Has anyone made their own Rad Support for an AD? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mains52 · 07-17-2018, 08:55 AM

I cut mine down to do the s10 swap scrapped what I cut out and then switched back to a stock frame. As I am getting closer to putting on my front sheet metal I was wondering if anyone had the dimensions or has made their own.
Thanks

b-mac · 07-17-2018, 07:55 PM

Are you going back to a stock radiator? I could help you with the between-the-fenders part, but I cut the bottom off mine.

rustycars63 · 07-17-2018, 10:12 PM

Will be reworking my radiator support, going to make one out of three , my have some parts left over also.

GreasyLikeaBurger · 07-17-2018, 11:00 PM

I have my old one from my '52 off the truck sitting on the shelf. If you need measurements, let me know.

MiraclePieCo · 07-18-2018, 04:49 AM

Retailers sell a "street rod version" radiator support. It looks different than the original and mounts the radiator lower than stock. Should be easy to copy.

https://www.classicparts.com/1947-53...ctinfo/78-510/

Mains52 · 07-18-2018, 07:40 AM

Quote:

Originally Posted by b-mac

Are you going back to a stock radiator? I could help you with the between-the-fenders part, but I cut the bottom off mine.

The plan is to use an after market radiator of ebay. I guess my main concern was with it being cut and not meeting up with the crossmember that I would have a bunch of work trying to keep my fenders in the right place. Maybe I am thinking to far into it.

mr48chev · 07-18-2018, 12:24 PM

I've got one laying out back actually several but some are GMC and big truck that I can get a pattern off.

If you are looking at a core support someone has the 3000 series trucks are 12 inches between the top and bottom bolt holes were the inner fenders bolt to the sides while the big truck cores are 13-3/4 + - a tad between those bolt holes.

Mains52 · 07-19-2018, 07:35 AM

Quote:

Originally Posted by mr48chev

I've got one laying out back actually several but some are GMC and big truck that I can get a pattern off.

If you are looking at a core support someone has the 3000 series trucks are 12 inches between the top and bottom bolt holes were the inner fenders bolt to the sides while the big truck cores are 13-3/4 + - a tad between those bolt holes.

Thank you for that I guess I will just bolt it up and measure from there.

mr48chev · 07-19-2018, 01:31 PM

I got it dug out.

23 inches down the inside before the bend to the middle. I have one that has a gentle curved stamped piece at the bottom and one that is more of a 45 degree angle/

27-1/8 from the top to the bottom of the channel and then you add the pieces for the core support to bolt to the crossmember that stick down about 1/2 inch.

22-7/8 wide outside to outside.

b-mac · 07-19-2018, 08:53 PM

Since the tolerances on these trucks are so loose, once you mount the inner and outer fenders and then grill, I would think you could mostly engineer the rest.

I would put a 2x4 on top of a jack, put the hood on, and lift the front enough so everything roughly lines up.

07-17-2018, 08:55 AM	#1
Mains52 Registered User Join Date: Jun 2016 Location: Knoxville, Illinois Posts: 331	Has anyone made their own Rad Support for an AD? I cut mine down to do the s10 swap scrapped what I cut out and then switched back to a stock frame. As I am getting closer to putting on my front sheet metal I was wondering if anyone had the dimensions or has made their own. Thanks

07-17-2018, 07:55 PM	#2
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: Has anyone made their own Rad Support for an AD? Are you going back to a stock radiator? I could help you with the between-the-fenders part, but I cut the bottom off mine.

07-17-2018, 10:12 PM	#3
rustycars63 Registered User Join Date: Aug 2015 Location: Ruidoso New Mexico Posts: 52	Re: Has anyone made their own Rad Support for an AD? Will be reworking my radiator support, going to make one out of three , my have some parts left over also.

07-17-2018, 11:00 PM	#4
GreasyLikeaBurger Registered User Join Date: Oct 2015 Location: Costa Mesa, CA Posts: 190	Re: Has anyone made their own Rad Support for an AD? I have my old one from my '52 off the truck sitting on the shelf. If you need measurements, let me know.

07-18-2018, 04:49 AM	#5
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: Has anyone made their own Rad Support for an AD? Retailers sell a "street rod version" radiator support. It looks different than the original and mounts the radiator lower than stock. Should be easy to copy. https://www.classicparts.com/1947-53...ctinfo/78-510/ Attached Images __________________ 1951 Chevy Panel Truck

07-18-2018, 12:24 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,266	Re: Has anyone made their own Rad Support for an AD? I've got one laying out back actually several but some are GMC and big truck that I can get a pattern off. If you are looking at a core support someone has the 3000 series trucks are 12 inches between the top and bottom bolt holes were the inner fenders bolt to the sides while the big truck cores are 13-3/4 + - a tad between those bolt holes. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-19-2018, 01:31 PM	#9
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,266	Re: Has anyone made their own Rad Support for an AD? I got it dug out. 23 inches down the inside before the bend to the middle. I have one that has a gentle curved stamped piece at the bottom and one that is more of a 45 degree angle/ 27-1/8 from the top to the bottom of the channel and then you add the pieces for the core support to bolt to the crossmember that stick down about 1/2 inch. 22-7/8 wide outside to outside. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-19-2018, 08:53 PM	#10
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: Has anyone made their own Rad Support for an AD? Since the tolerances on these trucks are so loose, once you mount the inner and outer fenders and then grill, I would think you could mostly engineer the rest. I would put a 2x4 on top of a jack, put the hood on, and lift the front enough so everything roughly lines up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.