OR 1971 K20 parts F/S - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

54blackhornet · 01-27-2015, 05:01 PM

Thomas, do you know if Tom is going to LaGrande soon ? I asked him about Eyebrow retaining clips for drivers side GMC fender, I got the trim from Tom but need the clips. You can mail them if not ! Thanks

7dee2 · 01-27-2015, 05:34 PM

Quote:

Originally Posted by DLTruck1973

We still have plenty of nice pieces here.

Let me know what your needs are.

Thank you,
Thomas

PM sent

Resto-Rand · 01-27-2015, 06:53 PM

Quote:

Originally Posted by DLTruck1973

I will take a look for you and see what we have. May not be 100% perfect but will work for you. Give me some time to dig one up and check condition. Is this
for a 71 Pick up? or what year?

Thank you for the interest,
Thomas

Anything turn up?

DLTruck1973 · 01-27-2015, 07:27 PM

Quote:

Originally Posted by Resto-Rand

Anything turn up?

Here is the only one I have now. It has some rust holes in it. It will be $58.00 shipped in a medium flat rate box with the tube.

Here are some photos.

Let me know and thank you,
Thomas

Resto-Rand · 01-28-2015, 01:15 AM

Thanks, but I'm looking for the one that has a 45 degree angle toward the back to fit the exhaust.

Thanks for checking for me.

DLTruck1973 · 01-28-2015, 02:06 AM

Quote:

Originally Posted by 54blackhornet

Thomas, do you know if Tom is going to LaGrande soon ? I asked him about Eyebrow retaining clips for drivers side GMC fender, I got the trim from Tom but need the clips. You can mail them if not ! Thanks

Hi Jack,

Send me a PM with your address and I will send the clips up to you tomorrow in a bubble wrap envelope.

Thank you,
Thomas

DLTruck1973 · 01-28-2015, 01:01 PM

Quote:

Originally Posted by Resto-Rand

Thanks, but I'm looking for the one that has a 45 degree angle toward the back to fit the exhaust.

Thanks for checking for me.

The one I have here is from a 72 C20 with a 350 and fits on a 2wd manifold. Here is a photo for you to look at.

Let me know,

Thank you again,
Thomas

chevroletman223 · 01-29-2015, 12:28 AM

Do you happen to have a drag link/tie rod connector for a 71 4wd? If so, whats the price shipped to 13438? towing company bent mine into a V when I bought the truck and had it delivered.

Thanks! -Dan

DLTruck1973 · 01-29-2015, 12:46 AM

Quote:

Originally Posted by chevroletman223

Do you happen to have a drag link/tie rod connector for a 71 4wd? If so, whats the price shipped to 13438? towing company bent mine into a V when I bought the truck and had it delivered.

Thanks! -Dan

Hi Dan,

I will take a look tomorrow and let you know. You got to watch some of those towing outfits. I hope they are going to help pay for the damages.

Thank you for the interest,
Thomas

Resto-Rand · 01-29-2015, 01:04 AM

Thanks again Thomas, but I have the old one still and it has a couple of holes for the manifold studs, so I'm sure.

DLTruck1973 · 01-29-2015, 01:49 AM

Quote:

Originally Posted by Resto-Rand

Thanks again Thomas, but I have the old one still and it has a couple of holes for the manifold studs, so I'm sure.

Not a problem. Can you post up a photo of yours? Is it the original to the truck? I am just curious on that. I know there are several different styles of these and looking for accurate information always helps me to help others.

Thanks again,
Thomas

DLTruck1973 · 01-29-2015, 03:47 PM

Quote:

Originally Posted by chevroletman223

Do you happen to have a drag link/tie rod connector for a 71 4wd? If so, whats the price shipped to 13438? towing company bent mine into a V when I bought the truck and had it delivered.

Thanks! -Dan

Hi Dan,

I do have the link you need. It has some nice tie rod ends on it as well. The bar itself has a few teeth marks from a pipe wrench and is not dead eye straight but is very close and looks good overall.

I would need $85.00 for the bar. The tie rods will come with it for that price. Shipping is $36.07 for a total of $121.07

Let me know and thank you for the interest
Thomas

engairuph · 01-29-2015, 07:21 PM

Got the headliner bows, very nice thanks

DLTruck1973 · 01-29-2015, 07:27 PM

Quote:

Originally Posted by engairuph

Got the headliner bows, very nice thanks

Good to hear Ralph, glad you got them and are happy with them,

Thank you for your business,
Thomas

cucvzuz · 01-29-2015, 10:34 PM

Do you still have a good clutch pedal assm. For a 69 if it matters.
Zip 48114

Thanks
Frank

DLTruck1973 · 01-30-2015, 01:12 AM

Quote:

Originally Posted by cucvzuz

Do you still have a good clutch pedal assm. For a 69 if it matters.
Zip 48114

Thanks
Frank

Hi Frank,

Yes we have a few clutch pedal assemblies. I will get you a price shipped tomorrow (Friday). I see you are from Howell. I live in Michigan for 49 years of my life and just recently moved to Oregon. I am very familiar with Howell. How is the snow fall this year there?

Thank you for the interest,
Thomas

chevroletman223 · 01-30-2015, 08:36 AM

Quote:

Originally Posted by DLTruck1973

Hi Dan,

I do have the link you need. It has some nice tie rod ends on it as well. The bar itself has a few teeth marks from a pipe wrench and is not dead eye straight but is very close and looks good overall.

