MN Oem custom cuttings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HWY-STAR** · 07-18-2023, 02:47 PM

I have alot of oem sheet metal that I can't get myself to scrap.

This add is for cuttings from the following.

3 cabs
6 bedsides
Frames
Bed header panels
Fenders
Bumpers
Doors
Steal bed floor
Hoods
Radiator support--no PS lower flanges
Grills
Tail gate
Uncut dash
Good firewall
Cab roof
Suburban frame

Prices are 20.00 to 150.00 plus shipping or you can pick up.
Pm me what you need and we'll go from there.
Thanks, Dan

**70STOVEBOLT** · 07-18-2023, 03:53 PM

Dan, I might be interested in a driver's door patch, possibly two. I will take a look at my door tonight and send a PM with what I need. Thanks, Mark

**HWY-STAR** · 07-18-2023, 04:14 PM

OK, thank you Mark.

AJs72K5 · 07-18-2023, 04:56 PM

Dan - I need a driver's side front fender cup.

**HWY-STAR** · 07-18-2023, 05:01 PM

Thanks AJ, I will let you know what I have this evening.

**JEM Motorworks** · 07-18-2023, 10:18 PM

I also need a left/ drivers side fender cup.

**HWY-STAR** · 07-18-2023, 11:30 PM

PM sent. Thank you

Hotrod1952 · 07-19-2023, 03:02 PM

Any right rear bed side repair pieces? Looking for behind rear wheel up about 20" or so.
Also PM your location if you have.

**HWY-STAR** · 07-19-2023, 03:18 PM

Hi there. I am 40 miles east of Rochester, MN. I have 3 RH bed sides. I will check them out this evening and let you know what I have.
Thank you, Dan

**Eagle9502** · 07-19-2023, 03:58 PM

Have any 4x4 frames?

**HWY-STAR** · 07-19-2023, 04:03 PM

No sir, I wish I did though. Thanks for asking.

**70STOVEBOLT** · 07-20-2023, 11:02 AM

Dan here is what I am looking for. I also sent you a PM

OutlawM92 · 07-20-2023, 11:15 AM

do you have a 68-72 LWB bedside, driver's side in good shape?

**HWY-STAR** · 07-21-2023, 11:02 AM

Quote:

Originally Posted by OutlawM92

do you have a 68-72 LWB bedside, driver's side in good shape?

No sir I do not have a good bedside. The one's I do have need major repairs.
I have a few friends that may have one, i can check around for you if you like.
Thanks. Dan

07-18-2023, 02:47 PM	#1
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 251	Oem custom cuttings I have alot of oem sheet metal that I can't get myself to scrap. This add is for cuttings from the following. 3 cabs 6 bedsides Frames Bed header panels Fenders Bumpers Doors Steal bed floor Hoods Radiator support--no PS lower flanges Grills Tail gate Uncut dash Good firewall Cab roof Suburban frame Prices are 20.00 to 150.00 plus shipping or you can pick up. Pm me what you need and we'll go from there. Thanks, Dan __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

07-18-2023, 03:53 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,210	Re: Oem custom cuttings Dan, I might be interested in a driver's door patch, possibly two. I will take a look at my door tonight and send a PM with what I need. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

07-18-2023, 04:14 PM	#3
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 251	Re: Oem custom cuttings OK, thank you Mark. __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

07-18-2023, 04:56 PM	#4
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Oem custom cuttings Dan - I need a driver's side front fender cup. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

07-18-2023, 05:01 PM	#5
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 251	Re: Oem custom cuttings Thanks AJ, I will let you know what I have this evening. __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

07-18-2023, 10:18 PM	#6
JEM Motorworks Junior Member Join Date: Jul 2014 Location: Loveland CO Posts: 54	Re: Oem custom cuttings I also need a left/ drivers side fender cup.

07-18-2023, 11:30 PM	#7
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 251	Re: Oem custom cuttings PM sent. Thank you __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

07-19-2023, 03:02 PM	#8
Hotrod1952 Registered User Join Date: Sep 2013 Location: Sioux Center IA Posts: 184	Re: Oem custom cuttings Any right rear bed side repair pieces? Looking for behind rear wheel up about 20" or so. Also PM your location if you have. Last edited by Hotrod1952; 07-19-2023 at 03:15 PM.

07-19-2023, 03:18 PM	#9
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 251	Re: Oem custom cuttings Hi there. I am 40 miles east of Rochester, MN. I have 3 RH bed sides. I will check them out this evening and let you know what I have. Thank you, Dan __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

07-19-2023, 03:58 PM	#10
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 833	Re: Oem custom cuttings Have any 4x4 frames?

07-19-2023, 04:03 PM	#11
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 251	Re: Oem custom cuttings No sir, I wish I did though. Thanks for asking. __________________ 72 sierra grande 402/400 72 longhorn 402/400 67 swb fleet side 350/350 buddy buckets tack/vac dash project 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed-FOR SALE 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod---sold 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles

07-20-2023, 11:02 AM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,210	Re: Oem custom cuttings Dan here is what I am looking for. I also sent you a PM Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

07-20-2023, 11:15 AM	#13
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: Oem custom cuttings do you have a 68-72 LWB bedside, driver's side in good shape? __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.