The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board > 1969 - 1972 Blazers and Jimmys Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-30-2018, 12:32 AM   #51
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Something of a milestone today. It was a little over a year ago that I drove the Blazer into the garage. Today it moved out of the garage under its own power. It grew a couple of inches and turned blue. Working on aligning the doors before I put the front clip on.
Attached Images
  

Last edited by JackB; 03-12-2023 at 07:44 PM.
JackB is offline   Reply With Quote
Old 06-30-2018, 07:50 PM   #52
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Racking up the miles 1/10 already. Drove the Blazer on the trailer today and took it to the AC shop and got it charged up. Ended up going with R12 as it seems that was working best for most . Of course the AC effectiveness is somewhat limited by the lack of a windshield. One note on the AC, the reman A6 compressor came with the electrical connection at about the 2 O'clock position whereas the originals are more like 11 O'clock. I was able to make it work there but later discovered that it can be reclocked. At some point it will probably bug me enough that I'll get it fixed but it involves removing the compressor so it wont be anytime soon. Just a few more small items and the engine compartment will be finished and then I'm going to see about aligning the doors and getting the fenders and hood on. And remember how I said I didnt have any brake line leaks? Well I did, I just couldnt see it until it leaked enough to drip on the ground. Its a union on the inside of the frame rail thats leaking so add that to the list of things to sort out.
Attached Images
  
JackB is offline   Reply With Quote
Old 07-04-2018, 08:35 AM   #53
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,261
Re: 71 AZ Rust Free CST Blazer Frame Off

Quote:
Originally Posted by JackB View Post
Today it moved out of the garage under its own power. It grew a couple of inches and turned blue.
Lol! Congrats. Major milestone - looks like you'll be cruising here very soon.

You noticed the difference in clockface for the compressor harness connection also? My reman compressor that we repositioned the connection on blew a seal during charge and had to be removed and replaced. I have an original A6 compressor that I will send out for a rebuild.

Try shims to get the door aligned. Who knows maybe the new mounts differ enough from OEM that the alignment is slightly off.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 07-04-2018, 04:14 PM   #54
lks dcvn
Registered User
 
lks dcvn's Avatar
 
Join Date: Jan 2007
Location: Columbus, Ohio
Posts: 4,338
Re: 71 AZ Rust Free CST Blazer Frame Off

I have to say that this things looks incredible and just over a year to do this type of transformation is awesome!
lks dcvn is offline   Reply With Quote
Old 07-04-2018, 06:34 PM   #55
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Quote:
Originally Posted by DeadheadNM View Post
Lol! Congrats. Major milestone - looks like you'll be cruising here very soon.
Quote:
Originally Posted by lks dcvn View Post
I have to say that this things looks incredible and just over a year to do this type of transformation is awesome!
Thanks for the words of encouragement. I hope its together soon but as I'm sure you guys know the little details just take forever. Seems like everything has to go together at least twice before it stays for good. It cracks me up when I watch the car shows on TV where they always seem to have a deadline and they work all night to finish the build just in time for some event. Sorry I aint buying it. lol
JackB is offline   Reply With Quote
Old 07-06-2018, 04:12 PM   #56
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Another 2 steps forward and 1 back day. Got the front fenders on but decided to take off the top and have it repainted. The top is not original to this Blazer and had been repainted at some point.I thought it was good to go but after getting it mounted and looking at it for a few days I noticed enough little things that needed to be touched up that I decided just to bite the bullet and have the whole thing repainted.
Attached Images
 
JackB is offline   Reply With Quote
Old 07-08-2018, 10:58 PM   #57
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,261
Re: 71 AZ Rust Free CST Blazer Frame Off

You'll be glad you redid the top. Good decision.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 07-08-2018, 11:27 PM   #58
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Quote:
Originally Posted by DeadheadNM View Post
You'll be glad you redid the top. Good decision.
I'm sure I will. I picked up some of the Napa stoneguard as there is one area that would benefit from some texture touch up. From what I've read it appears the correct color is GM 521 White. Cant seem to get a handle on the correct sheen. Is it satin, semi gloss or somewhere in between?
JackB is offline   Reply With Quote
Old 07-11-2018, 06:47 PM   #59
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Some progress to report. Front fenders and grill are on and the interior is mostly installed.
Attached Images
  
JackB is offline   Reply With Quote
Old 07-11-2018, 09:40 PM   #60
IronCanine
I'm trying....
 
IronCanine's Avatar
 
Join Date: Oct 2013
Location: Athens, GA
Posts: 2,531
Re: 71 AZ Rust Free CST Blazer Frame Off

This is just a very solid build.
__________________
1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076
1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352
1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290
1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555

"Sometimes I wonder if zander208 was even real..."
IronCanine is offline   Reply With Quote
Old 07-20-2018, 07:26 PM   #61
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Really close now. I changed my mind several times about the wheels and tires I wanted. In the end I went with the ralley wheels with 33 x 10.5 tires. Im happy with it. Too bad the blue will have to come off the lettering, it kinda goes with the truck.
Attached Images
 
JackB is offline   Reply With Quote
Old 07-22-2018, 01:38 PM   #62
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Pretty much wrapped up under the hood. I confirmed what I already knew from my Camaro days that repop tower clamps suck. I'm getting better though I've learned that if you lube them up good and run them in once outside the car the failure rate is much lower. Only lost a couple this time around. Next up alignment and exhaust.
Attached Images
 
