The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-12-2016, 11:05 PM   #51
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

Good analogy on what you heard. I think I'll prep myself for people asking and not give a yes or no, just say "$25,000". Either we'll have something to talk about or conversation over . It sure isn't worth that, but I'd sure sell it for that, buy myself a nicer one, and go buy a hamburger with the change
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 07-03-2016, 08:11 PM   #52
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

So I laid a couple of sets of cab lights up there today to see what looked good. I like both, the more chromed ones were the ones I really liked when I was younger. The more stock looking ones are more to the way I leaned later. Gonna be a tough decision for me. I have a couple of threads bookmarked on where to drill and how to best feed the wiring through. Going to have to ponder this one.

I put some new door panels on today, the ones Grumpy Old Man made for me. I forgot I don't have the black armrests anymore (tan on there now) and I need two more black estuchens, Ill get the stuff from Wes, put them on and then post some pics.
Attached Images
  
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-05-2016, 07:24 AM   #53
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

Hmmm...... Eenie meenie miney mo. It's your decision that's fo' sho'.

I guess the later ones would be correct for the future front end, but a guy could put whatever he wanted on a truck that didn't come with them, and they did, and they still can
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 08-29-2016 at 06:07 AM.
special-K is online now   Reply With Quote
Old 07-05-2016, 10:47 PM   #54
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

In the end its just going to be a mish mash of our trucks, but all one color. Not worried about it being totally stock.

I think Ill probably go with the more correct ones, They have LED lighting though. If they are a lot brighter than the rest of the lights Ill have to do some more figuring =)
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-05-2016, 11:32 PM   #55
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,108
Re: 68 K20 GMC/Chevy

I have some cab lights for my 72 but what I'm wondering is, do you run the wire down the B pillar, or is there an access hole to run the wires down the A pillar? From the research I've done, there doesn't seem to be any access point at the top of the A pillar inside the roof area.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 07-06-2016, 03:40 AM   #56
Billhilly
Registered User
 
Billhilly's Avatar
 
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
Re: 68 K20 GMC/Chevy

There is a hole at the top of the left A pillar. I think there is a page in the assembly manual showing the factory setup. Where the dash attaches to the bottom of the pillar there is a round hole punched into one of the brace pieces. I'm guessing if the truck was speced with cab lights the hole in the actual A pillar was punched to give access?
__________________
1972 K2500 Long Box
400/350
Billhilly is offline   Reply With Quote
Old 07-06-2016, 07:08 AM   #57
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

All trucks have a way to pass the wire through the driver side windshield post. I did it years ago. I guess it was tedious, but I don't recall it being anything that difficult. TX Fireman did a video on a method he came up with. I believe it's in the FAQ forum.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 07-06-2016, 10:40 PM   #58
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

Here is a vid Txfirefighter did

http://67-72chevytrucks.com/vboard/s...d.php?t=448124
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-07-2016, 12:39 PM   #59
GSP7
Registered User
 
GSP7's Avatar
 
Join Date: Sep 2012
Location: Idaho
Posts: 621
Re: 68 K20 GMC/Chevy

Air is the same way electricians run wire down conduit. They actually have a little parachute birds they start into the conduit for long distance



You going to put different rear-view mirrors on that truck ?


.
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4,

Pinstriping-Lettering-Specialty Painting

Last edited by GSP7; 07-07-2016 at 12:54 PM.
GSP7 is offline   Reply With Quote
Old 07-07-2016, 04:52 PM   #60
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,108
Re: 68 K20 GMC/Chevy

Quote:
Originally Posted by CG View Post
Thanks for that link! I'll have to check an extra cab I have for the access hole under the dash. In the video, that is a 73 up cab, not a 67-72. If I get around to putting mine on soon, I'll take pics. But I bet you get yours on before I do.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 07-08-2016, 10:22 PM   #61
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

Quote:
Originally Posted by GSP7 View Post
Air is the same way electricians run wire down conduit. They actually have a little parachute birds they start into the conduit for long distance



You going to put different rear-view mirrors on that truck ?


.
Keeping the mirrors. Going to have them blasted and Ill paint them argent silver. I have new mirror heads that have the yellow chevrons on them.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-09-2016, 09:42 AM   #62
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

Bus-type GM mirrors. Not so common to see
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 07-09-2016, 11:57 PM   #63
tommys72
Registered User
 
tommys72's Avatar
 
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
Re: 68 K20 GMC/Chevy

I'm digging the truck
__________________
United States Marine Corps 2000-2011
Iraq and Afghanistan veteran
Just living life now and enjoying it and my wife, daughter and son


tommys72 is offline   Reply With Quote
Old 07-10-2016, 10:59 AM   #64
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

Quote:
Originally Posted by special-K View Post
Bus-type GM mirrors. Not so common to see
Yeah I don't see em much, but I had the same style on my last K20 so I think they were meant to be

I want to take the rear bumper, the seats minus the upholstery and the mirrors in to the sand blasters. I think that rear bumper is going to be tricky to get off.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-11-2016, 07:26 AM   #65
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

might get lucky, but I'd start a regiment of soaking with your favorite "help it bust loose" product. Then there's always that thin little 4" round thing that loves to eat bolt heads.

