Wilwood Front Brakes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bman67 · 01-18-2012, 11:41 PM

I was thinking about buying the Wilwood Front Brake Kit (140-10775-D) for my 67 C10 however it states that you will need to use they CPP drop spindles. Has anyone bought this set-up and tried to install them on the ECE drop spindles? If not, which spindles did you use?

I reached out to ECE however I have not recieved any feedback...

http://www.summitracing.com/parts/WIL-140-10775-D

DaBigKahuna · 01-19-2012, 12:06 AM

Just guessing here but since it shows 2" CPP drop spindles, I'd say that they are the CPP Modular spindles that take adapters for different brakes. The normal CPP spindles are 2.5" drop.

**Tom Vogel** · 01-19-2012, 09:55 AM

I am willing to bet they will drop right on. I beleive the CPP spindles are a knock off of the ECE units. Call ECE dont email them.

big_al_71 · 01-19-2012, 11:41 AM

here is a picture of my front wilwood calipers installed on ECE drop spindles nothing need they bolted right on..

pat 70/71 · 01-19-2012, 07:06 PM

I loaned my truck to Wilwood so they could template for those new brakes front& rear! they had my truck for five days in their clean room. It was cool to see it in the tech room. In the long run I would never do that again. I paid the tow bill to and from Wilwood. and was promised a prototype kit but as we all know eaten bread is soon forgotten. And I got absolutely Zero. Wouldn't purchase their brakes if they were half price. Thanks Steve!! cheers, Pat

01-18-2012, 11:41 PM	#1
bman67 Registered User Join Date: Sep 2010 Location: DFW, TX Posts: 22	Wilwood Front Brakes I was thinking about buying the Wilwood Front Brake Kit (140-10775-D) for my 67 C10 however it states that you will need to use they CPP drop spindles. Has anyone bought this set-up and tried to install them on the ECE drop spindles? If not, which spindles did you use? I reached out to ECE however I have not recieved any feedback... http://www.summitracing.com/parts/WIL-140-10775-D

01-19-2012, 12:06 AM	#2
DaBigKahuna Registered User Join Date: Mar 2011 Location: Disneyland, CA Posts: 486	Re: Wilwood Front Brakes Just guessing here but since it shows 2" CPP drop spindles, I'd say that they are the CPP Modular spindles that take adapters for different brakes. The normal CPP spindles are 2.5" drop.

01-19-2012, 09:55 AM	#3
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: Wilwood Front Brakes I am willing to bet they will drop right on. I beleive the CPP spindles are a knock off of the ECE units. Call ECE dont email them.

01-19-2012, 11:41 AM	#4
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Wilwood Front Brakes here is a picture of my front wilwood calipers installed on ECE drop spindles nothing need they bolted right on.. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

01-19-2012, 07:06 PM	#5
pat 70/71 Registered User Join Date: Nov 2009 Location: newbury park california Posts: 1,038	Re: Wilwood Front Brakes I loaned my truck to Wilwood so they could template for those new brakes front& rear! they had my truck for five days in their clean room. It was cool to see it in the tech room. In the long run I would never do that again. I paid the tow bill to and from Wilwood. and was promised a prototype kit but as we all know eaten bread is soon forgotten. And I got absolutely Zero. Wouldn't purchase their brakes if they were half price. Thanks Steve!! cheers, Pat



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.