IL Parting out 82 Chevrolet K30 Silverado 4x4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 LONGHORN** · 03-15-2011, 07:09 PM

special-k, $33 shipped for the pair of front u-bolt plates, but it might be a week before I get the axles pulled out.

blackbeaSSt · 03-15-2011, 07:31 PM

ok longhorn shoot me a shipped price on the trim to 29625. i know that long piece is gonna be a pita so i don't wanna say yay or nay just yet till i see shipping!

48cj2a · 03-15-2011, 09:42 PM

I'll take the gauge cluster as long as there are no broken or cracked mounting tabs. Could use the mounting hardware too if possible.

Also need some torque converter to flywheel bolts and the support rods with hardware from tranny cover up to the motor mounts.

**72 LONGHORN** · 03-15-2011, 10:04 PM

48cj2a, here are close up pics of the gauge cluster.

48cj2a · 03-15-2011, 10:24 PM

Cluster looks good I'll take it. Can you double check and see if there is a special harness for the clock to work?

**72 LONGHORN** · 03-15-2011, 10:29 PM

48cj2a, I will cut off a section so you have the connector for the clock.

48cj2a · 03-15-2011, 10:34 PM

Quote:

Originally Posted by 72 LONGHORN

48cj2a, I will cut off a section so you have the connector for the clock.

Does it go to the harness or down to the fuze box?

Also how about dash and cab speakers, hardware and harnesses?

**72 LONGHORN** · 03-15-2011, 10:46 PM

Gauge cluster sold to 48cj2a. Thanks!

75gmc454 · 03-15-2011, 10:59 PM

Is the tilt column tight? Mine on my 82 is broke. It just flops around. Also my orignal steering wheel has been replaced with an aftermarket. Are the chrome handles in fair shape on this column?

What kind of price on the complete column with the wheel, horn cap and all levers.

**72 LONGHORN** · 03-15-2011, 11:07 PM

75gmc454, Tilt column is tight, chrome should clean up ok, steering wheel is good with no cracks. $125 for the complete column with wheel cap and all levers plus shipping.

**special-K** · 03-16-2011, 10:20 AM

Quote:

Originally Posted by 72 LONGHORN

special-k, $33 shipped for the pair of front u-bolt plates, but it might be a week before I get the axles pulled out.

You have a sale. Send me your info for a postal money order. I'm in no hurry,just will be needing them since I'm not sure if I still have any for the swap I'll be doing on my '72

hayesperformanceplus · 03-16-2011, 10:42 AM

The window switches are the wrong style for my truck....

Thank you for getting the pics for me thought!

BIGCHEVYMAN · 03-16-2011, 07:56 PM

how much for those dana 60 hub caps? i would need all four. thanks

junkyardjohn · 03-16-2011, 11:02 PM

I WOULD LIKE A SHIPPED PRICE TO 42501 (S/E KY.) ON THE COLLUM WITHOUT THE WHEEL. ALSO IS THE REAR A 14 BOLT FF?? & HOW MUCH FOR BOTH AXELS??..OPEN OR POSI DIFF.s.. PICKED UP OFCOARSE. THANKS JOHN

**72 LONGHORN** · 03-16-2011, 11:13 PM

Junkyardjohn, $100 plus shipping on the tilt column. Rear axle is a 14 bolt, axles are open and 4:10 gears. $1000 picked up
Posted via Mobile Device

BigRed76 · 03-16-2011, 11:15 PM

Does it still have the factory jack & handle?

**72 LONGHORN** · 03-17-2011, 09:42 AM

junkyardjohn, the price on the tilt column is $100 plus shipping. I'll have to wait until I get the column pulled so I can get thee correct weight and size for a shipping quote.

**oldwagon** · 03-17-2011, 10:32 AM

What kind of shape are the wing windows in as far as the locking mechanism and the seals?

**72 LONGHORN** · 03-17-2011, 12:22 PM

oldwagon, the vent windows aren't in very good condition.

**oldwagon** · 03-17-2011, 08:22 PM

Thanks, 72 LONGHORN.

john@thepier · 03-18-2011, 07:05 PM

I have interest in the axles front and rear and transmission and tranfercase maybe even the whole chassis as a roller if still available. John

**72 LONGHORN** · 03-18-2011, 07:12 PM

john@thepier, pm sent.

mcmlxix · 03-19-2011, 10:53 AM

I would be interested in the Dana 60 front.... if you can ship it.... 89129 or any freight terminal in 50 miles...

bowtiebuilder · 03-19-2011, 11:08 AM

Quote:

Originally Posted by 72 LONGHORN

bowtiebuilder, $25 plus shipping for both drip rail assemblys and $65 shipped for the steering gearbox.

sounds good, how do I pay you?

