RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SparkyRnD** · 08-15-2017, 06:40 PM

Unfortunately we don't have a way to do that. I believe Jiffy-tite has some types of disconnect fittings that may bridge the gap though.

**SparkyRnD** · 09-17-2017, 06:54 PM

back up

Steve Cole · 09-27-2017, 02:12 PM

Any chance you could post the specs on your fans? Particularly CFM's and current draw, but the full specs would be nice. Are the fans American made as well? Thanks.

**SparkyRnD** · 10-01-2017, 02:25 PM

We have several dozen fans that we carry depending on diameter, depth, speed, etc and it varies on each application. I believe all of the fans are imported.

What we do is get engine / trans / application info, if there are any power adders, what the vehicle is used for, and location information. We use that to determine which fan(s) would be best suited and that is what we recommend. Available space also has a bit to do with it.

**SparkyRnD** · 10-13-2017, 11:37 AM

bump

**truckdude239** · 10-16-2017, 09:21 PM

Have a 71 c10 with 4.8ls 4l60e how much for a radiator and fan set up with the ls ports on passager side and a trans cooler i currently have a griffin ls rad that has sprung a leak after only 4 years which sucks...

**SparkyRnD** · 10-18-2017, 06:00 PM

David, thanks for contacting us. The price with discount is $425 for the radiator, and we never charge extra for any of the following:
LS configuration ports
Steam Port
Built-in Trans Cooler

For the fans, I'd need to know about how the engine is built (hp & torque), and if there are any power adders (turbo, supercharger, nitrous). Let me know and I can provide recommendations.

**truckdude239** · 10-18-2017, 10:00 PM

Its a stock 4.8l i think it makes 280 hp

**SparkyRnD** · 10-19-2017, 11:23 AM

Ok, then our standard dual 12's will be fine. That is $220 after discount, and $75 for the controller with relay (not needed if you have a relay set up in your harness for fans). Shipping on that setup will be $55.

**SparkyRnD** · 11-10-2017, 01:11 PM

thanks for the orders!

carbuff382 · 11-14-2017, 10:49 PM

Quote:

Originally Posted by SparkyRnD

thanks for the orders!

Hello Sparky,
So I need the LS conversion radiator for my 70, and I have the smaller 3 row metal mounts with the rubber inserts. This will work with your radiator correct? Also, I need the tranny cooler and can you make the intake(upper hose connection the same size as the lower)?
Thanks,

**SparkyRnD** · 11-15-2017, 12:25 PM

Yes, that'll work with our setup. We make the LS ports on the passenger side and they are the same size inlet / outlet. We also include a steam port at no additional cost.

carbuff382 · 11-15-2017, 12:35 PM

Quote:

Originally Posted by SparkyRnD

Yes, that'll work with our setup. We make the LS ports on the passenger side and they are the same size inlet / outlet. We also include a steam port at no additional cost.

OK, so how much shipped to 87111 and do you have it in stock?
Thanks,

**SparkyRnD** · 11-15-2017, 12:55 PM

I had replied to your email earlier as well (but you may not have seen it). We make everything to order, and currently we're on a 1.5-2 week turnaround (maybe a little faster). Shipping is $65, and the radiator (after forum member discount) is $425. Let me know if you'd like to set up an order (I can email you the invoice with payment instructions).

carbuff382 · 11-15-2017, 01:06 PM

Quote:

Originally Posted by SparkyRnD

I had replied to your email earlier as well (but you may not have seen it). We make everything to order, and currently we're on a 1.5-2 week turnaround (maybe a little faster). Shipping is $65, and the radiator (after forum member discount) is $425. Let me know if you'd like to set up an order (I can email you the invoice with payment instructions).

Yes, I'd like to get one ordered, also is the core approx. 28" wide? The fan set-up I have is for a minimum of 28" wide core.
Thanks,

**SparkyRnD** · 11-19-2017, 02:47 PM

Thanks for the order!

carbuff382 · 11-30-2017, 12:29 PM

Quote:

Originally Posted by SparkyRnD

Thanks for the order!

Hello Sparky,
Sent you an email as well, when should I anticipate receiving my radiator?
Thanks,
Marc

**SparkyRnD** · 12-03-2017, 02:40 PM

I had replied the other day, but just saw this as well. It'll be shipping out tomorrow and I already emailed tracking and a copy of the invoice.

birkinsb · 12-17-2017, 04:18 AM

Looking to get a radiator for a 1970 2wd blazer ls swap 5.3 stock with 4l60 trans would like it with trans cooler , steam port , fans and relay kit to 92807

**SparkyRnD** · 12-17-2017, 02:12 PM

birkinsb, thanks for contacting us. The price for the radiator is $425 ($450 retail), standard dual 12" fans are $225 ($245 retail), relay kit is $75, and shipping is $80. Total is $805 shipped after discounts.

