Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-05-2019, 03:59 PM | #1 |
Registered User
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
|
Replacing oil cooler lines
Just had a oil cooler line fail and luckily saw the smoke screen behind me. I see oil pouring out at the filter so I am assuming the quick connect fitting failed. I will check to be sure next week. Just had it towed in and parked it.
Reading on these quick connects on the oil lines, I want to just replace them. Anyone cut the line and replaced the quick release the adaptor fitting with compression flare nut fittings? Or spliced in a short length of braided line with AN fittings? Should be able to replace this engine in a few weeks and DO NOT want this to happen again and ruin my new engine. So looking to upgrade to something I can trust. Want to use this as a tow vehicle and sure don't want an issue in the middle of nowhere. BTW Post in the engine section too Last edited by Kudzupatch; 01-05-2019 at 07:15 PM. |
Bookmarks |
|
|