'66 GMC BBW w/351E and Factory Buckets - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C@rnut001 · 07-08-2012, 08:46 PM

Well, good luck with it when you get to it after the other builds come together....and keep us posted on it when you do start working on it again. It is great to read about all the trucks you guys work and wrench on to make them nice!

GMC66 · 07-09-2012, 01:48 PM

Nice Truck! Hope the engine is fine!

oklahomaduner · 04-29-2013, 03:51 AM

After letting this one sit for about a year I decided to try to break into her.

Without the proper knowledge to work on one of these motors my only bet is to find someone who is A LOT better than me. Haha

After I got that little spark back up I decide to do some trading for a short term motor so I could get it back on the road while I figure out the problem with the 351

Now I know I'll catch hell from the purists on here but the 351 is going back in one day and the truck will get a proper resto. But until I'm older, wiser, and not "college kid broke" I'm going to do the best I can with what I've got!! Lol

Now back to the new motor, I managed to turn 100$ into an '86 350 bored .030 over, 288 cam, vortec heads, and all new accessories through a few trades over the past month. It needs a little tuning but it was just rebuilt. Anyways, here are a few pics!!
Posted via Mobile Device

oklahomaduner · 04-29-2013, 03:52 AM

I can only upload one at a time..
Posted via Mobile Device

oklahomaduner · 04-29-2013, 03:53 AM

Posted via Mobile Device

oklahomaduner · 04-29-2013, 03:56 AM

One last pic
Posted via Mobile Device

66-PMD-GMC · 04-29-2013, 10:30 AM

Don't feel bad dude... it's your truck to do as you see fit ...
Personally, I stay as far away from SBC as I can because everyone does it, it's all you see... and I rarely follow the leader..

HOWEVER, as I said.. it's your ride.. get-er on the road however you want or can...

**nbrfd007** · 04-30-2013, 10:25 PM

Quote:

Originally Posted by oklahomaduner

I can only upload one at a time..
Posted via Mobile Device

Well, can I come back up and bring home the 351 motor and trans? Like to buy them from you.
Thanks,
Tim

oklahomaduner · 04-30-2013, 10:50 PM

Haha you wouldn't want to pay what I'd want out of it. But I'm going to get it rebuilt as soon as I can afford it and drop her back in.
Posted via Mobile Device

Rufton · 04-30-2013, 11:27 PM

Quote:

Originally Posted by oklahomaduner

Haha you wouldn't want to pay what I'd want out of it. But I'm going to get it rebuilt as soon as I can afford it and drop her back in.
Posted via Mobile Device

Really nice truck!

May not be a bad idea to troubleshoot the V6 as time allows so you can keep an eye open for parts needed.

**dtkarst** · 02-22-2014, 07:56 PM

I just picked one up that isnt as well optioned as yours, but has the same seats and trim. Do you know much more about the seat package at all?

**GMCNUT** · 05-23-2015, 02:20 PM

Quote:

Originally Posted by dtkarst

I just picked one up that isnt as well optioned as yours, but has the same seats and trim. Do you know much more about the seat package at all?

The special seats were a 1966 only option you could add to any 66 GMC but when paired with a 351 V6 and special interior treatments, it was called the "sport" option package - I used to have a magazine advertisement showing a 351 V6 equipped 66 GMC w/ these seats and other options racing against a Camaro and pulling ahead of it in the photo - it was the coolest ad, but the framing shop destroyed it accidentally and I have yet to find another since.

**GMCNUT** · 05-23-2015, 02:25 PM

Quote:

Originally Posted by dtkarst

I just picked one up that isnt as well optioned as yours, but has the same seats and trim. Do you know much more about the seat package at all?

The sport optioned trucks came with Charcoal stick-on vinyl lower door coverings, and the door panels were covered in Charcoal vinyl, and it was the first time GM ever offered carpet in a truck - these Sport package equipped trucks came with Charcoal carpeting, coordinating darker non-fawn interior paint and Charcoal armrests and visors. Typically the Turbo 400 was part of this package, but I have seen some with Powerglides, so not sure if they got swapped years later or if they came that way. Very hard to find anyone who knows anything about the Sport package or its options.

66-PMD-GMC · 05-23-2015, 02:53 PM

How did they marry up the TH400 to the V6..?
Factory adaptors?

factorystock · 05-23-2015, 06:32 PM

Quote:

Originally Posted by RockTonka

Yea, that and the HEI really woke it up, the 3.42s have it spinning pretty good around 70, but it'll still jump out for passing...we're going to drop a little tach on it for monitoring though.

I'm afraid you missed my other posts regarding the V6. The V6's are low rpm high torque engines, similar to large diesel truck engines. They run forever at low rpms, however, they do not like high rpm! The best way to destroy a V6 is excessive rpm, they spin bearings.

factorystock · 05-23-2015, 06:43 PM

Quote:

Originally Posted by GMCNUT

Very hard to find anyone who knows anything about the Sport package or its options.

Page 1 post # 19. Hard to believe for most, but GMC beat out Chevy by one year by offering this new package in '66.

**MusicMan70** · 05-23-2015, 09:04 PM

Quote:

How did they marry up the TH400 to the V6..?
Factory adaptors?

Yes they used a factory adapter and these support rods. Not sure if the Powerglides used those.

