292 L-6 Performance parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

David67 · 06-02-2010, 05:01 PM

Does anyone know any good places where I can get good performance parts for a 292 Inline 6?

292farmer · 06-02-2010, 05:59 PM

i'd start here, ive got the clifford headers on my 292
http://cliffordperformance.net/
http://www.inliners.org/
http://stoveboltengineco.com/
summit has some pistons and cams and comp cams has some cams too they may be 230/250 cams though they will work except for the fuel pump lobe wont line up, u will have to convert to electric pump i believe.

onetonwrecker · 03-08-2012, 10:01 PM

looking for some advice im building a 68 chevy c30 started as a camper but nows going to be a wrecker it has a 292 that i want to livin up some where do i start?

PanelDeland · 03-08-2012, 10:48 PM

One ton,Depends on how far into the engine you're going.Intake,exhuast and HEI would be the first things.A book by Santucci will give you all the 6cyl speed arts you would want.Be prepared,6 cyl stuff is about 3-5 times as high priced as small block stuff.

54blackhornet · 03-09-2012, 01:48 PM

Go to www.inliners.com, also google Langdons stovebolt he is the 292 guru ! 6cyl stuff is not that expensive at all you just need to look for it ! every time i open my hood i get a bunch of comments like WOW it's not a F@#king 350 I just smile, Remember if it was not for the Stovebolt 6 Chevrolet would not be around today ! long live the GM 6 cyl engines...

longbed67 · 03-09-2012, 02:54 PM

Tom at www.12bolt.com has a ton of stuff for the 292's he even has two different custom grinds from comp cams. Great gut to work with, competitive prices as well. I got a lot of my L6 stuff from him.

hugger6933 · 03-09-2012, 06:26 PM

I got one of those inliners in my 64 C60 dumptruck. I was looking around on the web the other day and saw some stuff to make your 292 TBI injected. Add a turbo and a tbi with a cam and you would be suprised!!

onetonwrecker · 03-09-2012, 10:20 PM

thanks guys been doing some diggin seems from what ive read the stock cam is best for me and im not sure if i wanna go with a single 4 bbl or 2 singles or 3 singles got to do more reading but headers are a must for what i can tell

carretera · 03-09-2012, 11:31 PM

I'm looking for a water pump two groove pulley for a 292, any help appreciated, thanks.
Here's a couple of pictures of my 292, it went in a car not a truck, but it's still a truck engine.

54blackhornet · 03-10-2012, 01:12 PM

Hey did you copy me ? I painted my 292 black also ! What is it going in ?

carretera · 03-10-2012, 02:51 PM

Hi, I thought I had located the wp pulley! It's the front end of a 1955 Chevy 150 4dr.
There's a 292 in YouTube painted black that looks great, glad you have good taste, take care, Tony.

longbed67 · 03-10-2012, 04:23 PM

This is my 250 but it would still look sweet with a setup like this on your 292

1972RedNeck · 03-11-2012, 08:12 PM

Bump

63GMC4 me · 01-08-2018, 03:29 PM

here is mine Name: 016.jpg
Views: 4524
Size: 111.1 KB

IRQVET · 01-08-2018, 11:49 PM

Love this thread already . . .

RichardJ · 01-09-2018, 12:04 AM

8 year old thread!

muley · 01-09-2018, 09:18 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=276823

Hope this copy/paste stuff works.
There is a ton of stuff on this thread.

06-02-2010, 05:01 PM	#1
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	292 Performance parts Does anyone know any good places where I can get good performance parts for a 292 Inline 6? Last edited by David67; 06-02-2010 at 05:27 PM.

06-02-2010, 05:59 PM	#2
292farmer Registered User Join Date: Nov 2009 Location: stoddard nh Posts: 693	Re: 292 L-6 Performance parts i'd start here, ive got the clifford headers on my 292 http://cliffordperformance.net/ http://www.inliners.org/ http://stoveboltengineco.com/ summit has some pistons and cams and comp cams has some cams too they may be 230/250 cams though they will work except for the fuel pump lobe wont line up, u will have to convert to electric pump i believe.

