Lets see some 1960 - 1966 engine bays - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kenfuzed · 01-10-2017, 02:21 AM

Wow that's a beefy air filter.

'63GENIII · 01-11-2017, 03:07 AM

Quote:

Originally Posted by Kenfuzed

Wow that's a beefy air filter.

Yeah it is kinda big now that I think about it. Its used on on mining equipment. Supposed to filter way better than an oiled filter and get upwards of 30-40k miles before replacing. It was free too. Beefy filter will stay there for now. Im too broke to get a different one, LOL.

65Robb · 01-11-2017, 10:49 AM

My 65 c10 crate engine swap

Kenfuzed · 01-11-2017, 11:23 AM

Quote:

Originally Posted by '63GENIII

Yeah it is kinda big now that I think about it. Its used on on mining equipment. Supposed to filter way better than an oiled filter and get upwards of 30-40k miles before replacing. It was free too. Beefy filter will stay there for now. Im too broke to get a different one, LOL.

No I like it, love to see innovative and re-purposed items like this.

cru_zn_29 · 01-11-2017, 11:37 AM

New bullet LY5/4l80/373 posi for my 66 short bed. I have 3900 miles in last few months and is a blast to drive.

**Classic v6 GMC's** · 01-11-2017, 11:46 AM

Quote:

Originally Posted by cru_zn_29

New bullet LY5/4l80/373 posi for my 66 short bed. I have 3900 miles in last few months and is a blast to drive.

WOW!! That is very clean. Do you have a build thread?

graymage · 02-08-2017, 12:10 AM

well its not in a bay yet but its in the Frame

norust · 02-11-2017, 12:23 PM

1966 1/2 ton SWB with a 409 stroker dual carbs: my friend's project.

norust · 02-11-2017, 12:26 PM

2nd shot of 409 in the truck

**nsb29** · 02-11-2017, 10:01 PM

Quote:

Originally Posted by cru_zn_29

New bullet LY5/4l80/373 posi for my 66 short bed. I have 3900 miles in last few months and is a blast to drive.

can I drive it! can I drive it! LOL looks grate

cru_zn_29 · 02-12-2017, 10:20 AM

Quote:

Originally Posted by nsb29

can I drive it! can I drive it! LOL looks grate

OK ( one time only)

MacQuigley · 02-12-2017, 05:36 PM

First trial fit of my engine in my 62 build today.

Seems as it its angled down a bit much at the rear but I cant see how that can be. Anyway its back out now. I need to move the mounts forward a bit still as I didn't have the cab in quite the right position in these pictures and the clearance is now just too tight. It will get there!

**Captainfab** · 02-13-2017, 01:25 AM

To get a big block in just the right spot takes a little time. It looks like you have some sort of adapter plate between the engine mount and the block?

**nsb29** · 02-13-2017, 09:42 AM

Quote:

Originally Posted by cru_zn_29

OK ( one time only)

By myself ???

**nsb29** · 02-13-2017, 09:48 AM

I need to start a thread (what I didn't get done today ) LOL

cru_zn_29 · 02-13-2017, 11:20 AM

Quote:

Originally Posted by nsb29

I need to start a thread (what I didn't get done today ) LOL

Looking like a truck again not just a pile of parts.I am liking that color more & more.

cru_zn_29 · 02-13-2017, 12:18 PM

Quote:

Originally Posted by Classic v6 GMC's

WOW!! That is very clean. Do you have a build thread?

Sorry no build thread. I have some pictures on my home page

MacQuigley · 02-13-2017, 05:04 PM

Quote:

Originally Posted by Captainfab

To get a big block in just the right spot takes a little time. It looks like you have some sort of adapter plate between the engine mount and the block?

I got them in my last shipment John. Cant remember the make but I'll check when I get home.

I'll have to move the mounts one hole forward or I may have someone make me up a slightly different plate that gives me about 1/4-1/2" more forward movement.

But Im sure that 454 goes into 1 (engine bay that is).

scoot_mcgrute · 02-13-2017, 05:40 PM

Here's mine for now. LS going in soon!

lowslow64 · 02-13-2017, 06:58 PM

New 292! Should start up this month.

**Captainfab** · 02-14-2017, 12:47 AM

I've never seen anything like that except on an LS installation. When I put the 454 in my '66 Suburban 25 years ago, I fabricated my own set of custom engine mount brackets. I didn't want it too far back or too far forward and that just seemed to be the simplest solution.

Quote:

Originally Posted by MacQuigley

I got them in my last shipment John. Cant remember the make but I'll check when I get home.

I'll have to move the mounts one hole forward or I may have someone make me up a slightly different plate that gives me about 1/4-1/2" more forward movement.

But Im sure that 454 goes into 1 (engine bay that is).

