292 motor mounts used in swap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

botoepfer · 12-28-2017, 11:13 AM

hello folks I am doing a bit of research on building motor mounts to drop a 292 in place of my 230,, love to see what you have done !

vin63 · 12-28-2017, 11:56 AM

There are a few people making the conversion mounts. Generally, you'll need to go with an electric fuel pump since the adapter plate covers the mechanical fuel pump location.

https://www.12bolt.com/store/p40/Ste...t_Adaptor.html

botoepfer · 12-28-2017, 12:03 PM

Thanks vin63 I am trying to retain the mech pump,, But Tom Lowe has some cool stuff !

T2vigil · 12-28-2017, 01:18 PM

Don't know the right or wrong of it but I used a driver side motor mount and three 1" spacers. The spacers were made out of 3/8" galvanized pipe placed between the block and the motor mount. Poor mans fix and everything is straight and level. The benefit is being able to use the mechanical fuel pump.

botoepfer · 12-28-2017, 02:19 PM

Quote:

Originally Posted by T2vigil

Don't know the right or wrong of it but I used a driver side motor mount and three 1" spacers. The spacers were made out of 3/8" galvanized pipe placed between the block and the motor mount. Poor mans fix and everything is straight and level. The benefit is being able to use the mechanical fuel pump.

can you send me a picture please?

T2vigil · 12-28-2017, 04:36 PM

I stand corrected. The bottom two bolts are the ones with the 1" spacer. I do have photos takes today. All I need to do is find a way to add photos.

padresag · 12-28-2017, 04:38 PM

just get the passenger side frame perch for a 292 instead of MM'ing it.
ron

botoepfer · 12-28-2017, 10:00 PM

Quote:

Originally Posted by padresag

just get the passenger side frame perch for a 292 instead of MM'ing it.
ron

Not sure I follow you,, !

padresag · 12-28-2017, 10:05 PM

mm stands for Mickey Mouse
ron

**Captainfab** · 12-29-2017, 12:54 AM

I agree.....just use the correct engine mount bracket. I probable have a couple laying around.

Quote:

Originally Posted by padresag

just get the passenger side frame perch for a 292 instead of MM'ing it.
ron

T2vigil · 12-29-2017, 11:32 AM

When I was doing my search it seamed like nobody had them or they wanted an are and a leg for them. Since I am not doing a correct restoration I made do. As far as Mickey is concerned what I did was structurally sound.

botoepfer · 03-01-2018, 01:30 PM

Quote:

Originally Posted by Captainfab

I agree.....just use the correct engine mount bracket. I probable have a couple laying around.

capt fab are willing to part with the mount?

Short 3/4 · 03-01-2018, 02:46 PM

Quote:

Originally Posted by botoepfer

capt fab are willing to part with the mount?

If The Captain can't help you, I have one I will sell for $40.00 plus whatever for shipping. I assume this is for a 2wd? Mine came out of a 66.
Tom

**Captainfab** · 03-02-2018, 12:12 AM

I will have to look and see if I do still have any. Do you need just the passenger side?

Quote:

Originally Posted by botoepfer

capt fab are willing to part with the mount?

12-28-2017, 11:13 AM	#1
botoepfer Registered User Join Date: Dec 2017 Location: Prince Frederick/obx Posts: 106	292 motor mounts used in swap! hello folks I am doing a bit of research on building motor mounts to drop a 292 in place of my 230,, love to see what you have done !

12-28-2017, 11:56 AM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,261	Re: 292 motor mounts used in swap! There are a few people making the conversion mounts. Generally, you'll need to go with an electric fuel pump since the adapter plate covers the mechanical fuel pump location. https://www.12bolt.com/store/p40/Ste...t_Adaptor.html __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

12-28-2017, 12:03 PM	#3
botoepfer Registered User Join Date: Dec 2017 Location: Prince Frederick/obx Posts: 106	Re: 292 motor mounts used in swap! Thanks vin63 I am trying to retain the mech pump,, But Tom Lowe has some cool stuff !

12-28-2017, 01:18 PM	#4
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: 292 motor mounts used in swap! Don't know the right or wrong of it but I used a driver side motor mount and three 1" spacers. The spacers were made out of 3/8" galvanized pipe placed between the block and the motor mount. Poor mans fix and everything is straight and level. The benefit is being able to use the mechanical fuel pump.

12-28-2017, 04:36 PM	#6
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: 292 motor mounts used in swap! I stand corrected. The bottom two bolts are the ones with the 1" spacer. I do have photos takes today. All I need to do is find a way to add photos.

12-28-2017, 04:38 PM	#7
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 292 motor mounts used in swap! just get the passenger side frame perch for a 292 instead of MM'ing it. ron

12-28-2017, 10:05 PM	#9
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 292 motor mounts used in swap! mm stands for Mickey Mouse ron

12-29-2017, 11:32 AM	#11
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: 292 motor mounts used in swap! When I was doing my search it seamed like nobody had them or they wanted an are and a leg for them. Since I am not doing a correct restoration I made do. As far as Mickey is concerned what I did was structurally sound.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.