What did you do to your truck today? - Page 160 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vernski · 09-22-2011, 06:20 PM

Quote:

Originally Posted by 1Bad62Pro/Street

You gonna paint her yellow? ;-)
Vernski, you look like one my dads friends called Santa Clause.
He has a lot of toyz he brings to the crusins/car shows one of them is a 40 something Anglia Pro/Street. ;-)
Posted via Mobile Device

I'm going to paint it the yellow green & ivory that way I wont have to paint the fire wall, it's not yellow but it's close. Hey last winter when I was at Wall-mart a guy asked me if I want to be one of there Santa's? I said no that when I had girls set on my lap I had bad thoughts and he went away quickly. By the way I like old gassers....Vernski

csa daddy · 09-22-2011, 07:53 PM

i got an ac system for 250 an some shortbed trim for my 64 so now the ol girl will be fully optioned out an i think i got a 61 sub in trade also just need to run down an pic it up

Vernski · 09-22-2011, 11:51 PM

The Fed-X guy brought a pkg today the Wifie had ordered me some embroidered floor mats with a GMC logo what a sweetheart. I wonder if she's up to something well it don't mater it was cool of her here's a couple of pic's...Vernski

**Clyde65** · 09-23-2011, 09:47 AM

Very Nice, where did she get them?

steverino66 · 09-23-2011, 11:25 AM

I've seen some really clever cab rotisseries, but I'm too lazy/impatient to build one, so I did this and primered the inside of the cab:

Vernski · 09-23-2011, 12:58 PM

Quote:

Originally Posted by Clyde65

Very Nice, where did she get them?

Hi Clyde she got them from www.stylintrucks.com They are made by Lloyd and were $119.66 w/free shipping...Vernski

chainsaw · 09-23-2011, 01:55 PM

Started sanding on the body, I guess this means I'll have to paint it for real now. I havent painted any thing since the early 80's and all I have is a showtime hvlp ,going to be interesting if anything.

T2vigil · 09-23-2011, 06:23 PM

I finally got around to putting on the front swaybar. If I would have known that it would make that much of a difference I would have put it at the top of the list.

doublebeetx · 09-23-2011, 09:41 PM

Finally got my gas tank in the rear of my 64 short stepside. Ran out of daylight before I could finish plumbing and hear her run again. But I'm off until Tuesday ! Old Flo will be running before the weekend is done !!

towersddg9 · 09-24-2011, 05:27 PM

Pulled the vari rate springs and put in some 2 inch drop from American classic, the others had the a** end way too high

niterider65 · 09-24-2011, 11:34 PM

cleaning up the por runs and getting ready for piant ..

Alan's Classic · 09-25-2011, 12:33 AM

Laid some wood

Woogeroo · 09-25-2011, 04:21 AM

Alan - nice bed.

I stripped wires and soldered & crimped connections on my '65 c10... 4 or 5 patches or replacements altogether.

I only burned myself twice with the soldering iron!

hah. nothing serious just a 'OW-THATS-HOT!' moment toward then end when I was tired and ready to be done with it.

Wired it up, put old head light switch back in... cleaned up, took a nap, went to the cruise in a way over in Dallas, GA in the truck... took those photos, ate some bbq and then walked around some more.

Then I eased on back to the house.

-W

budden · 09-25-2011, 08:25 PM

wax on wax off..............then drove it like i stole it

awbrown · 09-25-2011, 08:49 PM

Well I took ol'blue out for a drive, drove about 30 miles .. Confirmed that the radiator and fan work properly .. I actually looked at a 62 chevy c10 , if anyone is looking for such a project this one has all the lower cab work done... it does need a roof.. but the worst is done... Yeah I know , like I need another project ,as if 2 trucks (3 cars ) etc isnt enough..anyways the engine I put in the truck runs OK,but it does need a bit more oil pressure.. I will worry about that when I get the other truck running and this one goes under the knife...

