D44 ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burlinator · 09-21-2002, 08:02 AM

scored a dodge dana 44 for nothin last week and just wondering if I can swap the axles and stuff over to chevy? or is it already the same?
it is for my willy's so its not like it has to be all chevy but I would prefer for spare parts ordering and stuff and who wants to admit htey run dodge stuff LOL

powermad · 09-21-2002, 04:24 PM

AFAIK The internals are the same between them.
The spring perches are narower on The Dodge axle.
Does it have the full time hubs on it, big nut with a cotter pin?
Or does it have regular lockouts on it.

Burlinator · 09-23-2002, 11:42 PM

yeah its full time thats the way I plan on running it

powermad · 09-24-2002, 06:13 AM

That axle is one of Dodges creation.
Chevy parts will not interchange with it.
Everyone I know steers clear of those axles.
A GM front axle would be a better bet.
And if you are just going to use 1/2 ton axles they are pretty cheap.
I couldn't even give away my 1/2 ton stuff.
They wound up in a salvge yard.
I paid $250 for my D44 8 lug and 14 bolt FF with 4:10 gears.

munkjeep · 09-25-2002, 05:27 AM

You can swap the kuckles out with chevy dana 44 parts, use the dodge inner axle shaft, with the chevy outer stub axle. I converted my dodge 3/4 to chevy 3/4 this way to get rid of the weak dodge bearing set up. If you are going to put it in a jeep, do the same thing except use a ford dana 44 parts and then you can keep the jeep wheel lug nut pattern.

Pont · 09-25-2002, 06:39 AM

Burlinator, wanna make a trip to Oregon? I have a closed knuckle Dana 44 I can't give away. Nothing wrong with it, works great and has 4.10 gears. I guess being closed knuckle makes it worth about as much as the used gear oil that's in it

palallin · 09-25-2002, 02:30 PM

I'd take that, but I have no idea how to get it from Oregon to Missouri.

Quote:

Originally posted by Pont
Burlinator, wanna make a trip to Oregon? I have a closed knuckle Dana 44 I can't give away. Nothing wrong with it, works great and has 4.10 gears. I guess being closed knuckle makes it worth about as much as the used gear oil that's in it

*Fast68Chevy* · 09-28-2002, 02:44 AM

when i was 16 i let a pair of matched 70-something ram charger 1/2 ton axles go to scrap guy, were probably dana 44 and whatever rear axle dodge 4x4 use(anyone know)?

i probably would have kept them if i had them nowadays, at least used them for parts or something.,

i had no clue at all back then,

good luck

09-21-2002, 08:02 AM	#1
Burlinator Just Another Crazy Canuck Join Date: Dec 2000 Location: Richmond,British Columbia Canada Posts: 1,228	D44 ? scored a dodge dana 44 for nothin last week and just wondering if I can swap the axles and stuff over to chevy? or is it already the same? it is for my willy's so its not like it has to be all chevy but I would prefer for spare parts ordering and stuff and who wants to admit htey run dodge stuff LOL __________________ 1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI

09-21-2002, 04:24 PM	#2
powermad Hillbilly Hotrod Join Date: Nov 2001 Location: Oregon Posts: 69	AFAIK The internals are the same between them. The spring perches are narower on The Dodge axle. Does it have the full time hubs on it, big nut with a cotter pin? Or does it have regular lockouts on it. __________________ 69 K5, .060 over 350/465/205.

09-23-2002, 11:42 PM	#3
Burlinator Just Another Crazy Canuck Join Date: Dec 2000 Location: Richmond,British Columbia Canada Posts: 1,228	yeah its full time thats the way I plan on running it __________________ 1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI

09-24-2002, 06:13 AM	#4
powermad Hillbilly Hotrod Join Date: Nov 2001 Location: Oregon Posts: 69	That axle is one of Dodges creation. Chevy parts will not interchange with it. Everyone I know steers clear of those axles. A GM front axle would be a better bet. And if you are just going to use 1/2 ton axles they are pretty cheap. I couldn't even give away my 1/2 ton stuff. They wound up in a salvge yard. I paid $250 for my D44 8 lug and 14 bolt FF with 4:10 gears. __________________ 69 K5, .060 over 350/465/205.

09-25-2002, 06:39 AM	#6
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Burlinator, wanna make a trip to Oregon? I have a closed knuckle Dana 44 I can't give away. Nothing wrong with it, works great and has 4.10 gears. I guess being closed knuckle makes it worth about as much as the used gear oil that's in it __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

09-25-2002, 05:27 AM	#5
munkjeep Registered User Join Date: Aug 2002 Location: Kentucky Posts: 13	You can swap the kuckles out with chevy dana 44 parts, use the dodge inner axle shaft, with the chevy outer stub axle. I converted my dodge 3/4 to chevy 3/4 this way to get rid of the weak dodge bearing set up. If you are going to put it in a jeep, do the same thing except use a ford dana 44 parts and then you can keep the jeep wheel lug nut pattern.

09-28-2002, 02:44 AM	#8
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	when i was 16 i let a pair of matched 70-something ram charger 1/2 ton axles go to scrap guy, were probably dana 44 and whatever rear axle dodge 4x4 use(anyone know)? i probably would have kept them if i had them nowadays, at least used them for parts or something., i had no clue at all back then, good luck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.