Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-19-2006, 12:26 PM | #1 |
Senior Member
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,764
|
2006 WT 4x4 Stainless grill mesh
used same stainless mesh material on both my 67 and 06
Last edited by dennislbrooks; 08-19-2006 at 12:28 PM. |
08-19-2006, 04:21 PM | #2 |
Active Member
Join Date: Dec 2005
Location: Bethlehem, PA
Posts: 346
|
Re: 2006 WT 4x4 Stainless grill mesh
Dennis,
Are you going to keep the plastic honeycomb on the '06? I have a '67 and '06 too. Love how the grills are similar. Got a source for the mesh? Thanks, Mike D.
__________________
The older I get, the faster I was!! |
08-20-2006, 06:39 AM | #3 |
Senior Member
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,764
|
Re: 2006 WT 4x4 Stainless grill mesh
Hi Nitromike, yea was planning on keeping the honeycomb on the 06 - kind of a stock guy. My ss mesh is 8 wires per inch an .032. Larger wire and heavier would look nice also if you can find it. Optimum amount is about 24-25 sguare feet. 6x4 I think the 316 shines a little more than the 304.
http://www.twpinc.com/twp/jsp/produc...=431&page=data http://www.twpinc.com/twp/jsp/produc...=509&page=data I have enough 1/8 left for a 67 and an 06. Last edited by dennislbrooks; 08-20-2006 at 06:40 AM. |
Bookmarks |
|
|