Turkey · 09-26-2011, 12:59 AM

Put some scallops on it.

Name: IMAG0853.jpg
Views: 498
Size: 28.8 KB

losthope · 09-26-2011, 01:42 AM

Scallops look good i like me some scallops! i also like your masking tape holder

**Clyde65** · 09-26-2011, 05:26 PM

Actually this was Saturday...

Clyde needed some new sneakers so I decided to also put the powder coated wheels on there too. I got two tires put on the two PC wheels, polished the trim rings and the center.

Before...

and after

64shortbox · 09-27-2011, 01:57 AM

I like!!! I plan on installing Rally wheels on my 64 too.

**chevy_man5** · 09-27-2011, 09:00 AM

I lightened it up a bit. I don't know how many pounds of bondo were in each fender, but it was A LOT!!

Passenger's side

Drivers side

SulphuriousSam · 09-27-2011, 09:12 AM

^^^^That's alot of bondo mang!^^^^

**chevy_man5** · 09-27-2011, 09:22 AM

It has been on there for the years I have owned the truck, and at least the 2 years my buddy owned it, and it was still somewhat soft in the middle!

Here is a shot of starting to pull it out of the Passengers side.

I ended up resorting to drilling holes in it, then breaking it out, and repeating over and over!!

SulphuriousSam · 09-27-2011, 09:48 AM

That looks as thick as the plaster walls in my 80 something year old house!

narx66gmc · 09-27-2011, 01:27 PM

finished the wire harness install - super easy w the Economy kit from Speedway - best $150 ive spent on the old truck.

kieth · 09-27-2011, 02:48 PM

Quote:

Originally Posted by towersddg9

Pulled the vari rate springs and put in some 2 inch drop from American classic, the others had the a** end way too high

Front tire size, rear tire size please ? it looks very nice. Kieth

09-22-2011, 07:53 PM	#3977
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: What did you do to your truck today? i got an ac system for 250 an some shortbed trim for my 64 so now the ol girl will be fully optioned out an i think i got a 61 sub in trade also just need to run down an pic it up

09-22-2011, 11:51 PM	#3978
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: What did you do to your truck today? The Fed-X guy brought a pkg today the Wifie had ordered me some embroidered floor mats with a GMC logo what a sweetheart. I wonder if she's up to something well it don't mater it was cool of her here's a couple of pic's...Vernski Attached Images

09-23-2011, 09:47 AM	#3979
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: What did you do to your truck today? Very Nice, where did she get them? __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-23-2011, 11:25 AM	#3980
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: What did you do to your truck today? I've seen some really clever cab rotisseries, but I'm too lazy/impatient to build one, so I did this and primered the inside of the cab: Attached Images

09-23-2011, 01:55 PM	#3982
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: What did you do to your truck today? Started sanding on the body, I guess this means I'll have to paint it for real now. I havent painted any thing since the early 80's and all I have is a showtime hvlp ,going to be interesting if anything.

09-23-2011, 06:23 PM	#3983
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: What did you do to your truck today? I finally got around to putting on the front swaybar. If I would have known that it would make that much of a difference I would have put it at the top of the list.

09-23-2011, 09:41 PM	#3984
doublebeetx Registered User Join Date: Mar 2010 Location: Chandler,Tx Posts: 78	Re: What did you do to your truck today? Finally got my gas tank in the rear of my 64 short stepside. Ran out of daylight before I could finish plumbing and hear her run again. But I'm off until Tuesday ! Old Flo will be running before the weekend is done !!

