raising the bed floor, a 6" drop is about it. Is that enough for most of you?

2. We are working on a Torque Arm rear suspension with a Watts link. This requires a heavy steel fabbed diff cover. Are many of you using an aftermarket HD cover to secure the carrier bearings? (would not work with what we are planning)

3. Is swapping to a 9" rear too much $$, as this would be around a 3k upgrade (housing, axles, gears, brakes) to a rear suspension package.

4. Is the factory ABS a "Must Keep" for you?

5. How much total investment are you planning on for suspension upgrades to your truck, including drop kit, spindles, springs, sway bars, steering upgrades, rear suspension, coil-overs.........

Thanks again for any feedback.
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion

Proud to put our products up against all others!
robnolimit is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 06:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013