KS 13/16'' 3/4T Lug Wrench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 11-04-2018, 06:30 PM

Pulled this from the '70 3/4 ton CustomCamper/20 I have been parting. Not sure if it is correct and original to the truck but it does fit snug to the lug nuts on the 8 lug wheels. As mentioned, has a 13/16'' lug nut fitting, 22'' straight shaft and 4 1/4'' on the short section. Marked "USA" at the lug nut fitting also with an "E" letter in the side. Not sure original application but works great on the wheels. $15 plus shipping, money order, do not have Paypal.

**gmc 2500 4x4** · 11-05-2018, 08:40 AM

i'll take it

**Ironhorse** · 11-05-2018, 09:24 AM

Quote:

Originally Posted by gmc 2500 4x4

i'll take it

LUG WRENCH SOLD to gmc 2500 4x4. Paul, thanks for the purchase. Have your address from the power drum booster brackets, will figure shipping on the lug wrench and will PM with total later today.

**Ironhorse** · 11-14-2018, 12:51 PM

Payment received and lug wrench shipped. PM sent with tracking #s. Thanks for the purchase.

**jocko** · 11-14-2018, 08:56 PM

Ugh! How on earth did I miss this.. Ha. I've had a wtb ad floatin around out there for like 10 years (ok, more like 6 months... but still).

Good buy!

**Ironhorse** · 11-14-2018, 08:58 PM

Jocko, not sure but will look, I "may" have another in the parts stash. Will check tomorrow and get back with you.

**Ironhorse** · 11-15-2018, 04:37 PM

Jocko, I do have another 13/16'' lug wrench but not quite like this one. It is a bit shorter at 9'' at the long end and 3'' at the short angled end. It is a 13/16'' and has a beveled pry edge at the tip. Might work well in a tool box along with a length of pipe for better storage fit. $10 plus shipping, let me know if interested.

**jocko** · 11-15-2018, 10:17 PM

Thanks for posting that - any idea how long the original was? The first one seems too long and this one seems too short and I feel like goldilocks....

**Ironhorse** · 11-15-2018, 10:31 PM

Honestly don't have a clue if there is such a thing as an "original length" lug wrench. Maybe someone who has a GM parts book can chime in about such. Have seen so many different one used on trucks over the years, think lot of guys just use what they can find and will work. Not much help there I know, still leaves the Goldilocks feelings, LOL.

**jocko** · 11-15-2018, 11:38 PM

Ha, no worries. I'll take it! The first time I use it will probably be on the side of the road and I'll discover there's just not enough leverage there. So, I should start eating more pizza right now

I'll pm you my address and then just let me know the total and how you'd like to be paid! Thanks again!

**jocko** · 11-16-2018, 09:07 PM

payment sent, thank you!

11-04-2018, 06:30 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,004	13/16'' 3/4T Lug Wrench Pulled this from the '70 3/4 ton CustomCamper/20 I have been parting. Not sure if it is correct and original to the truck but it does fit snug to the lug nuts on the 8 lug wheels. As mentioned, has a 13/16'' lug nut fitting, 22'' straight shaft and 4 1/4'' on the short section. Marked "USA" at the lug nut fitting also with an "E" letter in the side. Not sure original application but works great on the wheels. $15 plus shipping, money order, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-05-2018, 08:40 AM	#2
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,885	Re: 13/16'' 3/4T Lug Wrench i'll take it

11-14-2018, 12:51 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,004	Re: 13/16'' 3/4T Lug Wrench Payment received and lug wrench shipped. PM sent with tracking #s. Thanks for the purchase. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-14-2018, 08:56 PM	#5
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,930	Re: 13/16'' 3/4T Lug Wrench Ugh! How on earth did I miss this.. Ha. I've had a wtb ad floatin around out there for like 10 years (ok, more like 6 months... but still). Good buy!

11-14-2018, 08:58 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,004	Re: 13/16'' 3/4T Lug Wrench Jocko, not sure but will look, I "may" have another in the parts stash. Will check tomorrow and get back with you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-15-2018, 04:37 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,004	Re: 13/16'' 3/4T Lug Wrench Jocko, I do have another 13/16'' lug wrench but not quite like this one. It is a bit shorter at 9'' at the long end and 3'' at the short angled end. It is a 13/16'' and has a beveled pry edge at the tip. Might work well in a tool box along with a length of pipe for better storage fit. $10 plus shipping, let me know if interested. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-15-2018, 10:17 PM	#8
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,930	Re: 13/16'' 3/4T Lug Wrench Thanks for posting that - any idea how long the original was? The first one seems too long and this one seems too short and I feel like goldilocks....

11-15-2018, 10:31 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,004	Re: 13/16'' 3/4T Lug Wrench Honestly don't have a clue if there is such a thing as an "original length" lug wrench. Maybe someone who has a GM parts book can chime in about such. Have seen so many different one used on trucks over the years, think lot of guys just use what they can find and will work. Not much help there I know, still leaves the Goldilocks feelings, LOL. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-15-2018, 11:38 PM	#10
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,930	Re: 13/16'' 3/4T Lug Wrench Ha, no worries. I'll take it! The first time I use it will probably be on the side of the road and I'll discover there's just not enough leverage there. So, I should start eating more pizza right now I'll pm you my address and then just let me know the total and how you'd like to be paid! Thanks again!

11-16-2018, 09:07 PM	#11
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,930	Re: 13/16'' 3/4T Lug Wrench payment sent, thank you!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.