The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-18-2018, 09:54 PM   #1
dcmulisha
Registered User
 
dcmulisha's Avatar
 
Join Date: Sep 2010
Location: Dallas,Ga
Posts: 16
59 GMC 100 with 79 Camaro subframe help

I'm looking for a tilt steering column that will fit my 59 GMC with 79 camaro subframe. I don't want to use a new after market. I enjoy to old school junk yard pull.
dcmulisha is offline   Reply With Quote
Old 02-18-2018, 10:32 PM   #2
Softpatch
Registered User
 
Softpatch's Avatar
 
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
Re: 59 GMC 100 with 79 Camaro subframe help

any full size like Impala will do ya
even if you can get a "Unicorn" 73-79 chevy van
I have been known to use a 73-81 Truck
I used a 78-81 Tilt out of a Cutlass The wiring clip is a bit diffrent
but i worked around it
.
.
........Sp
.
__________________
My Spelling is Not Incorrect...It's 'Creative'
.
.
1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E
http://67-72chevytrucks.com/vboard/s...d.php?t=789617
59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341
Softpatch is offline   Reply With Quote
Old 02-18-2018, 10:42 PM   #3
Softpatch
Registered User
 
Softpatch's Avatar
 
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
Re: 59 GMC 100 with 79 Camaro subframe help

theres no drop "Plug - n - play tilt
all needs fab.
also used a Tilt - Telly out of a 1966 Toranado..
that was very cool
Stwist the ring Pull up
.

__________________
My Spelling is Not Incorrect...It's 'Creative'
.
.
1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E
http://67-72chevytrucks.com/vboard/s...d.php?t=789617
59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341
Softpatch is offline   Reply With Quote
Old 02-18-2018, 10:46 PM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: 59 GMC 100 with 79 Camaro subframe help

The vans he mentioned don't have a key in the column but are column shift. Pretty clean column if you can find one.

If you are running a floor shift and want a tilt the tilt column out of a mid 70's 4 speed truck is rather easy to find an again cleaner than most. It still has the ugly switch but doesn't have all the dimmer switch junk hanging on the other side cluttering it up.

Some Mopars from the early 70's might not be a bad choice as they usually are a Saginaw column but may need a different horn kit.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 02-18-2018, 10:48 PM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: 59 GMC 100 with 79 Camaro subframe help

Have to agree with Softpatch there. There is no true plug and play column unless you just flat luck out. Most will need a bit of tweaking one way or another.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 02-18-2018, 11:33 PM   #6
dcmulisha
Registered User
 
dcmulisha's Avatar
 
Join Date: Sep 2010
Location: Dallas,Ga
Posts: 16
Re: 59 GMC 100 with 79 Camaro subframe help

Fab is not an issue. Just curious as to what is the best to start from. It's already a floor shift, so I'm looking for something clean with tilt.
dcmulisha is offline   Reply With Quote
Old 02-18-2018, 11:49 PM   #7
svr
Registered User
 
svr's Avatar
 
Join Date: Feb 2016
Location: Othello washington
Posts: 400
Re: 59 GMC 100 with 79 Camaro subframe help

I used a mid 70's chev pickup floor shift tilt column, i shaved the ignition switch and gutted the wheel lock, its a little long but its going to work on mine.
__________________
57 short box, 235, T5, C4
http://67-72chevytrucks.com/vboard/s...d.php?t=739132
svr is offline   Reply With Quote
Old 02-19-2018, 11:06 AM   #8
popstand
Registered User
 
Join Date: Oct 2010
Location: southeast michigan
Posts: 57
Re: 59 GMC 100 with 79 Camaro subframe help

built my 53 with 79 Nova sub frame, late 60's van column
had to shorten the steering shaft a little, kept the rag joint
the van column is smaller than most of the gm, looks better
popstand is offline   Reply With Quote
Old 02-19-2018, 03:18 PM   #9
bowt1ed
Registered User
 
Join Date: Apr 2011
Location: Virginia Beach, VA
Posts: 494
Re: 59 GMC 100 with 79 Camaro subframe help

Before this current build (now Ididit) I had a 1980 Camaro column in mine. In fact, I think I had more Camaro parts than original 57 parts (subframe, column, master/booster, gas pedal, engine/trans, rear end...). Bolt up easy - worked and fit fine.

Cheers, Jim
bowt1ed is offline   Reply With Quote
Old 02-22-2018, 12:47 AM   #10
tmoble
Registered User
 
Join Date: Feb 2009
Location: Glendale, Az
Posts: 1,062
Re: 59 GMC 100 with 79 Camaro subframe help

Quote:
Originally Posted by bowt1ed View Post
Before this current build (now Ididit) I had a 1980 Camaro column in mine. In fact, I think I had more Camaro parts than original 57 parts (subframe, column, master/booster, gas pedal, engine/trans, rear end...). Bolt up easy - worked and fit fine.

Cheers, Jim
Bet it drove good. Mine does, even better with the C4 Vette rear. Like a rocket on curved freeway on ramps.

Tom
tmoble is offline   Reply With Quote
Old 02-22-2018, 12:50 AM   #11
tmoble
Registered User
 
Join Date: Feb 2009
Location: Glendale, Az
Posts: 1,062
Re: 59 GMC 100 with 79 Camaro subframe help

Softpatch, I used the intermediate steering shaft from a Toronado like that when I swapped mine of to a 77 Camaro front stub. Needed no modification, just fit.
tmoble is offline   Reply With Quote
Old 03-08-2018, 08:23 AM   #12
dcmulisha
Registered User
 
dcmulisha's Avatar
 
Join Date: Sep 2010
Location: Dallas,Ga
Posts: 16
Re: 59 GMC 100 with 79 Camaro subframe help

Well the search has not gone well. Thanks for all the info, unfortunately I've not been able to track a decent one down. That said, I'm shifting strategy and going aftermarket. Now I have a new question...

What would be the ideal length and diameter for said aftermarket column? I figure since I'm going to be able to get basically what ever size I want, I might as well get the one that will fit the best and require the least amount of "engineering". I do understand that all will require some work (and a few beers) however.

I'm currently looking at 30" and 33" universal tilt columns.

Keep in mind this is a 1959 GMC 100 married to a 1979 Camaro subframe and steering box.

Thanks

Last edited by dcmulisha; 03-08-2018 at 03:03 PM.
dcmulisha is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com