JackB is offline   Reply With Quote
Old 07-22-2018, 02:42 PM   #63
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,261
Re: 71 AZ Rust Free CST Blazer Frame Off

That all looks OUTSTANDING! The tower clamps can be a real pita. Don't forget the hose clamp on the hot water bypass valve...
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 08-03-2018, 09:49 AM   #64
1972CST
Registered User
 
1972CST's Avatar
 
Join Date: Mar 2008
Location: Concord NC
Posts: 511
Re: 71 AZ Rust Free CST Blazer Frame Off

Awesome build! Mine will resemble yours very closely.
I would like to get the details on your seat covers if I could- brand, where you got them, quality,...?
1972CST is offline   Reply With Quote
Old 08-03-2018, 04:49 PM   #65
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Quote:
Originally Posted by 1972CST View Post
Awesome build! Mine will resemble yours very closely.
I would like to get the details on your seat covers if I could- brand, where you got them, quality,...?
About the seats..Good news and bad. Quality is great, the vendor (Truck World) not so much. My purchase went OK with them (long wait time but that didnt matter to me as I was many months from needing them when I ordered). Read this http://67-72chevytrucks.com/vboard/s...d.php?t=740358
JackB is offline   Reply With Quote
Old 08-06-2018, 09:41 AM   #66
1972CST
Registered User
 
1972CST's Avatar
 
Join Date: Mar 2008
Location: Concord NC
Posts: 511
Re: 71 AZ Rust Free CST Blazer Frame Off

Thanks for the seat info, have some decisions to make now.
1972CST is offline   Reply With Quote
Old 08-06-2018, 11:35 AM   #67
jaros44sr
Registered User
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,408
Re: 71 AZ Rust Free CST Blazer Frame Off

Very nice build!!!
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 11-24-2018, 01:27 AM   #68
DBear
Registered User
 
DBear's Avatar
 
Join Date: Nov 2008
Location: Rowlett, TX
Posts: 860
Re: 71 AZ Rust Free CST Blazer Frame Off

very nice rig....curious to what lift and size you are running. thanks in advance
DBear is offline   Reply With Quote
Old 11-24-2018, 10:05 AM   #69
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Quote:
Originally Posted by DBear View Post
very nice rig....curious to what lift and size you are running. thanks in advance
The lift is 2 inch Tuff Country EZ ride (12612K). Tires are 33 x 10.5
JackB is offline   Reply With Quote
Old 11-24-2018, 03:15 PM   #70
DBear
Registered User
 
DBear's Avatar
 
Join Date: Nov 2008
Location: Rowlett, TX
Posts: 860
Re: 71 AZ Rust Free CST Blazer Frame Off

Quote:
Originally Posted by JackB View Post
The lift is 2 inch Tuff Country EZ ride (12612K). Tires are 33 x 10.5
Awesome, I thought it was a 4"....I like the ride height....thinking of going to 2" from my 4" lift. I hear skyjacker add-a-leafs will give these k5's about 2". Do you have a measurement from ground to top of fenderwell? Thanks again for the info
Attached Images
 
DBear is offline   Reply With Quote
Old 12-26-2018, 11:57 AM   #71
f.flujan
Registered User
 
Join Date: Dec 2016
Location: Menifee,ca
Posts: 65
Re: 71 AZ Rust Free CST Blazer Frame Off

hey nice truck neighbor. I'm in menifee as well working on a 68 c10. Who painted the blazer? gotta have a beer one day and talk trucks
f.flujan is offline   Reply With Quote
Old 02-28-2023, 08:31 PM   #72
JackB
Registered User
 
Join Date: May 2015
Location: Prescott AZ
Posts: 199
Re: 71 AZ Rust Free CST Blazer Frame Off

Hey guys its been a few years but Im back. Ive put a whopping 290 miles on the Blazer since I finished it. Ive decided its time to let it go and Im putting it in the Mecum auction Mar 31 in Glendale AZ. Heres the link if you know anyone who might be interested in bidding. https://www.mecum.com/lots/AZ0323-55...vrolet-blazer/
Attached Images
 

Last edited by JackB; 03-12-2023 at 07:46 PM.
JackB is offline   Reply With Quote
Old 12-16-2023, 05:51 AM   #73
yote1234
Senior Member
 
yote1234's Avatar
 
Join Date: Feb 2003
Location: arizona
Posts: 4,260
Re: 71 AZ Rust Free CST Blazer Frame Off

Beautifull blazer !!!
__________________
1971 K5 CST Blazer
1972 short super c10
1965 Chevelle Malibu 283
1968 Camaro 327
1968 Honda mini-trail z50a #377
1966 uh 1-D Huey

Last edited by yote1234; 12-16-2023 at 05:58 AM.
yote1234 is offline   Reply With Quote
Old 12-16-2023, 08:10 AM   #74
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,217
Thumbs up Re: 71 AZ Rust Free CST Blazer Frame Off

Someone will be a happy camper owning that one!
__________________
1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress...

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 38k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 54k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 12-23-2023, 11:34 PM   #75
LT7A
Registered User
 
Join Date: Oct 2015
Location: PNW
Posts: 3,472
Re: 71 AZ Rust Free CST Blazer Frame Off

I guess it's long gone by now. I hope it went well for you Jack. I'd have a hard time letting go of one like that. Too bad we never got to see it out and about, but 290 miles isn't much out-and-about-ness ; ) It was really cool to see the work you did on this one. Have you got another project you're working on now?
LT7A is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com