The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-19-2008, 07:13 PM   #1
ostncoln
Registered User
 
ostncoln's Avatar
 
Join Date: Sep 2006
Location: Amarillo, TX
Posts: 178
neighbor wants a lift

like it says, he has a 95 chevy shortbed reg cab 4x4 that he as a skyjacker
6" lift for. he is wanting me to install if for him b/c the local shop wants too much. so what should i charge him for doing it? he is in no hurry and says i can taka as long as i want.
__________________
1971 C-10 Project
350/400
5/7 drop
My Slow Build Thread
ostncoln is offline   Reply With Quote
Old 07-19-2008, 09:10 PM   #2
Smallz72project
Registered User
 
Smallz72project's Avatar
 
Join Date: May 2005
Location: Missoula, MT
Posts: 273
Re: neighbor wants a lift

Hows it goin. First ? is....what kind of lift is it? Does it drop the control arm or install a larger knuckle. Quite a bit more work involved with a control arm drop. What is the shop asking to complete the work? I work for Les Schwab in the alignment center and have done countless lifts. For a job like that...we only charge $200 in labor...but they are also purchasing the lift from us, and we have a lift and all the tools. But I would definetely say nothing less then at least 300 for at the home lift of a ifs. .they can be a booger at times. Keep on truckin!
__________________
- 1967 Chevy C10 shortbox
- 1984 Chevy K10 "Mater"- SWB 305 manual, retired sheriffs truck, Current Frame Off Project
- 1986 Chevy K10 LWB 350/350 Daily Driver/project
Smallz72project is offline   Reply With Quote
Old 07-20-2008, 05:50 PM   #3
ostncoln
Registered User
 
ostncoln's Avatar
 
Join Date: Sep 2006
Location: Amarillo, TX
Posts: 178
Re: neighbor wants a lift

i dont think its just a knuckle lift. i lloked over the directions briefly and the back is simple but on the ifs you have to change the crossmember under the engine drop down the tb crossmember yada yada yada
he siad the local shop he talked to wanted $2500 to put it on
__________________
1971 C-10 Project
350/400
5/7 drop
My Slow Build Thread
ostncoln is offline   Reply With Quote
Old 07-21-2008, 10:11 AM   #4
Smallz72project
Registered User
 
Smallz72project's Avatar
 
Join Date: May 2005
Location: Missoula, MT
Posts: 273
Re: neighbor wants a lift

Right...all of the IFS lifts have different cross braces that bolt in where the lower control arm goes and then the control arm bolts to the new cross brace. But on some...you have to lower the mounting point of the upper control arm as well ( control arm drop ) and some you dont they just give you a larger knuckle to span the new distance. More then likely there will be some cutting and drilling involved and it is more then recommented to have someone do it with you...buddy system. If they were wanting 2500 just to install it...thats just outrageous. I would say you could be safe charging anywhere between the 300 up to 600. When ever I have a side job like this...I kind of think about what I make at my job....take my wage and adjust accordingly if it was more of a pain or less. But I would say $60 an hour for 10 hours or so... $600. Or you could go the safe route...since you dont know how much of a pain it could or couldnt be and might feel ripped off afterwords...just tell him that you would have to install and think about it but you wouldnt charge anymore then $1000.....that way you have a cushion. Keep on truckin
__________________
- 1967 Chevy C10 shortbox
- 1984 Chevy K10 "Mater"- SWB 305 manual, retired sheriffs truck, Current Frame Off Project
- 1986 Chevy K10 LWB 350/350 Daily Driver/project
Smallz72project is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com