The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-05-2017, 10:59 PM   #11
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: Another NV4500 to NP205

advance adapter bell is worth it. I have it with hydraulic clutch in my 85 blazer. if you redrill the case you could end up like a guy on ck5 and the loctited torqued bolts could back out and cause catastrophic failure. unikely but would ruin it and turn it in to a terrible situation just to save a couple bucks.

I have the 32 spline flat flange with a ford superduty front driveshaft. It is 1350 spicer ujoints and a 4.25 bolt circle with the 2" pilot. fits almost any new flange out there nowadays and is very easy to find. Do some research on em but a new one can be had here locally for 400 built to your measurement. There are two different types. the rounded cv yoke ears is the ideal one.

sunsoaked, stock front yoke on the d60 is 1310 which is generally more than sufficient for most folks. but there aint no kill like overkill.
__________________
1985 k5 396/nv4500/203/205 d60/d70 4.56 42 sx2
1991 V3500 350/4l80/205 60/14 4.10 35 toyos.
obijuan is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com