The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2020, 07:13 AM   #26
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,661
Re: ‘89 V(K)30 cab and chassis part out.

Clutch switch on hydro pedals I know uses the same plug as the older wiper motors under the hood on our trucks . I have used a few over the years . I forget the exact range tho of years .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 11-09-2020, 07:39 AM   #27
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
Yep let me dig into it tomorrow after work but I’m confident that plug is still there. Do you have a picture by chance so I’m sure I get the right one?
It would be the plug that fits the switch. There may be two plugs, each being square and should have two wires each. I'll take them both. Each one is square with a matching Tang on one corner that corresponds with the cavity in the switch.
Attached Images
 
SunSoaked is offline   Reply With Quote
Old 11-09-2020, 10:26 AM   #28
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by sweetk30 View Post
Clutch switch on hydro pedals I know uses the same plug as the older wiper motors under the hood on our trucks . I have used a few over the years . I forget the exact range tho of years .
Any idea what the other plug in that switch is for?
SunSoaked is offline   Reply With Quote
Old 11-09-2020, 03:28 PM   #29
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

Ok I was pretty sure that’s what they looked like. I’ll check it out tonight
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-09-2020, 05:28 PM   #30
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,661
Re: ‘89 V(K)30 cab and chassis part out.

if i recall 1 does normal open and the other is normal closed .

otherwise i got no idea .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 11-09-2020, 10:24 PM   #31
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

I checked when I got home and I do believe I know which ones they are. I’m gonna do a little research tonight to make sure and then I’ll try and get pictures tomorrow. The harness from this truck is uncut so I know I’ve got them.
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-09-2020, 10:26 PM   #32
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
I checked when I got home and I do believe I know which ones they are. I’m gonna do a little research tonight to make sure and then I’ll try and get pictures tomorrow. The harness from this truck is uncut so I know I’ve got them.
Awesome. I appreciate your time and effort.
SunSoaked is offline   Reply With Quote
Old 11-10-2020, 01:46 AM   #33
mosesburb
I had a V-8

 
mosesburb's Avatar
 
Join Date: May 2003
Location: Phoenix AZ
Posts: 1,116
Re: ‘89 V(K)30 cab and chassis part out.

Is the boot/seal on the upper end of the lower steering intermediate shaft in good condition? No tears/rips, etc?
__________________
1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.
mosesburb is offline   Reply With Quote
Old 11-10-2020, 11:52 AM   #34
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

I don’t remember there being any issues with it but I’ll check tonight and post pictures
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-10-2020, 04:58 PM   #35
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

@57taskforce,

Found a couple of pix of the plugs with wire colors.
Attached Images
  
SunSoaked is offline   Reply With Quote
Old 11-10-2020, 07:14 PM   #36
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

Great! That helps a lot. I’ll get you some pictures of what I’ve got soon.
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-10-2020, 08:29 PM   #37
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

Here’s what I’ve got, the boot on the intermediate shaft unfortunately has a small tear in it. If your interested still I can come down on the price, how’s $30 plus shipping sound? It still has wet grease inside the boot.

I found the connectors but one of mine has a third wire. The wire colors in the white connector are red with a purple stripe, black with a white stripe and brown. These two connectors are right next to each other in the harness and are the only two really in the proximity of where the clutch switch was.
Attached Images
   
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-10-2020, 09:18 PM   #38
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
Here’s what I’ve got, the boot on the intermediate shaft unfortunately has a small tear in it. If your interested still I can come down on the price, how’s $30 plus shipping sound? It still has wet grease inside the boot.

I found the connectors but one of mine has a third wire. The wire colors in the white connector are red with a purple stripe, black with a white stripe and brown. These two connectors are right next to each other in the harness and are the only two really in the proximity of where the clutch switch was.
Ok cool. That black connector is the one I need. I can tell from the pic the white connector doesn't fit the socket in the switch. That's ok cuz I only need the black one. I discovered today from another site that the windshield wiper motor uses the same plug. I checked when I got home and indeed it does!

So....would you snip me a nice long pigtail for the black connector on the clutch switch AND the same connector on the wiper motor?

Let me know what you need for your time. You can probably drop them in an envelope and mail them. PayPal?

