break peddles peddle question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

forestb · 03-13-2018, 04:30 PM

I know that the brake peddles on this trucks are vary high but mine does not seem to even enguage the brakes until the peddle is about half way down.
I have front cpp discs and rear drums with a captonfab booster bracket. they stop the truck fine but it is a little bit of a pain. I have the correct proportioning valve for a disk drum setup. Will shortening the rod and lowering the peddle help? Or will I just be stepping around the problem?

03-13-2018, 04:30 PM	#1
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,584	break peddles peddle question I know that the brake peddles on this trucks are vary high but mine does not seem to even enguage the brakes until the peddle is about half way down. I have front cpp discs and rear drums with a captonfab booster bracket. they stop the truck fine but it is a little bit of a pain. I have the correct proportioning valve for a disk drum setup. Will shortening the rod and lowering the peddle help? Or will I just be stepping around the problem?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.