I would need $85.00 for the bar. The tie rods will come with it for that price. Shipping is $36.07 for a total of $121.07

Let me know and thank you for the interest
Thomas

If it is okay with you, I will let you know by the end of the weekend , I am planning on going to the local pick and pull, and I want to check there first to avoid shipping. I appreciate it and will let you know! Thanks

cucvzuz · 01-30-2015, 10:16 AM

Quote:

Originally Posted by DLTruck1973

Hi Frank,

Yes we have a few clutch pedal assemblies. I will get you a price shipped tomorrow (Friday). I see you are from Howell. I live in Michigan for 49 years of my life and just recently moved to Oregon. I am very familiar with Howell. How is the snow fall this year there?

Thank you for the interest,
Thomas

Wow small world! I love howell, close enough but far enough away. Not the snow I was hoping for but better than in years past, there is only about 3in on the ground right now and they say more is coming but you know how that is. It sounds weird but I get a little depressed when there is no snow.

DLTruck1973 · 01-30-2015, 12:15 PM

Quote:

Originally Posted by chevroletman223

If it is okay with you, I will let you know by the end of the weekend , I am planning on going to the local pick and pull, and I want to check there first to avoid shipping. I appreciate it and will let you know! Thanks

Not a problem at all. Just let me know and I will get you taken care of.

Thank you,
Thomas

jaybatta · 01-30-2015, 01:28 PM

Is the clutch pedal still available? Is it in good condition?

Thanks,

DLTruck1973 · 01-30-2015, 02:02 PM

Quote:

Originally Posted by jaybatta

Is the clutch pedal still available? Is it in good condition?

Thanks,

Do you need just the clutch pedal or the complete clutch/brake pedal assembly?

If you get me your zip code, I can quote you a price.

Thank you,
Thomas

jaybatta · 01-30-2015, 02:15 PM

Well I suppose I don't necessarily need the brake pedal. I would however need whatever is necessary to switch from an automatic transmission to a manual. I'm in Stevensville, MT 59870

Thanks

DLTruck1973 · 01-30-2015, 02:30 PM

Quote:

Originally Posted by jaybatta

Well I suppose I don't necessarily need the brake pedal. I would however need whatever is necessary to switch from an automatic transmission to a manual. I'm in Stevensville, MT 59870

Thanks

PM on the way with a quote.

Than you,
Thomas

engairuph · 01-30-2015, 06:57 PM

Need a dash harness for a 69 suburban with gauge and a tach harness also.

DLTruck1973 · 01-30-2015, 07:34 PM

Quote:

Originally Posted by engairuph

Need a dash harness for a 69 suburban with gauge and a tach harness also.

Hi Ralph,

I should have a nice dash harness with gauges for you. Automatic tran, correct?

It is $65.00 plus shipping. I can also get you a tach harness through TBONE1964 (Classic Gauge and Cluster) for $25.00. It is a new tach harness made by TBONE1964. I do not have any used tach harnesses here

Let me kn ow and I will take care of you. I will have to ship Monday, if that is OK.

Thank you again,
Thomas

01-27-2015, 05:01 PM	#151
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,263	Re: 1971 K20 parts F/S Thomas, do you know if Tom is going to LaGrande soon ? I asked him about Eyebrow retaining clips for drivers side GMC fender, I got the trim from Tom but need the clips. You can mail them if not ! Thanks __________________ 71 C-20 07 Magnum RT AWD

01-28-2015, 01:15 AM	#155
Resto-Rand Registered User Join Date: Jul 2012 Location: Bay Area, Ca Posts: 108	Re: 1971 K20 parts F/S Thanks, but I'm looking for the one that has a 45 degree angle toward the back to fit the exhaust. Thanks for checking for me. __________________ 1971 C-10 307 3OTT

01-29-2015, 12:28 AM	#158
chevroletman223 Dan Join Date: Dec 2009 Location: Remsen, NY Posts: 230	Re: 1971 K20 parts F/S Do you happen to have a drag link/tie rod connector for a 71 4wd? If so, whats the price shipped to 13438? towing company bent mine into a V when I bought the truck and had it delivered. Thanks! -Dan __________________ 1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie

01-29-2015, 01:04 AM	#160
Resto-Rand Registered User Join Date: Jul 2012 Location: Bay Area, Ca Posts: 108	Re: 1971 K20 parts F/S Thanks again Thomas, but I have the old one still and it has a couple of holes for the manifold studs, so I'm sure. __________________ 1971 C-10 307 3OTT

01-29-2015, 07:21 PM	#163
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: 1971 K20 parts F/S Got the headliner bows, very nice thanks __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

01-29-2015, 10:34 PM	#165
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1971 K20 parts F/S Do you still have a good clutch pedal assm. For a 69 if it matters. Zip 48114 Thanks Frank

01-30-2015, 01:28 PM	#170
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 836	Re: 1971 K20 parts F/S Is the clutch pedal still available? Is it in good condition? Thanks, __________________ Joe 1968 K20 1970 K20 Semper Fi

01-30-2015, 02:15 PM	#172
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 836	Re: 1971 K20 parts F/S Well I suppose I don't necessarily need the brake pedal. I would however need whatever is necessary to switch from an automatic transmission to a manual. I'm in Stevensville, MT 59870 Thanks __________________ Joe 1968 K20 1970 K20 Semper Fi

01-30-2015, 06:57 PM	#174
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: 1971 K20 parts F/S Need a dash harness for a 69 suburban with gauge and a tach harness also. __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.