Thanks.
SunSoaked is offline   Reply With Quote
Old 11-11-2020, 02:41 AM   #39
mosesburb
I had a V-8

 
mosesburb's Avatar
 
Join Date: May 2003
Location: Phoenix AZ
Posts: 1,116
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
Here’s what I’ve got, the boot on the intermediate shaft unfortunately has a small tear in it. If your interested still I can come down on the price, how’s $30 plus shipping sound? It still has wet grease inside the boot.
Unfortunately, the boot is really the only part I need. Yours is better than any I have here, so I will keep it in mind as I keep searching. I appreciate you checking it out for me and the lower price offer.
__________________
1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.
mosesburb is offline   Reply With Quote
Old 11-11-2020, 12:49 PM   #40
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by mosesburb View Post
Unfortunately, the boot is really the only part I need. Yours is better than any I have here, so I will keep it in mind as I keep searching. I appreciate you checking it out for me and the lower price offer.
I understand.


SunSoaked, I’ll see if I can get a look at the wiper motor connector this evening.
If it will work for you how does $25 shipped sound?
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-12-2020, 10:02 AM   #41
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by sweetk30 View Post
Clutch switch on hydro pedals I know uses the same plug as the older wiper motors under the hood on our trucks . I have used a few over the years . I forget the exact range tho of years .
Thanks for that tip Sweetk30. You are correct, the wiper plug on my truck is the same as the clutch switch plug I'm looking for. Now I just need to find one or the other. lol
SunSoaked is offline   Reply With Quote
Old 11-12-2020, 10:04 AM   #42
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
I understand.


SunSoaked, I’ll see if I can get a look at the wiper motor connector this evening.
If it will work for you how does $25 shipped sound?
Awesome. That's a fair price for your time and a .05 part. LOL
SunSoaked is offline   Reply With Quote
Old 11-12-2020, 08:22 PM   #43
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by SunSoaked View Post
Awesome. That's a fair price for your time and a .05 part. LOL
Well I ran into a problem... I went to cut the connectors off this afternoon. I didn’t think about it earlier but I sold part of the fire wall harness with the engine, in the part I sold was the wiper motor harness. So it looks like all I’ve got is the one black connector. This truck is pretty heavily parted at this point and I apologize for not thinking about it sooner.
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-12-2020, 08:46 PM   #44
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,661
Re: ‘89 V(K)30 cab and chassis part out.

80's wipers with electric pump in washer tank are different plug . So the ends you had would not of worked .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 11-12-2020, 09:55 PM   #45
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
Well I ran into a problem... I went to cut the connectors off this afternoon. I didn’t think about it earlier but I sold part of the fire wall harness with the engine, in the part I sold was the wiper motor harness. So it looks like all I’ve got is the one black connector. This truck is pretty heavily parted at this point and I apologize for not thinking about it sooner.

No problem. I'm 99% sure they black plug with the purple/yellow wires so posted a pic of in post "37 is what I need.

How bout you send me that plug with a good 6 inch pigtail and I'll send ya $20?

Appreciate your time.
SunSoaked is offline   Reply With Quote
Old 11-12-2020, 11:26 PM   #46
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

I can do that. I’ll get it cut in the Morning. I’ll pm you my PayPal email In a little bit.
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-14-2020, 12:52 AM   #47
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

Paypal received. I will try and get it out tomorrow morning.
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-20-2020, 10:39 PM   #48
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,365
Re: ‘89 V(K)30 cab and chassis part out.

@57taskforce

Do you have the plastic clutch master cylinder? It should be attached with a small bracket to the wiper motor.
SunSoaked is offline   Reply With Quote
Old 11-22-2020, 01:45 AM   #49
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,554
Re: ‘89 V(K)30 cab and chassis part out.

If your talking about the clutch fluid reservoir, I don’t it sold already in this thread. I do have master cylinder still but in all honesty probably not worth chancing used vs. buying new.
__________________
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is online now   Reply With Quote
Old 11-22-2020, 09:15 AM   #50
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,661
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by SunSoaked View Post
@57taskforce

Do you have the plastic clutch master cylinder? It should be attached with a small bracket to the wiper motor.
Ford used a little firewall mounted bottle almost like our bottle. Could score one of them in a pinch.
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com