'62 GMC BurbMaster "Rust"oration, Patina Build..... - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BRASSHEAD · 08-31-2012, 10:08 AM

I would like to see more on the front crossmember. Everything looks great.

**ChiefRocka** · 08-31-2012, 11:40 PM

It's almost done ... working on a buddy's boat this weekend.

Will have a full spread on it soon...

Andyboy · 09-09-2012, 09:43 PM

Looking good. Can't wait to see the how-to on cross member, doing my soon.

notsolo · 12-11-2012, 06:28 PM

Quote:

Originally Posted by ChiefRocka

After installing, I noticed the underside FRONT TWO bolt holes line up perfectly, and well as the upper a-arm studs are close, as well as indintations for a-arm clearance.

After checking Mark's how, and chatting with him....he seems to recall the REAR hole lineing up.....Hmmm ?? He also mentioned he did his 15 yrs ago, and doesn't recall exactly ...

I never did mark the spindle location to ground, so I'm gonna slide the torsion frontend back on to get a measurement, no biggie...

UNLESS SOMEONE HERE CAN CONFIRM THE FRONT TWO ARE CORRECT ??

-

-
-
Reguardless, I'm gonna take a lot of pics to add to Mark's How-to

Center Front A arm stud to center radiator support hole is 22 1/4 on mine. Donor was an 82..

**ChiefRocka** · 12-13-2012, 10:33 AM

Quote:

Originally Posted by BRASSHEAD

I would like to see more on the front crossmember. Everything looks great.

Quote:

Originally Posted by Andyboy

Looking good. Can't wait to see the how-to on cross member, doing my soon.

The HOW TO can be found here:

http://67-72chevytrucks.com/vboard/s...d.php?t=543729

**ChiefRocka** · 12-13-2012, 10:41 AM

Not much progress, but some is better than none .....

Front A-arms diassembled and off to coating. Wasn't planning on coating the A-arms, but since the guy is just right across the parking lot, and I threw them with a bunch of other parts from a customer build.

-
-

**ChiefRocka** · 12-13-2012, 10:52 AM

Crossmember done, awaiting blasting ...
-
-

gostranger · 12-13-2012, 06:08 PM

Cool! Be glad you have progress!! I am hoping to do more on mine the suburban population has grown!
Posted via Mobile Device

**ChiefRocka** · 12-14-2012, 06:32 AM

Quote:

Originally Posted by gostranger

Cool! Be glad you have progress!! I am hoping to do more on mine the suburban population has grown!
Posted via Mobile Device

It has !

I got these last night from my machinist ...

He enlargened the openings to except the previously made bungs to convert to 88-98 LBJ's....

-

Weld the rings in and weld/smooth out spotweld drill marks (from removing the super tall, drop restricting, bump stop mounts)....then off to coating !

robber grin · 12-14-2012, 08:15 AM

Quote:

Originally Posted by notsolo

Center Front A arm stud to center radiator support hole is 22 1/4 on mine. Donor was an 82..

22 3/8" on my 62 C10's conversion done with a 78 1/2t 2wd burb clip

Dinos63 · 12-14-2012, 05:57 PM

cool stuff !

**ChiefRocka** · 12-16-2012, 11:14 AM

Quote:

Originally Posted by Dinos63

cool stuff !

Did you ever get my addy ??

Welded these up last night at ACC ....
-
-
-

Dinos63 · 12-16-2012, 11:39 AM

Quote:

Originally Posted by ChiefRocka

Did you ever get my addy ??

Welded these up last night at ACC ....
-
-
-

no? nice work kat nice work

**ChiefRocka** · 12-16-2012, 11:55 AM

Quote:

Originally Posted by Dinos63

no? nice work kat nice work

You PM'd me wanting my addy ... I'll send it again !!

**ChiefRocka** · 12-16-2012, 08:01 PM

Looks like RockTonka has my seats, wrapped and ready to ship !!!

Thanks PHIL !!!

Time to get some bids on shipping ....
-
-
-

-
-

**Captainfab** · 12-17-2012, 12:58 AM

Cool

Did you happen to measure the ID after you welded them to see if they shrunk any? That is something I have been wondering about when I do mine.

Quote:

Originally Posted by ChiefRocka

Did you ever get my addy ??

Welded these up last night at ACC ....
-
-
-

**ChiefRocka** · 12-17-2012, 09:54 AM

I did not, but I did temporarily press in a BJ, and it went in perfect...with a nice "press fit".
-
-
Few pics from Rich ....
-
-

-
-

54Caddy · 01-02-2013, 03:39 AM

what is the point of the 88-98 lower balljoint?

**Captainfab** · 01-03-2013, 02:34 AM

You have to use the '88-'98 lower ball joint if you are going to run the '88-'98 spindles and the factory style 6 lug rotors. Most guys that use these conversion parts, use a '67-'72 C20 lower control arm. But Chief wanted to use the '73-'87 control arms with the rubber bushings, so this is how to make that happen. I will be doing the same thing on my '66 Burb. The Chief just beat me to it.

Quote:

Originally Posted by 54Caddy

what is the point of the 88-98 lower balljoint?

RockTonka · 01-03-2013, 02:56 AM

Quote:

Originally Posted by ChiefRocka

Looks like RockTonka has my seats, wrapped and ready to ship !!!

Thanks PHIL !!!

Time to get some bids on shipping ....

I'm stoked they're going to a good home...any more progress on the burb??

Don't let the new shop take over ALL your time...