I have a decent '72 step bumper I was thinking I'd like to get sand blasted soon. It has a slightest twist on one corner I think I can get straight, and need to do first. I got it at a junk yard a couple years ago. With minimal tools I didn't have anything for pulling it. I found a jack ratchet in a car that slips over the piece that goes into the jack, maybe lug wrench part? Anyway, it was the right size, 3/4" I think, and after borrowing a rubber floor mat from another vehicle, and not sure what held the other side (maybe a lug wrench) I managed to get that bugger off after a lot of effort, but the bolts weren't stuck. I think I did take some oil off a dip stick to help them along. After all that effort, especially carrying that thing out, I hope I can get that tweak out and have a decent bumper for very cheap. My plan is to have it chromed if I can get it perfect. If not, I'll sand blast and powder coat in argent, as factory
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 07-11-2016, 08:19 PM   #66
GSP7
Registered User
 
GSP7's Avatar
 
Join Date: Sep 2012
Location: Idaho
Posts: 621
Re: 68 K20 GMC/Chevy

What is a Bus-type GM mirror look like?

These mirrors are aftermarket from back in the day arent they? Im sure they are, I had similar ones on my '65

.
.
.

I had these factory stainless steel mirrors on a 69 ford f250 I had. Liked them
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4,

Pinstriping-Lettering-Specialty Painting
GSP7 is offline   Reply With Quote
Old 07-11-2016, 11:24 PM   #67
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

Im pretty sure mine are aftermarket. Yours look good too.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-12-2016, 09:04 AM   #68
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

These mirrors are GM RPO D38 Bus Type Extension Mirror
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 07-12-2016, 10:16 AM   #69
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

Im starting to get used to the lift, although its a bit of a hassle to hop in and out, I may just keep it. Im glad I didnt go out and buy new springs (although I have em picked out with my finger on the trigger lol) My wife and granddaughter have both ridden in the truck now and its kind of amusing watching them try to get in =)

If I do end up keeping it Ill look for a step up bar or some sort of handle. A step up bar I can sort of hide with paint, but a handle is pretty ugly unless I can figure out a way to mount it inside the cab.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-19-2016, 11:22 PM   #70
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

I was out this weekend riding around with my honey and some fella came up and said, I really love your truck!

My wife was like ... What?

Haha!
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-31-2016, 07:15 PM   #71
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

Nothing new here, just trying to see if I can post a larger picture.

__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 08-05-2016, 01:21 AM   #72
Spartan
Registered User
 
Spartan's Avatar
 
Join Date: Dec 2012
Location: Backwoods, OR
Posts: 888
Re: 68 K20 GMC/Chevy

nice wheels...things moving along nicely.
question for you...Will a 71/72 grill fit the 68/gmc fenders? or is it that they will fit but the difference will omly be noticed by the "trained eyes?"

personally, I like the red on GMCs for some reson.

I have guys tryng to buy my hobbies every so often. its a compliment and sometimes they try to employ the "point out the issues" tactic. I just smile and nod. thing is if the truck is mine i know where the diamonds are as well as the poop. lol

cheers!
__________________
'69 K20 350/4 speed/Rockwell/D44/HO52.

"orange rhymes with door hinge"
Spartan is offline   Reply With Quote
Old 08-05-2016, 10:21 PM   #73
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

I'm not super versed on GMC grills and fenders if that's what you mean by 71/72.

If you are talking about Chevy, no they wont work. You need core support, fenders, latching mech, and hood from a 71/72
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 08-10-2016, 07:24 AM   #74
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,710
Re: 68 K20 GMC/Chevy

When people try the "point out flaws" tactic on me I end the conversation with "I guess you don't like it" and turn away. If I wanted to sell I'd say, "Won't affect the price". If at first look they see it, don't they think I have?

I had a paving contractor ask if for sale while at work on a house. I said, "This one is my keeper". He has no idea all the K/20s I've had or where I'm at in life. He said, "If I had that truck I'd restore it and it would never see a day of work". I said, "Been there done that. I'm enjoying this one".

Best original with this shorty and have done over 10 or 12 (not including a few 1/2Ts) in the last 40 years
Name:  002_2.jpg
Views: 290
Size:  52.9 KB

Now I work this GMC's butt off and it thanks me
Name:  IMG_1051.jpg
Views: 297
Size:  59.8 KB

I intentionally loaded it tail-end heavy for the hundred or so mile trip (incl. over two mountains) to help mate better with trailer. The hitch is in the Bartens bumper above the receiver, and I can't get a wrench on the nut.

I mostly enjoy taking nice and mellow country back road drives in it going where I have to go, doing what I need to do. Just like back in '72! (when I was a kid driving a bug)
Attached Images
 
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 08-29-2016 at 06:31 AM.
special-K is online now   Reply With Quote
Old 08-27-2016, 08:23 PM   #75
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 68 K20 GMC/Chevy

So after doing a whole lot of nothing really with the truck (messing around with the interior some) Ive decided that bent bumper is really bugging me.

Ive also decided what it is I just don't care for on the GMC grill ... Way too much chrome on there. I do have everything I need to change it to 71/72 Chev. But after looking at a ton of GMC pics I actually like the ones without the extra chrome on the hood and fenders. So do I take that chrome off of mine, fill the holes, and get a new bumper ... Or go through the hassle of swapping out the entire front end?

Wonder what special-K will advise?

Oh also, 505 green was my choice of color, but this vermillion (or whatever it is) is really growing on me. You don't see a lot of trucks this color.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291

Last edited by CG; 08-27-2016 at 08:28 PM.
CG is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com