Note that we never charge extra for a transmission cooler, changing the ports to LS application, or for the steam port. If you would like to proceed with an order, send me a private message with your email address and your full shipping address and I will put together an invoice and email it to you. Thanks and let me know if you have any other questions

sangell · 12-19-2017, 05:23 PM

Sent you a PM with my email address and some questions.

Thanks

**SparkyRnD** · 12-22-2017, 11:28 AM

replied, thanks!

**SparkyRnD** · 12-29-2017, 11:06 AM

bump

**SparkyRnD** · 01-11-2018, 03:41 PM

back up again

**SparkyRnD** · 01-25-2018, 03:26 PM

up top

08-15-2017, 06:40 PM	#201
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Unfortunately we don't have a way to do that. I believe Jiffy-tite has some types of disconnect fittings that may bridge the gap though. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

09-17-2017, 06:54 PM	#202
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

09-27-2017, 02:12 PM	#203
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,623	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Any chance you could post the specs on your fans? Particularly CFM's and current draw, but the full specs would be nice. Are the fans American made as well? Thanks.

10-01-2017, 02:25 PM	#204
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! We have several dozen fans that we carry depending on diameter, depth, speed, etc and it varies on each application. I believe all of the fans are imported. What we do is get engine / trans / application info, if there are any power adders, what the vehicle is used for, and location information. We use that to determine which fan(s) would be best suited and that is what we recommend. Available space also has a bit to do with it. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

10-13-2017, 11:37 AM	#205
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! bump __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

10-16-2017, 09:21 PM	#206
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,216	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Have a 71 c10 with 4.8ls 4l60e how much for a radiator and fan set up with the ls ports on passager side and a trans cooler i currently have a griffin ls rad that has sprung a leak after only 4 years which sucks... __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-18-2017, 06:00 PM	#207
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! David, thanks for contacting us. The price with discount is $425 for the radiator, and we never charge extra for any of the following: LS configuration ports Steam Port Built-in Trans Cooler For the fans, I'd need to know about how the engine is built (hp & torque), and if there are any power adders (turbo, supercharger, nitrous). Let me know and I can provide recommendations. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

10-18-2017, 10:00 PM	#208
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,216	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Its a stock 4.8l i think it makes 280 hp __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-19-2017, 11:23 AM	#209
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Ok, then our standard dual 12's will be fine. That is $220 after discount, and $75 for the controller with relay (not needed if you have a relay set up in your harness for fans). Shipping on that setup will be $55. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-10-2017, 01:11 PM	#210
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! thanks for the orders! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-15-2017, 12:25 PM	#212
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Yes, that'll work with our setup. We make the LS ports on the passenger side and they are the same size inlet / outlet. We also include a steam port at no additional cost. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-15-2017, 12:55 PM	#214
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! I had replied to your email earlier as well (but you may not have seen it). We make everything to order, and currently we're on a 1.5-2 week turnaround (maybe a little faster). Shipping is $65, and the radiator (after forum member discount) is $425. Let me know if you'd like to set up an order (I can email you the invoice with payment instructions). __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-19-2017, 02:47 PM	#216
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Thanks for the order! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-03-2017, 02:40 PM	#218
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! I had replied the other day, but just saw this as well. It'll be shipping out tomorrow and I already emailed tracking and a copy of the invoice. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-17-2017, 04:18 AM	#219
birkinsb Registered User Join Date: Sep 2017 Location: anaheim Posts: 40	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Looking to get a radiator for a 1970 2wd blazer ls swap 5.3 stock with 4l60 trans would like it with trans cooler , steam port , fans and relay kit to 92807



Register or Log In To remove these advertisements.

12-17-2017, 02:12 PM	#220
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! birkinsb, thanks for contacting us. The price for the radiator is $425 ($450 retail), standard dual 12" fans are $225 ($245 retail), relay kit is $75, and shipping is $80. Total is $805 shipped after discounts. Note that we never charge extra for a transmission cooler, changing the ports to LS application, or for the steam port. If you would like to proceed with an order, send me a private message with your email address and your full shipping address and I will put together an invoice and email it to you. Thanks and let me know if you have any other questions __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-19-2017, 05:23 PM	#221
sangell Registered User Join Date: Jun 2015 Location: Overland Park KS Posts: 173	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Sent you a PM with my email address and some questions. Thanks

12-22-2017, 11:28 AM	#222
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! replied, thanks! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-29-2017, 11:06 AM	#223
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! bump __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-11-2018, 03:41 PM	#224
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up again __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-25-2018, 03:26 PM	#225
SparkyRnD Senior Member Join Date: Dec 2011 Location: acworth georgia Posts: 885	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! up top __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.