Spark plug wires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Morgan in AR · 12-13-2019, 04:36 PM

What are you using for plug wires on these trucks with a pointless distributor off a newer truck? I bought wires for a 77 truck, but they don't work that well. The distributor cap is too close to the firewall for some of the wires to point in the right direction. That makes the wires too short to run around the back and sides of the engine like they are supposed to. Likewise, the 90 degree boot at the plugs won't let the wires go up and over the manifold, but the wires are too short to point the boots downward. It's a carbuerated 350 in a '65 c20. The distributor is from a '77 or so.
Thanks.

forestb · 12-13-2019, 05:10 PM

Quote:

Originally Posted by Morgan in AR

What are you using for plug wires on these trucks with a pointless distributor off a newer truck? I bought wires for a 77 truck, but they don't work that well. The distributor cap is too close to the firewall for some of the wires to point in the right direction. That makes the wires too short to run around the back and sides of the engine like they are supposed to. Likewise, the 90 degree boot at the plugs won't let the wires go up and over the manifold, but the wires are too short to point the boots downward. It's a carbuerated 350 in a '65 c20. The distributor is from a '77 or so.
Thanks.

I made a set of my own for my 350. Taylormade Brand

**cwcarpenter98** · 12-13-2019, 05:33 PM

I used plug wires that fit a 74 corvette. They fit great with my stock ram horns and are the necessary wire size for the HEI

**Chevy Fleetside** · 12-14-2019, 02:10 PM

Quote:

Originally Posted by cwcarpenter98

I used plug wires that fit a 74 corvette. They fit great with my stock ram horns and are the necessary wire size for the HEI

same here

**The Rocknrod** · 12-14-2019, 04:01 PM

Quote:

Originally Posted by forestb

I made a set of my own for my 350. Taylormade Brand

That's what I like doing. You can make each wire length perfect for you.

Bushman66 · 12-15-2019, 09:08 PM

I ordered 2 sets of ACDelco 628M wires and used the longest wires (I DETEST making my own wires). They were cheap enough (about $25/set that it wasn't too painful). I toss a couple of the medium length wires into the toolbox in case I burn a wire, etc out on the road.

rpmerf · 12-16-2019, 07:57 AM

If you look on Summit Racing, some sets specify under manifold, over manifold, over valve cover.

oldtrux · 12-16-2019, 07:26 PM

check out dui,davis unified ignition
there dizzys and wires are very nice

12-13-2019, 04:36 PM	#1
Morgan in AR Registered User Join Date: Aug 2019 Location: Elm Springs AR Posts: 10	Spark plug wires What are you using for plug wires on these trucks with a pointless distributor off a newer truck? I bought wires for a 77 truck, but they don't work that well. The distributor cap is too close to the firewall for some of the wires to point in the right direction. That makes the wires too short to run around the back and sides of the engine like they are supposed to. Likewise, the 90 degree boot at the plugs won't let the wires go up and over the manifold, but the wires are too short to point the boots downward. It's a carbuerated 350 in a '65 c20. The distributor is from a '77 or so. Thanks. Last edited by Morgan in AR; 12-13-2019 at 04:39 PM. Reason: Forgot info

12-13-2019, 05:33 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Spark plug wires I used plug wires that fit a 74 corvette. They fit great with my stock ram horns and are the necessary wire size for the HEI __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

12-15-2019, 09:08 PM	#6
Bushman66 Registered User Join Date: Apr 2019 Location: Phx, Arizona Posts: 131	Re: Spark plug wires I ordered 2 sets of ACDelco 628M wires and used the longest wires (I DETEST making my own wires). They were cheap enough (about $25/set that it wasn't too painful). I toss a couple of the medium length wires into the toolbox in case I burn a wire, etc out on the road.

12-16-2019, 07:57 AM	#7
rpmerf Registered User Join Date: Feb 2011 Location: Parkville, MD Posts: 1,024	Re: Spark plug wires If you look on Summit Racing, some sets specify under manifold, over manifold, over valve cover. __________________ 1970 C20 Custom Camper - 350, TH350 1997 GMC Suburban 1994 Acura Integra GSR 1987 Dodge Daytona Shelby Z

12-16-2019, 07:26 PM	#8
oldtrux Registered User Join Date: Jul 2010 Location: Bancroft, ontario Posts: 550	Re: Spark plug wires check out dui,davis unified ignition there dizzys and wires are very nice



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.