66 pro-touring build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod1 · 08-21-2014, 02:11 PM

I would like to know more about the dash instruments - display.

mark 66 · 08-21-2014, 04:16 PM

just found your build thread. looking back over old frame pics it looks like c4 stuff. awesome build. I did a Camaro a couple years back with a c4 front with coil overs. STRONGLY suggest gusseting from inner frame behind upper control arms to cross member. with sticky tire welds will crack at mounts

66shortwide · 08-21-2014, 08:39 PM

the suede is achieved by just using flat clear coat instead of gloss - my plan was to go shiny, but after spraying the base coat I just really liked that look.

The gauges are Dakota Digital VHX series universal - they make a kit for the original style dash, but I wanted something a little more racy looking. They also make a module that will plug into the obd2 port and supply the gauges all the information the the computer gets.

thanks for the heads up on the control arm mounting.

66shortwide · 08-23-2014, 08:53 PM

nothing new - finished the boom mat install, mounted the fuse box, mounted the trans dipstick, and working on a few small things. Hopefully tomorrow after church I'll get some time and get the ac vents in and the hoses routed. Just a couple of pics of where it is at today.

66shortwide · 09-15-2014, 01:33 PM

So, making slow progress on the wiring - it is so hard to keep things looking nice and clean in the engine compartment. Hopefully, if not out of town to much for work, I can finally hear the motor run in the next week or so!!

duallyjams · 09-15-2014, 07:26 PM

AAAAAAAAAAAAAh working for a living sure does get in the way a lot.

ChrisDollins · 09-18-2014, 09:46 PM

Very cool build! Somehow missed it earlier. Love PT builds.

Chris

mr incredible · 09-20-2014, 07:10 PM

i trust your working on it at this moment LOL

66shortwide · 09-21-2014, 07:56 AM

actually for a change I had most of Sat to work on it. Got all of the motor and trans wiring done, started on the air conditioning wiring, tied up a bunch of little things that needed to be done. Thinking that if all goes well I may be able to try and crank it next week end - that should get me fired back up. All this wiring is tedious and aggravating!!

siroadrnr · 10-24-2014, 08:19 PM

Awesome build thread!! Lots of great ideas for me to "borrow"!!

66shortwide · 11-10-2014, 10:56 AM

So, no new pictures as all I have been doing is a bunch of little things. This project has drug out for so long I was starting to lose motivation, so I decided to get the engine running to get me back on track. It started first turn of the key and sounds great - it just has a generic tune in it for now, but seems to really like it considering tha cam and intake swap. Hopefully, i've have some improvements that need pictures soon.

siroadrnr · 11-10-2014, 12:08 PM

Don't lose your motivation now!! I'll have to go and drag it back to my house then!! Keep it up, you're almost there

mud.man.rj · 11-10-2014, 08:50 PM

Sometimes we need a break but don't quit, it is such a nice build, keep puttering away, we need motivation too.

Possmguts · 01-14-2015, 09:30 PM

Im in for the rest of the ride.

Turtleman · 01-14-2015, 09:47 PM

=======THUD======

Sorry,, let me pick myself up off the floor after reading your dash mods,, Great Job!

66shortwide · 01-15-2015, 11:39 AM

Been workin on it when I have time. Motor cranked right off and runs great, so all good there - just need to get a tune for it as it currently just has the stock tune. Started building the front inner fenders as with the firwall moved and the porter built hinges - I figured it would be easier just to start from scratch. Also, threw all the panels back on just to get a look to make sure it is still looking the same as it does in my head - it does. So, now just need to finish wiring, body work and paint, and some interior work.

Justin@EntropyRad · 01-15-2015, 05:20 PM

50% matte on the clear? Whose radiator are you using? I want to see pics fo the Nova, too!