03-08-2012, 10:01 PM	#3
onetonwrecker Registered User Join Date: Jan 2012 Location: Michigan Posts: 26	Re: 292 L-6 Performance parts looking for some advice im building a 68 chevy c30 started as a camper but nows going to be a wrecker it has a 292 that i want to livin up some where do i start?

03-08-2012, 10:48 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 292 L-6 Performance parts One ton,Depends on how far into the engine you're going.Intake,exhuast and HEI would be the first things.A book by Santucci will give you all the 6cyl speed arts you would want.Be prepared,6 cyl stuff is about 3-5 times as high priced as small block stuff. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-09-2012, 01:48 PM	#5
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,248	Re: 292 L-6 Performance parts Go to www.inliners.com, also google Langdons stovebolt he is the 292 guru ! 6cyl stuff is not that expensive at all you just need to look for it ! every time i open my hood i get a bunch of comments like WOW it's not a F@#king 350 I just smile, Remember if it was not for the Stovebolt 6 Chevrolet would not be around today ! long live the GM 6 cyl engines...

03-09-2012, 02:54 PM	#6
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 292 L-6 Performance parts Tom at www.12bolt.com has a ton of stuff for the 292's he even has two different custom grinds from comp cams. Great gut to work with, competitive prices as well. I got a lot of my L6 stuff from him. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-09-2012, 06:26 PM	#7
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,257	Re: 292 L-6 Performance parts I got one of those inliners in my 64 C60 dumptruck. I was looking around on the web the other day and saw some stuff to make your 292 TBI injected. Add a turbo and a tbi with a cam and you would be suprised!!

03-09-2012, 10:20 PM	#8
onetonwrecker Registered User Join Date: Jan 2012 Location: Michigan Posts: 26	Re: 292 L-6 Performance parts thanks guys been doing some diggin seems from what ive read the stock cam is best for me and im not sure if i wanna go with a single 4 bbl or 2 singles or 3 singles got to do more reading but headers are a must for what i can tell

03-09-2012, 11:31 PM	#9
carretera Registered User Join Date: Mar 2012 Location: Hialeah Posts: 6	Re: 292 L-6 Performance parts I'm looking for a water pump two groove pulley for a 292, any help appreciated, thanks. Here's a couple of pictures of my 292, it went in a car not a truck, but it's still a truck engine. Attached Images

03-10-2012, 01:12 PM	#10
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,248	Re: 292 L-6 Performance parts Hey did you copy me ? I painted my 292 black also ! What is it going in ?

03-10-2012, 02:51 PM	#11
carretera Registered User Join Date: Mar 2012 Location: Hialeah Posts: 6	Re: 292 L-6 Performance parts Hi, I thought I had located the wp pulley! It's the front end of a 1955 Chevy 150 4dr. There's a 292 in YouTube painted black that looks great, glad you have good taste, take care, Tony.

03-10-2012, 04:23 PM	#12
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 292 L-6 Performance parts This is my 250 but it would still look sweet with a setup like this on your 292 Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

01-08-2018, 03:29 PM	#14
63GMC4 me Registered User Join Date: Nov 2016 Location: B.C Canada Posts: 37	Re: 292 L-6 Performance parts here is mine

01-08-2018, 11:49 PM	#15
IRQVET Registered User Join Date: Aug 2017 Location: Tallahassee, FL. Posts: 125	Re: 292 L-6 Performance parts Love this thread already . . . __________________ 1998 Chevy Tahoe 2D 1949 Willys CJ2A 1967 C-20 Flatbed (Sold)

01-09-2018, 12:04 AM	#16
RichardJ Registered User Join Date: Apr 2010 Location: So Cal Posts: 1,409	Re: 292 L-6 Performance parts 8 year old thread! __________________ '67 GMC 2500, 292, 4spd, AC



Register or Log In To remove these advertisements.

01-09-2018, 09:18 AM	#17
muley Registered User Join Date: Aug 2013 Location: Homedale, Idaho Posts: 160	Re: 292 L-6 Performance parts http://67-72chevytrucks.com/vboard/s...d.php?t=276823 Hope this copy/paste stuff works. There is a ton of stuff on this thread. __________________ Grandpa 1953 M38A1 Jeep 1989 GMC K2500 1958 Alaskan Camper all original WORK : A necessary evil that finances what I really like to do.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.