The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-17-2013, 06:47 PM   #1
Knothead
Registered User
 
Knothead's Avatar
 
Join Date: Mar 2007
Location: south carolina
Posts: 247
"02 Z71 rearend noise

My rearend developed a whining noise thats constant. Doesn't change when cornering. Put it on stands in gear, if I stop right side tire it quits. Doesn't sound like axle bearing. Opened cover on rearend,different looking carrier than normal GM. Any ideas on what type carrier it is and possible noise?
Knothead is offline   Reply With Quote
Old 03-17-2013, 08:11 PM   #2
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: "02 Z71 rearend noise

Quote:
Originally Posted by Knothead View Post
My rearend developed a whining noise thats constant. Doesn't change when cornering. Put it on stands in gear, if I stop right side tire it quits. Doesn't sound like axle bearing. Opened cover on rearend,different looking carrier than normal GM. Any ideas on what type carrier it is and possible noise?
Pull the axles & check it out, The "G80" Gov-Loc locker is normal on later GM trucks.
clinebarger is offline   Reply With Quote
Old 03-17-2013, 08:16 PM   #3
Knothead
Registered User
 
Knothead's Avatar
 
Join Date: Mar 2007
Location: south carolina
Posts: 247
Re: "02 Z71 rearend noise

Are you thinking axle bearing? best bet replace all bearings pinion , carrier & axle or do these carriers problematic?
Knothead is offline   Reply With Quote
Old 03-17-2013, 08:46 PM   #4
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: "02 Z71 rearend noise

Quote:
Originally Posted by Knothead View Post
Are you thinking axle bearing? best bet replace all bearings pinion , carrier & axle or do these carriers problematic?
If its just a axle bearing, Replace that bearing....Got to remove the axle to know for sure. The bearing going bad also damages the axle, Repair bearings are junk...Have the axle welded & machined or buy a new axle.
clinebarger is offline   Reply With Quote
Old 03-18-2013, 08:12 AM   #5
Knothead
Registered User
 
Knothead's Avatar
 
Join Date: Mar 2007
Location: south carolina
Posts: 247
Re: "02 Z71 rearend noise

Thanks, It is the G80. I'm going to tear it down today.
Knothead is offline   Reply With Quote
Old 03-18-2013, 08:19 PM   #6
Knothead
Registered User
 
Knothead's Avatar
 
Join Date: Mar 2007
Location: south carolina
Posts: 247
Re: "02 Z71 rearend noise

With 225 K on the Ole Gal I guess it was time for an overhaul. The inner pinion bearing was probably the main culprit. There was also pitting on the carrier bearings also. I went ahead and replaced all bearings and seals. I cracked one of the shims for the carrier,are they difficult to find ?
Knothead is offline   Reply With Quote
Old 03-18-2013, 10:23 PM   #7
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: "02 Z71 rearend noise

Quote:
Originally Posted by Knothead View Post
With 225 K on the Ole Gal I guess it was time for an overhaul. The inner pinion bearing was probably the main culprit. There was also pitting on the carrier bearings also. I went ahead and replaced all bearings and seals. I cracked one of the shims for the carrier,are they difficult to find ?
They can be impossible to find in the factory 1-piece version, An aftermarket shim kit will work.
clinebarger is offline   Reply With Quote
Old 03-19-2013, 05:58 AM   #8
Knothead
Registered User
 
Knothead's Avatar
 
Join Date: Mar 2007
Location: south carolina
Posts: 247
Re: "02 Z71 rearend noise

Thanks,I'll try junk yard first, if no luck there then parts store for a shim kit
Knothead is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com