The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-04-2017, 02:12 PM   #11
Senior Member
joedoh's Avatar
Join Date: May 2007
Location: Doodah Kansas
Posts: 3,714
Re: S10 Swap how to

awesome news! glad to hear it chris

Mains52, I have hung a motor and trans in the hole using a cherry picker, jacks, and holding my tongue right to weld in mounts. level the frame first, then level the motor 4 degrees down towards the rear. keep a little offset to the passenger side (use the oval holes on the top of the s10 frame to the cast line on your trans) and keep the motor straight in the frame. by the time you set everything where it needs to be, you can tack in your mounts.
the mass of men live lives of quiet desperation

Project: Hannah
my 4.3 5spd S10 41 Chevy 1/2 ton

if there is a problem, I can have it.

Last edited by joedoh; 05-04-2017 at 02:20 PM.
joedoh is online now   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 11:15 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013