LS1 into a 73 cheyenne - Page 38 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud.man.rj · 07-01-2013, 02:26 AM

LS is coming together nicely, sure is different than a Gen 1 engine isn't it.

68GMCCustom · 07-01-2013, 01:26 PM

Looks good. be aware that you may (from what I've read) have to trim the inside of the timing cover a bit to clear the double chain/gears

smokedat · 07-02-2013, 01:31 AM

Thanks for the input, i'll take close attention to this. still few days away from installing pump

Quote:

Originally Posted by 68GMCCustom

Looks good. be aware that you may (from what I've read) have to trim the inside of the timing cover a bit to clear the double chain/gears

smokedat · 07-02-2013, 01:42 AM

I finally completed the Camshaft Degreeing Procedure. I tried the method of just lining up the dots to see how close it would be and then i degreed it and compare results. By simply lining up the dots i was advanced 6*. Following the centerline method and actually degreeing the cam i was right on the specs. from the cam card

mcbassin · 07-02-2013, 11:06 AM

Looks like some very nice tools. I wouldn't expect anything less. Keep the updates coming.

docstheman · 07-02-2013, 01:25 PM

Wow, really sweet build!

68 TT · 07-05-2013, 12:19 AM

Great pics Alex. Love the antique look you gave some of them too.

Making good progress. Nice to see you back at it. Keep it up.
Posted via Mobile Device

smokedat · 07-05-2013, 07:38 PM

Thanks, pics are a very important part of the build so i try and make them appealing

Quote:

Originally Posted by 68 TT

Great pics Alex. Love the antique look you gave some of them too.

Making good progress. Nice to see you back at it. Keep it up.
Posted via Mobile Device

smokedat · 07-05-2013, 07:55 PM

I have completed the head assembly mock up and clearances are now good. I also need new shorter push rods at 7'', according to the calculations PTV clearance is good and on the safe side, this was my worst case scenario valves crashing into pistons. On the LS series they recommend to stay below a .600 max lift on the valves other wise you will need to shave pistons or add a thicker gasket or adjust cam timing.
Here are a few pics of the MLS gasket, and the valvetrain set up, minus the pushrods thats why they're all up, and one pic with the taller valve covers.

mikekaye69 · 07-08-2013, 04:24 PM

Very cool indeed...

mcbassin · 07-09-2013, 11:18 AM

Great pictures!

Gordonr1973 · 07-14-2013, 09:10 PM

Very nice --- as usual!!

smokedat · 07-18-2013, 10:44 PM

Hey fellas build is coming along heads are complete and torqued rockers are set and lashed, i went with COMP Cams High Energy Pushrods at 7.00". dressed in ARP hardware from crank internals to heads.

smokedat · 07-18-2013, 10:45 PM

I have a question how do i advertise my extra parts??? i tried this once here and i got deleted??

**nlped** · 07-18-2013, 11:02 PM

I think you have to post them in the "For Sale" forum. And you have to be a paying member of the forum. It's only like $25 & its well worth it for all the extra perks.
Posted via Mobile Device

smokedat · 07-18-2013, 11:36 PM

Thanks, no wonder i couldn't post my for sale items

Quote:

Originally Posted by nlped

I think you have to post them in the "For Sale" forum. And you have to be a paying member of the forum. It's only like $25 & its well worth it for all the extra perks.
Posted via Mobile Device

smokedat · 08-04-2013, 07:44 PM

cant upload any pics no matter how low i reduce the file size WTF. BS cant impede me from uploading pics to my thread followers.

blazinfab · 12-22-2013, 08:06 PM

Any updates on this ?

1987cut · 12-30-2013, 12:35 AM

Awe man!?!? I just read this whole build up to this point. What a disappointment. I just knew I was going to see the finished product! Please update!

mcbassin · 12-30-2013, 09:20 AM

Where you at Alex?

Jake Wade · 12-30-2013, 11:36 PM

I just found this thread and went through all 38 pages. You really,really have some serious skills man. Nice work!

blazinfab · 12-31-2013, 12:01 AM

Talked to him other day, said he's taking a break for a bit!

NastyBuzzard · 05-13-2014, 08:44 AM

Wicked.. Just read through all of this. Excited to see the finished product!

naphtali5725 · 07-05-2014, 02:01 AM

Quote:

Originally Posted by blazinfab

Talked to him other day, said he's taking a break for a bit!

any updates???

kvn1011 · 07-05-2014, 02:53 PM

fingers crossed for an update!!

07-01-2013, 02:26 AM	#926
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: LS1 into a 73 cheyenne LS is coming together nicely, sure is different than a Gen 1 engine isn't it.

