The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 01-12-2015, 10:21 PM   #1
cbbeard
Registered User
 
Join Date: Apr 2014
Location: Beaumont, TX
Posts: 34
My DIY Door Panel Restoration

So my son and I are rebuilding a 1984 GMC Stepside to be his first truck. He gets his license soon, and we are getting closer to being done. I thought I would share the process of restoring the door panels, since I was surprised at how well they turned out.

When we started tearing the truck apart, we weren't careful at all with the door panels because they were so nasty. But we stashed them in the shed and now that we are a year into the project, we are almost (way past actually) out of money. So we decided to try to restore them, as well as the nasty cracked dashboard.

The door panels had the usual wear and tear, and much of it was covered in the chalky sun-destroyed plastic.




The first thing I did is take a sanding block and some 100 grit sandpaper to the panels to knock off the chalky plastic.


Then once it was fairly smooth, I used a jitterbug sander to try to smooth out the uneven plastic with 100 grit. I probably could have done this from the beginning, but I didn't want to be too aggressive at first. I also used some of the padded dash filler I had on hand for repairing the dash for any deep spots.



You can see that there was still a little unevenness in appearance, but it was mostly in appearance, and it felt very smooth. Next I sprayed the panels with two coats of plastic adhesion promoter to ensure that the paint would stick well. After the adhesion promoter came a few coats of SEM Texture Coating. This would give it a uniform texture, since I sanded off most of the texture, and would match the texture of the dash I'm redoing as well.




I gave the texture coat a light sanding with 800 grit to ensure an even texture all over. Next came the paint. Because we wanted to match the painted interior color, I had to pay a pretty penny for PPG Deltron DBC with a basecoat activator (as in 100 bucks for a pint). But I was actually glad I did because the color went on very nice.




The picture above includes the glove box, and you can see how nicely the color of the panel matches the original interior paint. By the way, I also painted the panel pockets and the door handle straps with the same paint, using plastic adhesion promoter first.

And here is the finished product.


The only new parts on this door were the door handle strap covers, the fabric insert, the door handle pad, and the carpet lower panel. I was very pleased at how they turned out! If you have any questions, let me know, but I think this is a very doable project for anyone.
cbbeard is offline  
Old 01-12-2015, 11:10 PM   #2
Duvall
Registered User
 
Join Date: Dec 2011
Location: Hanford Ca.
Posts: 65
Re: My DIY Door Panel Restoration

Very nice job! It looks great and its OEM.
Duvall is offline  
Old 01-12-2015, 11:16 PM   #3
cbbeard
Registered User
 
Join Date: Apr 2014
Location: Beaumont, TX
Posts: 34
Re: My DIY Door Panel Restoration

Thanks! I was really amazed at how well it all came together, particularly the texture coat. I was very pleased with the uniform texture.
cbbeard is offline  
Old 01-12-2015, 11:39 PM   #4
kalbert
Registered User
 
Join Date: Jun 2012
Location: Minnesota
Posts: 507
Re: My DIY Door Panel Restoration

Wow that looks great. I'm going to have to try to resurrect my panels this way.
kalbert is offline  
Old 01-13-2015, 12:20 AM   #5
old Rusty C10
Robert Olson Transport

 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: Howell NJ USA and a house in Deposit NY USA
Posts: 19,249
Re: My DIY Door Panel Restoration

this is a definite good way to refurbish panels this should probably be submitted as a FAQ
__________________
Bob


1982 Chevrolet C10 LWB 2wd
1979 Chevrolet C20 LWB 2wd
1980 Chevrolet C10 SWB 2wd
1971 Chevrolet Monte Carlo
1966 Ford Mustang
2018 Subaru Forrester (wifes ride)
2014 Ram Bighorn SLT 4X4 Longbed Diesel
1992 Dodge Dakota ECSB 4X4
1992 Ford Superduty flatbed tow truck
2004 Dodge reg cab swb 2wd
2014 Harley Davidson Heritage Softtail


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline  
Old 01-13-2015, 12:21 AM   #6
chevy-fun
Registered User
 
chevy-fun's Avatar
 
Join Date: Jun 2011
Location: Arlington, Tx
Posts: 339
Re: My DIY Door Panel Restoration

....
chevy-fun is offline  
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com