66shortwide · 01-15-2015, 09:04 PM

it was eastwood clear and i think it was called satin, I'll have to check. I'm running a 69 camaro twin pass radiator, not a bolt on - but a fairly easy fit.
Nova is in several different pieces and places - its next on the list for the pro-touring makeover.

duallyjams · 01-15-2015, 09:12 PM

thanks for the pic so we can visualize

Modges'66 · 01-15-2015, 09:37 PM

Quote:

Originally Posted by 66shortwide

Been workin on it when I have time. Motor cranked right off and runs great, so all good there - just need to get a tune for it as it currently just has the stock tune. Started building the front inner fenders as with the firwall moved and the porter built hinges - I figured it would be easier just to start from scratch. Also, threw all the panels back on just to get a look to make sure it is still looking the same as it does in my head - it does. So, now just need to finish wiring, body work and paint, and some interior work.

So, you should have it done in no-time!....Yeah, right!..Ha-Ha-Ha!
Awesome work, BTW!

**GAc10boy** · 02-05-2015, 01:48 PM

I'm in for this build! Looks like some top notch parts and work.

greg65 · 02-06-2015, 04:06 PM

subscribed

66shortwide · 08-31-2016, 02:09 PM

just thought I'd drop an update to let everyone know I didn't die!!

Time has become non-existent, so progress has been super slow. After building my own front inner fenders, I was never completely happy so I ended up just buying some from slosh tubz. Ordered new replacement doors and they both fit as well as everyone has said - terrible, so lots of work to do there.

drmatera · 08-31-2016, 05:11 PM

wow. sub'd great job.....

mud.man.rj · 08-31-2016, 10:49 PM

Bit at a time is still progress..

08-21-2014, 02:11 PM	#76
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: 66 pro-touring build I would like to know more about the dash instruments - display.

08-21-2014, 04:16 PM	#77
mark 66 Registered User Join Date: Jun 2012 Location: cleawater florida Posts: 246	Re: 66 pro-touring build just found your build thread. looking back over old frame pics it looks like c4 stuff. awesome build. I did a Camaro a couple years back with a c4 front with coil overs. STRONGLY suggest gusseting from inner frame behind upper control arms to cross member. with sticky tire welds will crack at mounts

08-21-2014, 08:39 PM	#78
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build the suede is achieved by just using flat clear coat instead of gloss - my plan was to go shiny, but after spraying the base coat I just really liked that look. The gauges are Dakota Digital VHX series universal - they make a kit for the original style dash, but I wanted something a little more racy looking. They also make a module that will plug into the obd2 port and supply the gauges all the information the the computer gets. thanks for the heads up on the control arm mounting. __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

08-23-2014, 08:53 PM	#79
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build nothing new - finished the boom mat install, mounted the fuse box, mounted the trans dipstick, and working on a few small things. Hopefully tomorrow after church I'll get some time and get the ac vents in and the hoses routed. Just a couple of pics of where it is at today. Attached Images __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

09-15-2014, 01:33 PM	#80
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build So, making slow progress on the wiring - it is so hard to keep things looking nice and clean in the engine compartment. Hopefully, if not out of town to much for work, I can finally hear the motor run in the next week or so!! __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

09-15-2014, 07:26 PM	#81
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 66 pro-touring build AAAAAAAAAAAAAh working for a living sure does get in the way a lot. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-18-2014, 09:46 PM	#82
ChrisDollins Registered User Join Date: Apr 2011 Location: Pocahontas, AR Posts: 554	Re: 66 pro-touring build Very cool build! Somehow missed it earlier. Love PT builds. Chris __________________ 1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182

09-20-2014, 07:10 PM	#83
mr incredible Registered User Join Date: Jun 2013 Location: mchenry ill Posts: 55	Re: 66 pro-touring build i trust your working on it at this moment LOL __________________ USN RETIRED there are two things you don't need in the navy. that's a wife and a pick up truck. cause when your out to sea someone else is using them

09-21-2014, 07:56 AM	#84
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build actually for a change I had most of Sat to work on it. Got all of the motor and trans wiring done, started on the air conditioning wiring, tied up a bunch of little things that needed to be done. Thinking that if all goes well I may be able to try and crank it next week end - that should get me fired back up. All this wiring is tedious and aggravating!! __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

10-24-2014, 08:19 PM	#85
siroadrnr Registered User Join Date: Oct 2014 Location: Staten Island New York Posts: 15	Re: 66 pro-touring build Awesome build thread!! Lots of great ideas for me to "borrow"!! __________________ "Its never too late to have a happy childhood." 70 Roadrunner,.. 79 Blazer, ..85 Harley bobber,.. 97 GMC Suburban Diesel,.. 99 Sierra, ..06 Ducati Monster Dark, ..07 Silverado ,.. 11 Audi A4