**ChiefRocka** · 01-18-2013, 09:36 AM

Quote:

Originally Posted by RockTonka

I'm stoked they're going to a good home...any more progress on the burb??

Don't let the new shop take over ALL your time...

Unfortunately, it has !

The only new thing lately is the A-arms have been coated a satin chassis black.

Driveway Dreams · 02-11-2013, 01:34 AM

Dude! I haven't been on the forum for quite a while. This is the first time I saw your build. Excited to see what you're doing with this thing. It might even be a little motivation for me. Hopefully we can get these burbs back together and on the road soon.
Posted via Mobile Device

MikeS. · 02-11-2013, 05:54 PM

"Hopefully we can get these burbs back together and on the road soon."

Man I so agree, mine is getting closer every day.

Chief, keep plugging away.
Posted via Mobile Device

**ChiefRocka** · 02-28-2013, 08:21 PM

Quote:

Originally Posted by Driveway Dreams

Dude! I haven't been on the forum for quite a while. This is the first time I saw your build. Excited to see what you're doing with this thing. It might even be a little motivation for me. Hopefully we can get these burbs back together and on the road soon.
Posted via Mobile Device

Quote:

Originally Posted by MikeS.

"Hopefully we can get these burbs back together and on the road soon."

Man I so agree, mine is getting closer every day.

Chief, keep plugging away.
Posted via Mobile Device

Well ... I figure I work on my own stuff a day or so every couple months...

I dont have too much to report, other than I sandblasted and painted my spindles, oooooweeeee ! :
-
-

-
-
And most Importantly, I finally had the extra $$ to have the pallet of Suburban seats shipped to me from OKC !!!

I used "Uship" to get some quotes, and it was actually pretty reasonable !!

Should see them within 5 business days, cant wait to get them.

Rocktonka took the time to make sure they were well wrapped...

**ChiefRocka** · 03-09-2013, 09:28 AM

-
-
Well last week I contacted "U-ship" to get some bids going on shipment of the Burb seats I purchased from Rocktonka....

After about 2 weeks total (bids accepted/shipping), they made it safe and sound !!
-
-

-
Rock swears the drivers seat was perfect when it left him ....

-

-
-
I went from NO seats, to all three rows !
-
-
Turns out, this material is still made....Might have to look into that soon.
-
-
One step closer...
-
-
BIG THANKS AGAIN TO ROCKTONKA FOR ALL HIS HELP AND PATIENCE !!!!

08-31-2012, 10:08 AM	#126
BRASSHEAD Registered User Join Date: Feb 2006 Location: Indiana Posts: 188	Re: '62 GMC Suburban "Rust"oration, Patina Build..... I would like to see more on the front crossmember. Everything looks great.

08-31-2012, 11:40 PM	#127
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... It's almost done ... working on a buddy's boat this weekend. Will have a full spread on it soon... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-09-2012, 09:43 PM	#128
Andyboy Registered User Join Date: May 2010 Location: Visalia, CA Posts: 376	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Looking good. Can't wait to see the how-to on cross member, doing my soon.

12-13-2012, 10:41 AM	#131
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Not much progress, but some is better than none ..... Front A-arms diassembled and off to coating. Wasn't planning on coating the A-arms, but since the guy is just right across the parking lot, and I threw them with a bunch of other parts from a customer build. - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

12-13-2012, 10:52 AM	#132
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Crossmember done, awaiting blasting ... - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

12-13-2012, 06:08 PM	#133
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Cool! Be glad you have progress!! I am hoping to do more on mine the suburban population has grown! Posted via Mobile Device

12-14-2012, 05:57 PM	#136
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: '62 GMC Suburban "Rust"oration, Patina Build..... cool stuff ! __________________ CHEVY ONLY... Nothin Else !

12-16-2012, 08:01 PM	#140
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Looks like RockTonka has my seats, wrapped and ready to ship !!! Thanks PHIL !!! Time to get some bids on shipping .... - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

12-17-2012, 09:54 AM	#142
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... I did not, but I did temporarily press in a BJ, and it went in perfect...with a nice "press fit". - - Few pics from Rich .... - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-02-2013, 03:39 AM	#143
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: '62 GMC Suburban "Rust"oration, Patina Build..... what is the point of the 88-98 lower balljoint? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

02-11-2013, 01:34 AM	#147
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Dude! I haven't been on the forum for quite a while. This is the first time I saw your build. Excited to see what you're doing with this thing. It might even be a little motivation for me. Hopefully we can get these burbs back together and on the road soon. Posted via Mobile Device __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

02-11-2013, 05:54 PM	#148
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: '62 GMC Suburban "Rust"oration, Patina Build..... "Hopefully we can get these burbs back together and on the road soon." Man I so agree, mine is getting closer every day. Chief, keep plugging away. Posted via Mobile Device __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

03-09-2013, 09:28 AM	#150
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: '62 GMC Suburban "Rust"oration, Patina Build..... - - Well last week I contacted "U-ship" to get some bids going on shipment of the Burb seats I purchased from Rocktonka.... After about 2 weeks total (bids accepted/shipping), they made it safe and sound !! - - - Rock swears the drivers seat was perfect when it left him .... - - - - - - - I went from NO seats, to all three rows ! - - Turns out, this material is still made....Might have to look into that soon. - - One step closer... - - BIG THANKS AGAIN TO ROCKTONKA FOR ALL HIS HELP AND PATIENCE !!!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.