The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-19-2013, 10:14 PM   #1
Franks69
Registered User
 
Join Date: Jan 2012
Location: Palm Coast, Florida
Posts: 23
Windshield Install ?

OK, here is the story. I called Advanced Auto Glass to put a windshield in my 1969 c10.They tell me for $205.00 they would install the front windshield. I tell them I need the front windshield and back glass put in with the gasket and trim. They said for $423.00 they would do both and they had every thing gaskets, trim and glass. I was told that they would be at my house on Monday between 10:00 and 2:00 to install it. Monday at 1:50 I call them to see were they are at and twenty minutes later the installer shows up.
The installer gets his glass out and I ask does he have evrything. He says yep windsheild and gasket. I ask about the trim and he said they don't carry that. He didn't have the back glass or gasket either. He said he could get the gasket for the trim but he cant get the trim. He said the gasket, trim and glass all had to be installed at the same time. With that piece of info, I told him I would wait until I got the trim.
My question is, does it all have to be installed at the same time? Should I get another installer? Or should I get a set of aviator glases and go without the windshield?
Franks69 is offline   Reply With Quote
Old 02-19-2013, 10:17 PM   #2
turp mcspray
Registered User
 
turp mcspray's Avatar
 
Join Date: May 2007
Location: Rapid City South Dakota
Posts: 2,359
Re: Windshield Install ?

Trim goes into the rubber, before you can install the glass.
__________________
Turp Mcspray
New life for an old 2wd, farm blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=505987
My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299
turp mcspray is offline   Reply With Quote
Old 02-19-2013, 10:43 PM   #3
Franks69
Registered User
 
Join Date: Jan 2012
Location: Palm Coast, Florida
Posts: 23
Re: Windshield Install ?

Thanks turp.The installer seamed on top of it,but after the run-a-round with the phone calls,I figured a second opion wouldn't hurt nothing. I appreciate it......THANK YOU.
Franks69 is offline   Reply With Quote
Old 02-20-2013, 06:47 AM   #4
JimKshortstep4x4
Senior Member
 
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
Re: Windshield Install ?

You may want to make sure that they have the right seal for the trim as there are two different sizes on the part that fits into the seal.

Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end
1965 Impala SS 400 sbc, Muncie rock crusher
1966 Impala SS 396 bbc, TH 400
1969 El Camino, 350 sbc, TH 350
1971 Snowplow built on a Blazer frame
1972 GMC Short bed, stepside, TH 400, 427 BBC
JimKshortstep4x4 is offline   Reply With Quote
Old 02-21-2013, 06:36 PM   #5
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,285
Re: Windshield Install ?

Try this thread before doing anything: http://67-72chevytrucks.com/vboard/s...d.php?t=484773
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 02-21-2013, 09:09 PM   #6
Franks69
Registered User
 
Join Date: Jan 2012
Location: Palm Coast, Florida
Posts: 23
Re: Windshield Install ?

Thats alot of good information. I'm giong to try to find the oem gasket. I hope I didn't toss it in the trash. I have the oem trim but its dinged up a bit. I don't know if it can be straighten out.
THANKS DeadheadNM
Franks69 is offline   Reply With Quote
Old 02-21-2013, 09:28 PM   #7
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,285
Re: Windshield Install ?

Quote:
Originally Posted by Franks69 View Post
Thats alot of good information. I'm giong to try to find the oem gasket. I hope I didn't toss it in the trash. I have the oem trim but its dinged up a bit. I don't know if it can be straighten out.
THANKS DeadheadNM
You bet and good luck. The OEM trim isn't too hard to scare up on the parts board if you need a new set.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com