09-24-2011, 05:27 PM	#3985
towersddg9 Registered User Join Date: Dec 2010 Location: Texas Posts: 246	Re: What did you do to your truck today? Pulled the vari rate springs and put in some 2 inch drop from American classic, the others had the a** end way too high Attached Images

09-24-2011, 11:34 PM	#3986
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: What did you do to your truck today? cleaning up the por runs and getting ready for piant .. Attached Images

09-25-2011, 12:33 AM	#3987
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: What did you do to your truck today? Laid some wood Attached Images __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

09-25-2011, 04:21 AM	#3988
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: What did you do to your truck today? Alan - nice bed. I stripped wires and soldered & crimped connections on my '65 c10... 4 or 5 patches or replacements altogether. I only burned myself twice with the soldering iron! hah. nothing serious just a 'OW-THATS-HOT!' moment toward then end when I was tired and ready to be done with it. Wired it up, put old head light switch back in... cleaned up, took a nap, went to the cruise in a way over in Dallas, GA in the truck... took those photos, ate some bbq and then walked around some more. Then I eased on back to the house. -W

09-25-2011, 08:25 PM	#3989
budden Registered User Join Date: Jul 2007 Location: kimberly idaho Posts: 24	Re: What did you do to your truck today? wax on wax off..............then drove it like i stole it

09-25-2011, 08:49 PM	#3990
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: What did you do to your truck today? Well I took ol'blue out for a drive, drove about 30 miles .. Confirmed that the radiator and fan work properly .. I actually looked at a 62 chevy c10 , if anyone is looking for such a project this one has all the lower cab work done... it does need a roof.. but the worst is done... Yeah I know , like I need another project ,as if 2 trucks (3 cars ) etc isnt enough..anyways the engine I put in the truck runs OK,but it does need a bit more oil pressure.. I will worry about that when I get the other truck running and this one goes under the knife...

09-26-2011, 12:59 AM	#3991
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: What did you do to your truck today? Put some scallops on it. __________________

09-26-2011, 01:42 AM	#3992
losthope Registered User Join Date: Apr 2010 Location: sacramento ca. Posts: 1,038	Re: What did you do to your truck today? Scallops look good i like me some scallops! i also like your masking tape holder __________________ Timmy D. "What that grinding noise?Don't worry about that it will eventually clearance itself!" 1966 chevy c10 Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=485977 1954 ford customline H.A.M.B 54 Build Thread:http://www.jalopyjournal.com/forum/s...d.php?t=622142



Register or Log In To remove these advertisements.

09-26-2011, 05:26 PM	#3993
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: What did you do to your truck today? Actually this was Saturday... Clyde needed some new sneakers so I decided to also put the powder coated wheels on there too. I got two tires put on the two PC wheels, polished the trim rings and the center. Before... and after Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-27-2011, 01:57 AM	#3994
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 732	Re: What did you do to your truck today? I like!!! I plan on installing Rally wheels on my 64 too.

09-27-2011, 09:00 AM	#3995
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: What did you do to your truck today? I lightened it up a bit. I don't know how many pounds of bondo were in each fender, but it was A LOT!! Passenger's side Drivers side __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-27-2011, 09:12 AM	#3996
SulphuriousSam Registered User Join Date: Apr 2011 Location: Sulphur, OK Posts: 316	Re: What did you do to your truck today? ^^^^That's alot of bondo mang!^^^^ __________________ 1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride)

09-27-2011, 09:22 AM	#3997
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: What did you do to your truck today? It has been on there for the years I have owned the truck, and at least the 2 years my buddy owned it, and it was still somewhat soft in the middle! Here is a shot of starting to pull it out of the Passengers side. I ended up resorting to drilling holes in it, then breaking it out, and repeating over and over!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

09-27-2011, 09:48 AM	#3998
SulphuriousSam Registered User Join Date: Apr 2011 Location: Sulphur, OK Posts: 316	Re: What did you do to your truck today? That looks as thick as the plaster walls in my 80 something year old house! __________________ 1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride)

09-27-2011, 01:27 PM	#3999
narx66gmc Registered User Join Date: Sep 2005 Location: Bentonville, AR Posts: 190	Re: What did you do to your truck today? finished the wire harness install - super easy w the Economy kit from Speedway - best $150 ive spent on the old truck. __________________ Build Thread - Papa's truck build up

Register or Log In To remove these advertisements.