**72 LONGHORN** · 03-19-2011, 09:25 PM

mcmlxix, Sorry but no shipping on the axles.

03-15-2011, 07:09 PM	#26
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 special-k, $33 shipped for the pair of front u-bolt plates, but it might be a week before I get the axles pulled out.

03-15-2011, 07:31 PM	#27
blackbeaSSt Registered User Join Date: Sep 2010 Location: Anderson, SC Posts: 325	Re: Parting out 82 Chevrolet K30 Silverado 4x4 ok longhorn shoot me a shipped price on the trim to 29625. i know that long piece is gonna be a pita so i don't wanna say yay or nay just yet till i see shipping!

03-15-2011, 09:42 PM	#28
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: Parting out 82 Chevrolet K30 Silverado 4x4 I'll take the gauge cluster as long as there are no broken or cracked mounting tabs. Could use the mounting hardware too if possible. Also need some torque converter to flywheel bolts and the support rods with hardware from tranny cover up to the motor mounts. __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

03-15-2011, 10:04 PM	#29
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 48cj2a, here are close up pics of the gauge cluster. Attached Images

03-15-2011, 10:24 PM	#30
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: Parting out 82 Chevrolet K30 Silverado 4x4 Cluster looks good I'll take it. Can you double check and see if there is a special harness for the clock to work? __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

03-15-2011, 10:29 PM	#31
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 48cj2a, I will cut off a section so you have the connector for the clock.

03-15-2011, 10:46 PM	#33
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 Gauge cluster sold to 48cj2a. Thanks!

03-15-2011, 10:59 PM	#34
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: Parting out 82 Chevrolet K30 Silverado 4x4 Is the tilt column tight? Mine on my 82 is broke. It just flops around. Also my orignal steering wheel has been replaced with an aftermarket. Are the chrome handles in fair shape on this column? What kind of price on the complete column with the wheel, horn cap and all levers.

03-15-2011, 11:07 PM	#35
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 75gmc454, Tilt column is tight, chrome should clean up ok, steering wheel is good with no cracks. $125 for the complete column with wheel cap and all levers plus shipping.

03-16-2011, 10:42 AM	#37
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: Parting out 82 Chevrolet K30 Silverado 4x4 The window switches are the wrong style for my truck.... Thank you for getting the pics for me thought! __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS

03-16-2011, 07:56 PM	#38
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Parting out 82 Chevrolet K30 Silverado 4x4 how much for those dana 60 hub caps? i would need all four. thanks

03-16-2011, 11:02 PM	#39
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Parting out 82 Chevrolet K30 Silverado 4x4 I WOULD LIKE A SHIPPED PRICE TO 42501 (S/E KY.) ON THE COLLUM WITHOUT THE WHEEL. ALSO IS THE REAR A 14 BOLT FF?? & HOW MUCH FOR BOTH AXELS??..OPEN OR POSI DIFF.s.. PICKED UP OFCOARSE. THANKS JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 03-16-2011 at 11:03 PM.

03-16-2011, 11:13 PM	#40
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 Junkyardjohn, $100 plus shipping on the tilt column. Rear axle is a 14 bolt, axles are open and 4:10 gears. $1000 picked up Posted via Mobile Device

03-16-2011, 11:15 PM	#41
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Parting out 82 Chevrolet K30 Silverado 4x4 Does it still have the factory jack & handle? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

03-17-2011, 09:42 AM	#42
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 junkyardjohn, the price on the tilt column is $100 plus shipping. I'll have to wait until I get the column pulled so I can get thee correct weight and size for a shipping quote.



Register or Log In To remove these advertisements.

03-17-2011, 10:32 AM	#43
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 753	Re: Parting out 82 Chevrolet K30 Silverado 4x4 What kind of shape are the wing windows in as far as the locking mechanism and the seals?

03-17-2011, 12:22 PM	#44
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 oldwagon, the vent windows aren't in very good condition.

03-17-2011, 08:22 PM	#45
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 753	Re: Parting out 82 Chevrolet K30 Silverado 4x4 Thanks, 72 LONGHORN.

03-18-2011, 07:05 PM	#46
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: Parting out 82 Chevrolet K30 Silverado 4x4 I have interest in the axles front and rear and transmission and tranfercase maybe even the whole chassis as a roller if still available. John

03-18-2011, 07:12 PM	#47
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 john@thepier, pm sent.

03-19-2011, 10:53 AM	#48
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Parting out 82 Chevrolet K30 Silverado 4x4 I would be interested in the Dana 60 front.... if you can ship it.... 89129 or any freight terminal in 50 miles... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

03-19-2011, 09:25 PM	#50
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Parting out 82 Chevrolet K30 Silverado 4x4 mcmlxix, Sorry but no shipping on the axles.

Register or Log In To remove these advertisements.