Neutral Safety Switch/Backup Lights - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bonestock3ott · 11-17-2018, 04:43 PM

You need to run 12 volt fused power into one terminal and then attach the wire you ran to the reverse lights to the other terminal. The switch is just a simple single pole switch . If the lights are on all the time the switch will need to be adjusted or possibly the wires will need to be reversed on the switch. Hope that helps

**ezrider01** · 11-18-2018, 12:53 AM

Absolutely does...duhhh...

..I totally forgot about the 12v source. Thanks for the help!!!

11-17-2018, 04:43 PM	#26
Bonestock3ott Registered User Join Date: Nov 2017 Location: BYRON, NY Posts: 60	Re: Neutral Safety Switch/Backup Lights You need to run 12 volt fused power into one terminal and then attach the wire you ran to the reverse lights to the other terminal. The switch is just a simple single pole switch . If the lights are on all the time the switch will need to be adjusted or possibly the wires will need to be reversed on the switch. Hope that helps

11-18-2018, 12:53 AM	#27
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: Neutral Safety Switch/Backup Lights Absolutely does...duhhh.....I totally forgot about the 12v source. Thanks for the help!!! __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.