|
05-11-2017, 04:44 PM
|
#1 |
|
Registered User
Join Date: Nov 2015
Location: Jemez Springs, NM
Posts: 434
|
Radiator Support
I am having some issues with my radiator support and am talking to two guys that have a lot of experience with them.
One says there should be a piece of steel across the top of the support that is welded in place. The other guy says GMC had a closed support, and chevy's was open at the top Mine is U shaped with nothing across the top and can not see where a piece would go Who is correct |
|
|
|
05-11-2017, 07:19 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,314
|
Re: Radiator Support
The bottoms of the Chevy and GMC core supports are a lot different.
 The GMC being angled down more to reach the lower mounting point on the crossmember. The chevy also has the angle piece across the top that I don't believe has You can see it on the Chevy units in the photo even though they are upside down. I've had and also worked on a lot of AD Chevys that had had that cross piece removed when the engine was pulled an wasn't put back when the engine was put back.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
05-11-2017, 09:37 PM
|
#3 |
|
Registered User
Join Date: Nov 2015
Location: Jemez Springs, NM
Posts: 434
|
Re: Radiator Support
Yep. I see the angle that runs across the top. When I look at the two that I have, it looks like something has been cut off of both of them
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
