47-55.1 Frame dimension measurements - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JdavUGA · 09-02-2020, 09:25 AM

1950 Chevy 3100

I am not in the same location as my truck right now, but trying to plan for a cab buck/dolly. I'd like to cut all my wood at my house and then transport and assemble on site.
Can anyone tell me the following:

width (outside to outside) of the stock frame at the front cab mounting points
width (outside to outside) of the stock frame at the rear cab mounting points
length between the front and rear cab mounting points

Alternatively, if there are cab dolly plans specific to an AD, I'd love to see them (everything I could find was earlier, later or didn't have measurements).

Thanks in advance

**mongocanfly** · 09-02-2020, 12:16 PM

Maybe this'll help

JdavUGA · 09-02-2020, 12:35 PM

Thank you - any chance you have a higher resolution version? I can't read the numbers!

**mongocanfly** · 09-02-2020, 01:58 PM

It's very hard to make out the numbers from the book..
It doesnt show the actual frame measurements...so this may not help..
But ..these are cab mount hole locations
front mounting hole width is 47 +.031 -.094
Front to back, hole spacing is 36 + - .094
Oddly there is no measurement for rear width
But on the 3600 series it shows 44...but the frame shape is diff on a 3600

JdavUGA · 09-02-2020, 02:13 PM

Perfect - thank you!

mr48chev · 09-02-2020, 03:49 PM

I've got copies of the same diagram here but don't know if the numbers are any more readable. As Mongocanfly said, they are hard to read when you have the assembly manual in front of you because those images are photo copies.

https://s173.photobucket.com/user/mr...?sort=4&page=1

nvrdone · 09-03-2020, 11:28 PM

maybe i can help. on my '49 3100 at the front mounts, the frame is 33.5" outside to outside. to that add 11" each side for the "outriggers" for a total of 55.5"
on the back mounts the frame is 38" out side to out side. this does not include any dimensions for the mounts. Front to back, center to center is 33.5"
hope this helps.

09-02-2020, 09:25 AM	#1
JdavUGA Registered User Join Date: Aug 2020 Location: Atlanta, GA Posts: 28	Frame dimension measurements 1950 Chevy 3100 I am not in the same location as my truck right now, but trying to plan for a cab buck/dolly. I'd like to cut all my wood at my house and then transport and assemble on site. Can anyone tell me the following: width (outside to outside) of the stock frame at the front cab mounting points width (outside to outside) of the stock frame at the rear cab mounting points length between the front and rear cab mounting points Alternatively, if there are cab dolly plans specific to an AD, I'd love to see them (everything I could find was earlier, later or didn't have measurements). Thanks in advance

09-02-2020, 12:16 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,592	Re: Frame dimension measurements Maybe this'll help Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 09-02-2020 at 12:22 PM.

09-02-2020, 12:35 PM	#3
JdavUGA Registered User Join Date: Aug 2020 Location: Atlanta, GA Posts: 28	Re: Frame dimension measurements Thank you - any chance you have a higher resolution version? I can't read the numbers!

09-02-2020, 01:58 PM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,592	Re: Frame dimension measurements It's very hard to make out the numbers from the book.. It doesnt show the actual frame measurements...so this may not help.. But ..these are cab mount hole locations front mounting hole width is 47 +.031 -.094 Front to back, hole spacing is 36 + - .094 Oddly there is no measurement for rear width But on the 3600 series it shows 44...but the frame shape is diff on a 3600 __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 09-02-2020 at 02:04 PM.

09-02-2020, 02:13 PM	#5
JdavUGA Registered User Join Date: Aug 2020 Location: Atlanta, GA Posts: 28	Re: Frame dimension measurements Perfect - thank you!

09-02-2020, 03:49 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,314	Re: Frame dimension measurements I've got copies of the same diagram here but don't know if the numbers are any more readable. As Mongocanfly said, they are hard to read when you have the assembly manual in front of you because those images are photo copies. https://s173.photobucket.com/user/mr...?sort=4&page=1 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-03-2020, 11:28 PM	#7
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: Frame dimension measurements maybe i can help. on my '49 3100 at the front mounts, the frame is 33.5" outside to outside. to that add 11" each side for the "outriggers" for a total of 55.5" on the back mounts the frame is 38" out side to out side. this does not include any dimensions for the mounts. Front to back, center to center is 33.5" hope this helps. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.