The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-28-2018, 02:08 PM   #1
MASTERBrian
Registered User
 
Join Date: Jan 2017
Location: Wichita
Posts: 574
99 K1500 Suburban no high speed ac fan

I hope I'm on the correct year group for this as I realize the 99 Trucks had already switched to the 5th gen body style, yet the burbs lagged a year, so this is a 4th gen body.

This isn't a daily driver anymore so it hasn't been a priority, but I'd like to get it working right. Several years ago I had an issue with the hvac system and I replaced a few parts. It started working again, but the high speed doesn't blow and hasn't since. I just don't recall what I replaced at the time...seems like blower at that time. I know I've replaced the blower resistor and possibly even the relay, but not 100% sure on the relay.

I had someone mention maybe a bad ground to relay and/or resistor and they said if you ground it out to chassis, that's a good quick test. Problem is I don't know which wire to ground or which part. On the relay, I'm guessing it's the black wire going into the 5 wire blower motor relay???

My understanding is the resistor only comes into play for the 1-3 fan speeds and the 4 speed bypasses it. If this is correct I'm guessing I can ignore this piece. Then it seems the relay is mainly for the high speed, BUT if I unhook it, none of the speeds work....makes since, but just pointing out. As for the fan, is it possible I have the wrong blower? It's a VDO PM149 and it seems to cross just fine with my 1999 K1500 Suburban 5.7L LT.

Any ideas or suggestions where to turn?

For what it's worth the relay is a Siemens 12193601. Could it be the control unit? I also checked the wires at the blower and they seem fine....if I unhook nothing works and only two wires that I see.
MASTERBrian is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com