07-01-2013, 01:26 PM	#927
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: LS1 into a 73 cheyenne Looks good. be aware that you may (from what I've read) have to trim the inside of the timing cover a bit to clear the double chain/gears __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-02-2013, 01:42 AM	#929
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I finally completed the Camshaft Degreeing Procedure. I tried the method of just lining up the dots to see how close it would be and then i degreed it and compare results. By simply lining up the dots i was advanced 6*. Following the centerline method and actually degreeing the cam i was right on the specs. from the cam card Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

07-02-2013, 11:06 AM	#930
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Looks like some very nice tools. I wouldn't expect anything less. Keep the updates coming. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-02-2013, 01:25 PM	#931
docstheman Registered User Join Date: Jun 2013 Location: Tyler, TX Posts: 102	Re: LS1 into a 73 cheyenne Wow, really sweet build! __________________ ~ It's a Learning Process ~ Click Here for my Blazer Build: 1971 Blazer 4x4 Click Here for my Work Truck Build: 1970 C10 LWB Toys: 1970 C10, 1971 Blazer 4x4, 1976 Corvette Stingray L82, 2011 Cadillac CTS 6 speed, 2008 VTX 1800F

07-05-2013, 12:19 AM	#932
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: LS1 into a 73 cheyenne Great pics Alex. Love the antique look you gave some of them too. Making good progress. Nice to see you back at it. Keep it up. Posted via Mobile Device __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

07-05-2013, 07:55 PM	#934
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I have completed the head assembly mock up and clearances are now good. I also need new shorter push rods at 7'', according to the calculations PTV clearance is good and on the safe side, this was my worst case scenario valves crashing into pistons. On the LS series they recommend to stay below a .600 max lift on the valves other wise you will need to shave pistons or add a thicker gasket or adjust cam timing. Here are a few pics of the MLS gasket, and the valvetrain set up, minus the pushrods thats why they're all up, and one pic with the taller valve covers. Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

07-08-2013, 04:24 PM	#935
mikekaye69 Registered User Join Date: May 2013 Location: Middle River, Md. Posts: 28	Re: LS1 into a 73 cheyenne Very cool indeed...

07-09-2013, 11:18 AM	#936
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Great pictures! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-14-2013, 09:10 PM	#937
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: LS1 into a 73 cheyenne Very nice --- as usual!! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

07-18-2013, 10:44 PM	#938
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Hey fellas build is coming along heads are complete and torqued rockers are set and lashed, i went with COMP Cams High Energy Pushrods at 7.00". dressed in ARP hardware from crank internals to heads. __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

07-18-2013, 10:45 PM	#939
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I have a question how do i advertise my extra parts??? i tried this once here and i got deleted?? __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

07-18-2013, 11:02 PM	#940
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: LS1 into a 73 cheyenne I think you have to post them in the "For Sale" forum. And you have to be a paying member of the forum. It's only like $25 & its well worth it for all the extra perks. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-04-2013, 07:44 PM	#942
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne cant upload any pics no matter how low i reduce the file size WTF. BS cant impede me from uploading pics to my thread followers. __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

12-22-2013, 08:06 PM	#943
blazinfab Registered User Join Date: Oct 2013 Location: Calgary Alberta Posts: 34	Re: LS1 into a 73 cheyenne Any updates on this ?



Register or Log In To remove these advertisements.

12-30-2013, 12:35 AM	#944
1987cut Registered User Join Date: Oct 2012 Location: Covington, La Posts: 16	Re: LS1 into a 73 cheyenne Awe man!?!? I just read this whole build up to this point. What a disappointment. I just knew I was going to see the finished product! Please update!

12-30-2013, 09:20 AM	#945
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Where you at Alex? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-30-2013, 11:36 PM	#946
Jake Wade Registered User Join Date: Aug 2005 Location: Louisiana Posts: 711	Re: LS1 into a 73 cheyenne I just found this thread and went through all 38 pages. You really,really have some serious skills man. Nice work!

12-31-2013, 12:01 AM	#947
blazinfab Registered User Join Date: Oct 2013 Location: Calgary Alberta Posts: 34	Re: LS1 into a 73 cheyenne Talked to him other day, said he's taking a break for a bit!

05-13-2014, 08:44 AM	#948
NastyBuzzard Registered User Join Date: Oct 2013 Location: Saluda, SC Posts: 1,275	Re: LS1 into a 73 cheyenne Wicked.. Just read through all of this. Excited to see the finished product!

07-05-2014, 02:53 PM	#950
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: LS1 into a 73 cheyenne fingers crossed for an update!! __________________ My Build Thead (Project Slow Motion)

Register or Log In To remove these advertisements.