The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-30-2020, 11:56 PM   #1
elkniks
Active Member

 
elkniks's Avatar
 
Join Date: Mar 2015
Location: Seaside,CA
Posts: 134
window track inside door

Is the short piece of track for the widow regulator spot welded onto the inside of the door? I installed a P.O.S. power window kit years ago and had to remove the piece of track on the inside of the door and cut out the stop at the bottom of the door. I now want to go back to an original style regulator. I can fab a window stop but I am not sure about the short piece of track. I am not ruling out just finding a decent set of truck doors and cutting them. My drivers door has some serious rust in the back corner. Both of the doors I have now are cut truck doors.
elkniks is offline   Reply With Quote
Old 07-01-2020, 02:06 AM   #2
randy500
Senior Member
 
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 7,929
Re: window track inside door

The rear track does bolt in, i have some for sale if needed, send me a PM if interested.
randy500 is online now   Reply With Quote
Old 07-01-2020, 07:03 AM   #3
bigmac73
Senior Member
 
bigmac73's Avatar
 
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,182
Re: window track inside door

there is a good video on U tube for tearing down and putting the doors back together

https://no-click.mil/?https://youtu.be/RY3yXCjqkZE
__________________
Mike
72 C-10 Cheyenne PS/PB/Tilt/Tach/Rear slider/
385HP/405TQ Vortec 355 /TH350 2200RPM Stall
MSD Ignition/Holley 650 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks
bigmac73 is offline   Reply With Quote
Old 07-01-2020, 12:19 PM   #4
Davidf
Registered User
 
Join Date: Nov 2014
Location: Austin
Posts: 353
Re: window track inside door

Quote:
Originally Posted by elkniks View Post
Is the short piece of track for the widow regulator spot welded onto the inside of the door? I installed a P.O.S. power window kit years ago and had to remove the piece of track on the inside of the door and cut out the stop at the bottom of the door. I now want to go back to an original style regulator. I can fab a window stop but I am not sure about the short piece of track. I am not ruling out just finding a decent set of truck doors and cutting them. My drivers door has some serious rust in the back corner. Both of the doors I have now are cut truck doors.
The answer to your first question is yes.
Davidf is offline   Reply With Quote
Old 07-01-2020, 02:43 PM   #5
elkniks
Active Member

 
elkniks's Avatar
 
Join Date: Mar 2015
Location: Seaside,CA
Posts: 134
Re: window track inside door

Yep, I was kind of figuring that since I could not find that piece of track online anywhere. Thanks!
elkniks is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com