![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2008
Location: Calgary AB
Posts: 8
|
lifted 2007 classic 4x4 2500 HD
I just looked at a used truck I'm thinking about buying. The truck has a lift but as far as I can tell the front was just jacked by way of the torsion bar adjustment and the rear has about a 2" block with longer u bolts. The steering seamed a little loose compared to my 2000 3/4 ton which is bone stock as far as ride. What are the usual things to watch out for with this method of lift?
|
![]() |
![]() |
![]() |
#2 |
Canadian Trucker
Join Date: Nov 2010
Location: Sarnia, ont canada
Posts: 648
|
Re: lifted 2007 classic 4x4 2500 HD
Check all suspension and steering components. Cranking the torsion bars is a cheap and easy way to lift those trucks, but cranking adds torsion and stress to all the suspension and steering parts. Also make sure it was aligned after they were cranked.
__________________
![]() 2020 Silverado Trail Boss - 6.2/10spd |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2008
Location: Calgary AB
Posts: 8
|
Re: lifted 2007 classic 4x4 2500 HD
decided not to buy the truck...thanks for the reply
|
![]() |
![]() |
![]() |
Bookmarks |
|
|