My K/5 Bikini Top

[OldCreek]

I just wanted to post an example of what I've done. Maybe it will serve as a motivation. It took me years to get around to it!

I took one of robs71k5 fiberglass windshield headers and used it to mount a bikini top. I initially planned to use snap ring connectors but instead used heavy duty velcro tape and sewed it onto the top and taped it to the header. I suppose that if you have a soft topper and Rob's header you could match up the snaps and install one of your own bikinis. If the velcro is not strong enough I will add some snaps but it doesn't appear necessary at this time.

I took water resistant/UV resistant outdoor canvas and UV resistant nylon thread and sewed this up at home with 1" straps. I added some plastic disconnects and a metal strap mount. The strap mount connects to my rear roll bar anchor point. The plastic disconnects allow for tighter tension. I, also, used a couple of strap locks to keep them from loosening. (not pictured)

It needs a little fine tuning but I'm happy.

The ride is much nicer up front. The amount of wind is really cut down. I can drive without sunglasses on now. Before that, there was way too much wind/dust that would get in my eyes. The shade is nice, too.