Door Hinge replacement 99 Silverado - The 1947 - Present Chevrolet & GMC Truck Message Board Network

renegade6 · 09-10-2009, 10:37 PM

Anyone have good instructions or tips on replacing door hinges on a 99 Silverado? It looks like someone did a poor job of replacing the pins and as a result, the entire hinges are going to need to be changed.

**Palf70Step** · 09-11-2009, 12:31 PM

I was under the impression they are not really replacable, at least to us normally folks. They are welded in place to the door.

**bwood** · 09-11-2009, 02:42 PM

These guys were advertising on another forums, looks cool.

http://www.totalauto.com/presentation/index.html

http://www.totalauto.com/

mbgmike · 09-11-2009, 05:57 PM

We sell all the same products from Total Auto.
We have installed many of their hinge replacement kits. It helps to have a door lift though or at least a makeshift if a DIY

mbgmike · 09-11-2009, 06:03 PM

Quote:

Originally Posted by Palf70Step

I was under the impression they are not really replacable, at least to us normally folks. They are welded in place to the door.

Impossible to reweld them back on. GM can't even do it. You have to bolt them back on. Send me email and I can send you the factory repair sheets

renegade6 · 09-11-2009, 08:22 PM

PM sent. Thanks

mbgmike · 09-11-2009, 09:15 PM

Quote:

Originally Posted by renegade6

PM sent. Thanks

It should be there Bud.

If you need the service kit we can send you one but any GM dealer should have it

mbgmike · 09-11-2009, 09:21 PM

Just for info GM charges like $900 to do this

We do it for quite a bit less

dixiegirl1629 · 08-30-2016, 05:15 PM

Can you send an email to me? My brother needs to replace his hinges on his silverado. My email is dixiegirl1629@aol.com. Thanks.

rudyyloverboiii · 01-11-2017, 12:44 AM

I too need help with these hinges. 2000 Silverado. Has lamb o doors n I wanna go back to stock. Help would b appreciated. Pm me

mbgmike · 09-11-2009, 05:58 PM

Quote:

Originally Posted by renegade6

Anyone have good instructions or tips on replacing door hinges on a 99 Silverado? It looks like someone did a poor job of replacing the pins and as a result, the entire hinges are going to need to be changed.

I can send you the Factory replacement instructions from Gm if you want. Give me you email and I can send the file. Easier than you may think

bighaas79 · 09-18-2009, 10:07 PM

have you tried drilling out the holes and use an oversized bushing?

mbgmike · 09-19-2009, 12:44 PM

Quote:

Originally Posted by bighaas79

have you tried drilling out the holes and use an oversized bushing?

Thats more work than the factory fix plus i doubt if that would withstand the time. The Factory fix is the way to go on this. Its really pretty simple. you drill out the holes. fish a knurled bolt up though the access hole in pillar. pull it through the oversize hole and bolt your hinge on. If their was an easier way we would do it.

renegade6 · 09-20-2009, 09:42 PM

Well, finished the top hinge. Not hard to install at all but, getting the old ones off is a PITA.

mbgmike · 09-21-2009, 06:49 AM

Quote:

Originally Posted by renegade6

Well, finished the top hinge. Not hard to install at all but, getting the old ones off is a PITA.

yeah. One of GM's better ideas. The a pillar actually flexes when you open the door if you watch. We have had to fix many of these good money maker for gm dealers

renegade6 · 09-27-2009, 07:01 PM

It's finally complete. I have to do a little adjustment (2X4 to the door) but, it is a lot better than it was. If anyone is trying this, I would strongly recommend an air chisel.

Thanks to everyone for the help.

09-10-2009, 10:37 PM	#1
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Door Hinge replacement 99 Silverado Anyone have good instructions or tips on replacing door hinges on a 99 Silverado? It looks like someone did a poor job of replacing the pins and as a result, the entire hinges are going to need to be changed. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476

09-11-2009, 12:31 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,644	Re: Door Hinge replacement 99 Silverado I was under the impression they are not really replacable, at least to us normally folks. They are welded in place to the door. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-11-2009, 02:42 PM	#3
bwood Registered User Join Date: Jan 2003 Location: Denison, Texas Posts: 1,919	Re: Door Hinge replacement 99 Silverado These guys were advertising on another forums, looks cool. http://www.totalauto.com/presentation/index.html http://www.totalauto.com/ __________________ 1998 GMC Sierra SLE 1/2 ton 2WD 305 Vortec -Gibson Stainless Cat Back Swept Side -SS Wheels 2005 Honda CRF250R 2006 Honda CRF150F Last edited by bwood; 09-11-2009 at 02:43 PM.

09-11-2009, 05:57 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Door Hinge replacement 99 Silverado We sell all the same products from Total Auto. We have installed many of their hinge replacement kits. It helps to have a door lift though or at least a makeshift if a DIY Last edited by mbgmike; 09-11-2009 at 06:05 PM.

09-11-2009, 08:22 PM	#6
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Door Hinge replacement 99 Silverado PM sent. Thanks __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476

09-11-2009, 09:21 PM	#8
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Door Hinge replacement 99 Silverado Just for info GM charges like $900 to do this We do it for quite a bit less

08-30-2016, 05:15 PM	#9
dixiegirl1629 Registered User Join Date: Aug 2016 Location: Mangham, La Posts: 1	Re: Door Hinge replacement 99 Silverado Can you send an email to me? My brother needs to replace his hinges on his silverado. My email is dixiegirl1629@aol.com. Thanks.

01-11-2017, 12:44 AM	#10
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: Door Hinge replacement 99 Silverado I too need help with these hinges. 2000 Silverado. Has lamb o doors n I wanna go back to stock. Help would b appreciated. Pm me

09-18-2009, 10:07 PM	#12
bighaas79 Registered User Join Date: Nov 2008 Location: manly iowa Posts: 390	Re: Door Hinge replacement 99 Silverado have you tried drilling out the holes and use an oversized bushing?

09-20-2009, 09:42 PM	#14
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Door Hinge replacement 99 Silverado Well, finished the top hinge. Not hard to install at all but, getting the old ones off is a PITA. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476

09-27-2009, 07:01 PM	#16
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Door Hinge replacement 99 Silverado It's finally complete. I have to do a little adjustment (2X4 to the door) but, it is a lot better than it was. If anyone is trying this, I would strongly recommend an air chisel. Thanks to everyone for the help. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.