|
06-06-2003, 11:25 AM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: south-east kansas
Posts: 68
|
lug nuts ??
This was answerd on a previous post but I was unable to go far enough to get to the answer.
who is it that has the conversion lug nuts to put the modern center caps on older trucks? Also, is the bolt pattern on Asto vans the 5" like ours? Thanks in advance
__________________
72-C-10-LWB-Big Block-TH400- PosiTrac Leaf Springs- A Dark Green Ford Eaten Machine. And those are not rust holes, there cooling vents.. |
|
|
|
06-06-2003, 12:24 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Astro is 5 on 5...but I don't know about the lug nut conversion though.
|
|
|
|
|
06-06-2003, 02:06 PM
|
#3 |
|
Registered User
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
|
__________________
69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas |
|
|
|
|
06-06-2003, 03:06 PM
|
#4 |
|
Registered User
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
|
Unless the thread got wiped out, we've decided before that you have to change to the new metric studs to accept the newer lug nuts with the external threads to hold the plastic nuts that hold the plastic center caps.
__________________
Silence is golden, duct tape is silver. - Scott |
|
|
|
|
06-06-2003, 03:11 PM
|
#5 |
|
Registered User
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
|
info from the EBAY link above
This is a set of 20, NEW, Chevy or GMC conversion lug nuts that converts 14mm to 1/2". This will allow the 5 lug, 1990-99 Chevy or GMC Truck OEM factory wheels to be installed on a 1973-87 Chevy or GMC truck. I have pictured the black plastic caps and one center cap, however they are not on auction, only the lug nuts. I showed the center cap and black plastic caps so you could be sure you were buying the correct lug nuts. There are threads inside and outside of the lug nut. The black cap from the 14mm lug nuts will thread on the top of these lug nuts. The inside is 1/2" as is the older Chevy and GMC trucks. Lug nuts are very technical, however if you have any questions simply E-mail me. E-bay is my retirement hobby and I can answer most lug nut questions. I accept paypal, money orders, cashiers check, visa and mastercard. Freight is $8.00 and Okla. residents pay 8.375% sales tax. The freight I listed is for the US. I will ship outside of the US, however E-mail for the freight charges BEFORE bidding, as lug nuts are very heavy. THANKS FOR LOOKING!!!!!!!
__________________
69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas |
|
|
|
|
06-06-2003, 07:46 PM
|
#6 |
|
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
|
the astro van lug nuts and wheel and caps DO work no need to change studs they work just fine. i have them on my truck the chrome 5 stars from an astro i used the astro lugs and center caps
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
|
|
|
|
06-06-2003, 09:18 PM
|
#7 |
|
Registered User
Join Date: Dec 2002
Location: south-east kansas
Posts: 68
|
Thanks guys, I found out today at the tire shop that the Astro's are 5 on 5 and haven't been metric'ized. Now, if they will be deep enough to cover the front spindle?
__________________
72-C-10-LWB-Big Block-TH400- PosiTrac Leaf Springs- A Dark Green Ford Eaten Machine. And those are not rust holes, there cooling vents.. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
