|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-01-2017, 02:02 AM
|
#1 |
|
70+ ( Old Skool Club )
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,068
|
Bulb Change on HVAC Control
I need to change the bulb on my HVAC control in my truck that has factory A/C. The bulb beside the fan switch is a real bear to get at so my question is, if I remove the two screws that hold the HVAC Control in place can I pull it forward enough so I can get at the bulb. There must be someone on here that has ran into this bulb change .
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021 |
|
|
|
04-01-2017, 07:37 AM
|
#2 |
|
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,451
|
Re: Bulb Change on HVAC Control
It's been a long time for me since I pulled one, but I believe it will only come out from the bottom, not threw the opening. You should be able to grab the two bulbs from either side of the assembly, they are a pull socket.
|
|
|
|
|
04-01-2017, 10:09 AM
|
#3 |
|
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,445
|
Re: Bulb Change on HVAC Control
It gave me enough room to pull the unit out from under and work on the fan switch and bulb . So yes pull the 2 screws and push the unit in and down to gain access
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
|
|
|
|
04-01-2017, 10:44 AM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Bulb Change on HVAC Control
I've never had a problem with them. They are angled in so they are not bad at all to me to get out are in without pulling it.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
04-01-2017, 11:53 AM
|
#5 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,396
|
Re: Bulb Change on HVAC Control
Ditto, I've never had to pull the unit out to change bulb
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
