57 Short Box 235 5sp C4

[svr]

Got some color on the inner fenders and core support

[svr]

And getting close on the doors

[svr]

After my giant paint screwup priming the doors that ended up looking more like bed liner than epoxy i was PO'd so i didnt even take any pics, it took over a week to get the epoxy cured enough to sand and lots of work to get it mostly off. I then reprimed with urethane and put base coat and clear coat on the inside of them and set the aside under cover. Next is to get the cab ready and do the same to it.
I cleaned up the inside and put some epoxy under the dash, firewall and floor. Will let that cure a week or so before i attempt to prime and bc-cc the interior.

[Nut Case]

svr

Strong work..... progress is always good- forward i mean?

Just pushin yur leg.


keep on keepin on



NC

[svr]

Been awhile guess i better do an update. I got the interior and exterior in 2k urethane primer, lots of sanding and blocking followed.

[svr]

A few do overs here and there

[svr]

Got color on the interior