BurbN · 02-17-2017, 12:42 AM

lowslow64, That's a SWEET 292! What kind of HP are you expecting???

-Chad

lowslow64 · 02-19-2017, 11:22 AM

Stock this engine put out 165 hp. Have not tested it, but hope to 250-300.
Thanks

HeavyChevy81 · 02-20-2017, 10:07 PM

Ill bite, My sons 66, 355 SBC, and my 80 Square 540

Name: lil red 3.jpg
Views: 619
Size: 48.0 KB

My sons 66
Name: barney 2.jpg
Views: 628
Size: 54.5 KB

My 80 Square

graymage · 03-21-2017, 10:34 PM

a little farther along, cab next

01-10-2017, 02:21 AM	#376
Kenfuzed Registered User Join Date: Jun 2014 Location: Glendora CA -> Tampa FL Posts: 587	Re: Lets see some 1960 - 1966 engine bays Wow that's a beefy air filter. __________________ 1966 C10 Short Fleetside 1988 Sportster, 2008 Street Glide Ken's 1966 C10 build "Red Ale" Follow on Instgram: @cv_performance https://instagram.com/cv_performance Harley Performance Parts: CV Performance (Harley related) Enjoying the ride!

01-11-2017, 10:49 AM	#378
65Robb Registered User Join Date: Jul 2016 Location: Gooding,Idaho Posts: 158	Re: Lets see some 1960 - 1966 engine bays My 65 c10 crate engine swap Attached Images

01-11-2017, 11:37 AM	#380
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: Lets see some 1960 - 1966 engine bays New bullet LY5/4l80/373 posi for my 66 short bed. I have 3900 miles in last few months and is a blast to drive. Attached Images

02-08-2017, 12:10 AM	#382
graymage Registered User Join Date: Jan 2017 Location: hastings, ne Posts: 81	Re: Lets see some 1960 - 1966 engine bays well its not in a bay yet but its in the Frame Attached Images

02-11-2017, 12:23 PM	#383
norust Registered User Join Date: Mar 2014 Location: Spokane, Washington Posts: 24	Re: Lets see some 1960 - 1966 engine bays 1966 1/2 ton SWB with a 409 stroker dual carbs: my friend's project. Attached Images

02-11-2017, 12:26 PM	#384
norust Registered User Join Date: Mar 2014 Location: Spokane, Washington Posts: 24	Re: Lets see some 1960 - 1966 engine bays 2nd shot of 409 in the truck

02-12-2017, 05:36 PM	#387
MacQuigley Registered User Join Date: Aug 2015 Location: Scotland Posts: 737	Re: Lets see some 1960 - 1966 engine bays First trial fit of my engine in my 62 build today. Seems as it its angled down a bit much at the rear but I cant see how that can be. Anyway its back out now. I need to move the mounts forward a bit still as I didn't have the cab in quite the right position in these pictures and the clearance is now just too tight. It will get there!

02-13-2017, 01:25 AM	#388
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Lets see some 1960 - 1966 engine bays To get a big block in just the right spot takes a little time. It looks like you have some sort of adapter plate between the engine mount and the block? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-13-2017, 09:48 AM	#390
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Lets see some 1960 - 1966 engine bays I need to start a thread (what I didn't get done today ) LOL Attached Images

02-13-2017, 05:40 PM	#394
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: Lets see some 1960 - 1966 engine bays Here's mine for now. LS going in soon! Attached Images __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-13-2017, 06:58 PM	#395
lowslow64 Registered User Join Date: Dec 2009 Location: Rockwall Texas Posts: 79	Re: Lets see some 1960 - 1966 engine bays New 292! Should start up this month. Attached Images

02-17-2017, 12:42 AM	#397
BurbN Registered User Join Date: Aug 2016 Location: Kansas Posts: 51	Re: Lets see some 1960 - 1966 engine bays lowslow64, That's a SWEET 292! What kind of HP are you expecting??? -Chad

02-19-2017, 11:22 AM	#398
lowslow64 Registered User Join Date: Dec 2009 Location: Rockwall Texas Posts: 79	Re: Lets see some 1960 - 1966 engine bays Stock this engine put out 165 hp. Have not tested it, but hope to 250-300. Thanks

02-20-2017, 10:07 PM	#399
HeavyChevy81 Registered User Join Date: Nov 2014 Location: West Texas Posts: 30	Re: Lets see some 1960 - 1966 engine bays Ill bite, My sons 66, 355 SBC, and my 80 Square 540 My sons 66 My 80 Square

03-21-2017, 10:34 PM	#400
graymage Registered User Join Date: Jan 2017 Location: hastings, ne Posts: 81	Re: Lets see some 1960 - 1966 engine bays a little farther along, cab next Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.