**Classic v6 GMC's** · 05-23-2015, 10:17 PM

Quote:

Originally Posted by GMCNUT

The special seats were a 1966 only option you could add to any 66 GMC but when paired with a 351 V6 and special interior treatments, it was called the "sport" option package - I used to have a magazine advertisement showing a 351 V6 equipped 66 GMC w/ these seats and other options racing against a Camaro and pulling ahead of it in the photo - it was the coolest ad, but the framing shop destroyed it accidentally and I have yet to find another since.

The sports trim option was available on 1/2 ton and 3/4 ton trucks with 2 wheel drive. It did not matter which motor and transmission was ordered. The sports option also was not available on 4x4's, 1 tons or suburbans. All of this info came out of the 1966 Light Duty Condensed Data Book. I also have the advertisement that you had and will post a pic of it.

**Classic v6 GMC's** · 05-23-2015, 10:43 PM

RockTonka · 05-24-2015, 02:05 AM

My son actually sold this truck today...local enthusiast is building it for he and his son. His plans are to rebuild the 351 and keep the original patina.

**GMCNUT** · 05-25-2015, 03:19 AM

Quote:

Originally Posted by MusicMan70

Yes they used a factory adapter and these support rods. Not sure if the Powerglides used those.

I know a guy who is looking for one of these adaptor setups if you or anyone else has one to sell

**GMCNUT** · 05-25-2015, 03:21 AM

Quote:

Originally Posted by Classic v6 GMC's

You dont want to sell this ad do you? I hate I lost mine....

**Classic v6 GMC's** · 05-25-2015, 09:29 PM

Quote:

Originally Posted by GMCNUT

You dont want to sell this ad do you? I hate I lost mine....

Sorry but I can't. It is the only real proof that my dads truck is original.

**60-66** · 05-26-2015, 09:51 AM

Have you posted any pictures of your Dads truck ? Love to see it.

**Classic v6 GMC's** · 05-26-2015, 09:31 PM

Quote:

Originally Posted by 60-66

Have you posted any pictures of your Dads truck ? Love to see it.

60-66, I posted a few pics of my truck and my dads truck in this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=670629

07-08-2012, 08:46 PM	#126
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: '66 GMC BBW w/351E and Factory Buckets Well, good luck with it when you get to it after the other builds come together....and keep us posted on it when you do start working on it again. It is great to read about all the trucks you guys work and wrench on to make them nice! __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

07-09-2012, 01:48 PM	#127
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: '66 GMC BBW w/351E and Factory Buckets Nice Truck! Hope the engine is fine!

04-29-2013, 03:51 AM	#128
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: '66 GMC BBW w/351E and Factory Buckets After letting this one sit for about a year I decided to try to break into her. Without the proper knowledge to work on one of these motors my only bet is to find someone who is A LOT better than me. Haha After I got that little spark back up I decide to do some trading for a short term motor so I could get it back on the road while I figure out the problem with the 351 Now I know I'll catch hell from the purists on here but the 351 is going back in one day and the truck will get a proper resto. But until I'm older, wiser, and not "college kid broke" I'm going to do the best I can with what I've got!! Lol Now back to the new motor, I managed to turn 100$ into an '86 350 bored .030 over, 288 cam, vortec heads, and all new accessories through a few trades over the past month. It needs a little tuning but it was just rebuilt. Anyways, here are a few pics!! Posted via Mobile Device Attached Images __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

04-29-2013, 03:52 AM	#129
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: '66 GMC BBW w/351E and Factory Buckets I can only upload one at a time.. Posted via Mobile Device Attached Images __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

04-29-2013, 03:53 AM	#130
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: '66 GMC BBW w/351E and Factory Buckets Posted via Mobile Device Attached Images __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

04-29-2013, 03:56 AM	#131
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: '66 GMC BBW w/351E and Factory Buckets One last pic Posted via Mobile Device Attached Images __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

04-29-2013, 10:30 AM	#132
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: '66 GMC BBW w/351E and Factory Buckets Don't feel bad dude... it's your truck to do as you see fit ... Personally, I stay as far away from SBC as I can because everyone does it, it's all you see... and I rarely follow the leader.. HOWEVER, as I said.. it's your ride.. get-er on the road however you want or can... __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

04-30-2013, 10:50 PM	#134
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: '66 GMC BBW w/351E and Factory Buckets Haha you wouldn't want to pay what I'd want out of it. But I'm going to get it rebuilt as soon as I can afford it and drop her back in. Posted via Mobile Device __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

02-22-2014, 07:56 PM	#136
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: '66 GMC BBW w/351E and Factory Buckets I just picked one up that isnt as well optioned as yours, but has the same seats and trim. Do you know much more about the seat package at all?

05-23-2015, 02:53 PM	#139
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: '66 GMC BBW w/351E and Factory Buckets How did they marry up the TH400 to the V6..? Factory adaptors? __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

05-23-2015, 10:43 PM	#144
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: '66 GMC BBW w/351E and Factory Buckets Advertisement Attached Images

05-24-2015, 02:05 AM	#145
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: '66 GMC BBW w/351E and Factory Buckets My son actually sold this truck today...local enthusiast is building it for he and his son. His plans are to rebuild the 351 and keep the original patina. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

05-26-2015, 09:51 AM	#149
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,322	Re: '66 GMC BBW w/351E and Factory Buckets Have you posted any pictures of your Dads truck ? Love to see it. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.