11-10-2014, 10:56 AM	#86
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build So, no new pictures as all I have been doing is a bunch of little things. This project has drug out for so long I was starting to lose motivation, so I decided to get the engine running to get me back on track. It started first turn of the key and sounds great - it just has a generic tune in it for now, but seems to really like it considering tha cam and intake swap. Hopefully, i've have some improvements that need pictures soon. __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

11-10-2014, 12:08 PM	#87
siroadrnr Registered User Join Date: Oct 2014 Location: Staten Island New York Posts: 15	Re: 66 pro-touring build Don't lose your motivation now!! I'll have to go and drag it back to my house then!! Keep it up, you're almost there __________________ "Its never too late to have a happy childhood." 70 Roadrunner,.. 79 Blazer, ..85 Harley bobber,.. 97 GMC Suburban Diesel,.. 99 Sierra, ..06 Ducati Monster Dark, ..07 Silverado ,.. 11 Audi A4

11-10-2014, 08:50 PM	#88
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 66 pro-touring build Sometimes we need a break but don't quit, it is such a nice build, keep puttering away, we need motivation too.

01-14-2015, 09:30 PM	#89
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: 66 pro-touring build Im in for the rest of the ride. __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

01-14-2015, 09:47 PM	#90
Turtleman Registered User Join Date: Sep 2013 Location: Glendale, AZ Posts: 289	Re: 66 pro-touring build =======THUD====== Sorry,, let me pick myself up off the floor after reading your dash mods,, Great Job!



Register or Log In To remove these advertisements.

01-15-2015, 11:39 AM	#91
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build Been workin on it when I have time. Motor cranked right off and runs great, so all good there - just need to get a tune for it as it currently just has the stock tune. Started building the front inner fenders as with the firwall moved and the porter built hinges - I figured it would be easier just to start from scratch. Also, threw all the panels back on just to get a look to make sure it is still looking the same as it does in my head - it does. So, now just need to finish wiring, body work and paint, and some interior work. Attached Images __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

01-15-2015, 05:20 PM	#92
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: 66 pro-touring build 50% matte on the clear? Whose radiator are you using? I want to see pics fo the Nova, too! __________________ * Call me NOT the website number* Justin Novick (773) 303-8251 Sales/Support Entropy Radiator / Engineered Cooling Products "The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com

01-15-2015, 09:04 PM	#93
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build it was eastwood clear and i think it was called satin, I'll have to check. I'm running a 69 camaro twin pass radiator, not a bolt on - but a fairly easy fit. Nova is in several different pieces and places - its next on the list for the pro-touring makeover. __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

01-15-2015, 09:12 PM	#94
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 66 pro-touring build thanks for the pic so we can visualize __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-05-2015, 01:48 PM	#96
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: 66 pro-touring build I'm in for this build! Looks like some top notch parts and work. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

02-06-2015, 04:06 PM	#97
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: 66 pro-touring build subscribed __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

08-31-2016, 02:09 PM	#98
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: 66 pro-touring build just thought I'd drop an update to let everyone know I didn't die!! Time has become non-existent, so progress has been super slow. After building my own front inner fenders, I was never completely happy so I ended up just buying some from slosh tubz. Ordered new replacement doors and they both fit as well as everyone has said - terrible, so lots of work to do there. Attached Images __________________ Trent 12 Cadillac CTS-V 07 Sierra HD 4x4 Duramax 66 C10 Short Wide 63 Chevy II(nova)

08-31-2016, 05:11 PM	#99
drmatera Registered User Join Date: Aug 2016 Location: Nicholson, Ga Posts: 134	Re: 66 pro-touring build wow. sub'd great job..... __________________ 1981 K10 (4.8 / 4L60E swap) 1982 C10 (5.3 / 4L80E swap) 1985 C20 Suburban (454 / 4L80E)

08-31-2016, 10:49 PM	#100
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 66 pro-touring build Bit at a time is still progress.. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

Register or Log In To remove these advertisements.