68 project - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GR8-68** · 01-05-2017, 12:29 PM

Quote:

Originally Posted by cknfrmr

be careful. cheater slicks and rain don't go together very well. might want to hydro plain on ya.

I have a 2013 Ram to drive in that stuff

cknfrmr · 01-05-2017, 12:43 PM

I don't have good luck. I would get caught in a monsoon and have to sit it out for 3 days. LOL

slowcpe · 01-05-2017, 12:54 PM

Nice work! I got caught one time in the rain in my Mustang on ET Streets. It was not a fun experience, especially on 465 in Indy during rush hour.

**GR8-68** · 01-05-2017, 03:10 PM

Thanks, yes I will be very careful if I get caught in the rain, been there done that myself

C1ph3r · 01-06-2017, 02:41 PM

Quote:

Originally Posted by GR8-68

Absolutely !! May plan something for early April at the truck shop

Sorry to jump in on this. Just heard about a potential get together in the NC thread. Are you referring to the Truck Shop in Concord? That place is about 10 minutes from my house. That would be sweet.

**GR8-68** · 01-06-2017, 05:25 PM

Quote:

Originally Posted by C1ph3r

Sorry to jump in on this. Just heard about a potential get together in the NC thread. Are you referring to the Truck Shop in Concord? That place is about 10 minutes from my house. That would be sweet.

Actually no, we were talking about the truck shop where I work on my truck at in Kernersville NC

C1ph3r · 01-06-2017, 05:27 PM

Quote:

Originally Posted by GR8-68

Actually no, we were talking about the truck shop where I work on my truck at in Kernersville NC

Ohhhhh. Ok. Well that is just a tad bit further away.

**GR8-68** · 01-08-2017, 07:42 PM

Well, I wasn't able to get anything done on ole 68 this weekend due to circumstance but the front tires have come in and the rear tires should be here on Tuesday, this project will continue when hardships in life right now have settled.

cknfrmr · 01-08-2017, 07:57 PM

hope your talking about weather related stuff and everything is ok man.

**GR8-68** · 01-14-2017, 09:21 AM

Well, not much has happened in the last couple weeks that thing called life happened. Hopefully soon I can get back at it and get this project back under way. The tires have come in so I can get those mounted and ready to install once I finish getting the suspension bolted up. Just really takes some time to prep all the small parts and paint them up before install but it will be good when it is rolling.

**GR8-68** · 01-14-2017, 03:51 PM

Got some primer on the driver side..

**zicc1835** · 01-14-2017, 03:52 PM

lookin good

**GR8-68** · 01-14-2017, 03:54 PM

And I also have the a arms and springs in, time to pick up some wheel bearings and seals

**GR8-68** · 01-14-2017, 05:31 PM

**GR8-68** · 01-14-2017, 05:51 PM

New sneakers

rusty76 · 01-14-2017, 06:32 PM

Did you install the control arm bushings yourself? Its something I will be looking at doing some day.

NC_John · 01-14-2017, 06:50 PM

Build looks good Larry. You've gotten a lot done since I stopped by a few months go.

**GR8-68** · 01-14-2017, 07:14 PM

Quote:

Originally Posted by rusty76

Did you install the control arm bushings yourself? Its something I will be looking at doing some day.

Yes, it is not that difficult

**GR8-68** · 01-14-2017, 07:15 PM

Quote:

Originally Posted by NC_John

Build looks good Larry. You've gotten a lot done since I stopped by a few months go.

Thanks John, hope to be driving it this summer, I have been wide open on it, the week and a half Christmas vacation really helped

**nlped** · 01-14-2017, 08:12 PM

Man, it is really coming along great! Looks killer for sure

**GR8-68** · 01-14-2017, 08:18 PM

Ordered the stencils today for the lettering and the star for the door

rusty76 · 01-14-2017, 10:44 PM

I will be interested to see the door art.

YJ_Aaron · 01-15-2017, 12:15 AM

Loving it!

**GR8-68** · 01-15-2017, 08:20 AM

Quote:

Originally Posted by rusty76

I will be interested to see the door art.

Me too that means I am really getting close to sitting in the seat.

**GR8-68** · 01-15-2017, 08:21 AM

Quote:

Originally Posted by YJ_Aaron

Loving it!

Thanks Aaron, it is a lot of work but will definitely be a reward when I can drive it this summer

01-05-2017, 12:43 PM	#177
cknfrmr Registered User Join Date: Apr 2015 Location: kernersville,NC Posts: 197	Re: 68 project I don't have good luck. I would get caught in a monsoon and have to sit it out for 3 days. LOL

01-05-2017, 12:54 PM	#178
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: 68 project Nice work! I got caught one time in the rain in my Mustang on ET Streets. It was not a fun experience, especially on 465 in Indy during rush hour. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

01-05-2017, 03:10 PM	#179
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Thanks, yes I will be very careful if I get caught in the rain, been there done that myself __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-08-2017, 07:42 PM	#183
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Well, I wasn't able to get anything done on ole 68 this weekend due to circumstance but the front tires have come in and the rear tires should be here on Tuesday, this project will continue when hardships in life right now have settled. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-08-2017, 07:57 PM	#184
cknfrmr Registered User Join Date: Apr 2015 Location: kernersville,NC Posts: 197	Re: 68 project hope your talking about weather related stuff and everything is ok man.

01-14-2017, 09:21 AM	#185
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Well, not much has happened in the last couple weeks that thing called life happened. Hopefully soon I can get back at it and get this project back under way. The tires have come in so I can get those mounted and ready to install once I finish getting the suspension bolted up. Just really takes some time to prep all the small parts and paint them up before install but it will be good when it is rolling. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-14-2017, 03:51 PM	#186
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Got some primer on the driver side.. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-14-2017, 03:52 PM	#187
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,105	Re: 68 project lookin good __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-14-2017, 03:54 PM	#188
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project And I also have the a arms and springs in, time to pick up some wheel bearings and seals Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-14-2017, 05:31 PM	#189
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-14-2017, 05:51 PM	#190
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project New sneakers Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

01-14-2017, 06:32 PM	#191
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project Did you install the control arm bushings yourself? Its something I will be looking at doing some day. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

01-14-2017, 06:50 PM	#192
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: 68 project Build looks good Larry. You've gotten a lot done since I stopped by a few months go. __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

01-14-2017, 08:12 PM	#195
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: 68 project Man, it is really coming along great! Looks killer for sure __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-14-2017, 08:18 PM	#196
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Ordered the stencils today for the lettering and the star for the door __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant



Register or Log In To remove these advertisements.

01-14-2017, 10:44 PM	#197
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project I will be interested to see the door art. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

01-15-2017, 12:15 AM	#198
YJ_Aaron Registered User Join Date: Oct 2015 Location: Ozark MO Posts: 141	Re: 68 project Loving it!

Register or Log In To remove these advertisements.