CO Parting out 1974 C20 Camper Special - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SoCoC10** · 05-12-2022, 07:48 AM

Parting out 1974 C20 Camper Special
Very well optioned truck. No title
Everything for sale located in Colorado Springs, CO.

Bead with tailgate $225
Doors $60ea
Cab with windshield $250
Rear differential 3.73 gears w/9 rear leaf springs $225
Rear sliding window $50
Right fender $40

Following parts are already sold.
Bucket seats w/mounting brackets $OLD
Center console $OLD
Bumper guards $OLD
Engine $OLD
Transmission $OLD
Left fender $OLD
Hood $OLD
Drivers door panel $OLD
Hub caps $OLD
Headlight bezels $OLD
Door sill plates $OLD
Headlight switch $OLD
Passenger side gas tank $OLD

Let me know what part(s) you want? If you want to buy a part, I will pull by the end of the week and ship the next Monday.

jchav62 · 05-12-2022, 09:15 AM

Hey SoCo! I need the door sill plates and the headlight knob. Shipped to 87701, LV, NM

Thanks! JC62

jchav62 · 05-12-2022, 09:24 PM

Quote:

Originally Posted by SoCoC10

Let me see what condition they are in and I’ll get back to you.

Sounds great. Thanks!

**SoCoC10** · 05-13-2022, 12:54 PM

Quote:

Originally Posted by jchav62

Sounds great. Thanks!

Drivers sill plate is missing very front of it. $30 for both sill plates and the headlight switch shipped.

**SoCoC10** · 05-13-2022, 12:57 PM

Updated pictures of the truck. Hood snd left fender are gone. Still lots of good parts!

**69cam** · 05-13-2022, 01:36 PM

Interested in engine stands.

bagged01extcab · 05-13-2022, 03:43 PM

Pics and Condition of headlight doors? Any broken screw holes?

**SoCoC10** · 05-13-2022, 04:56 PM

Quote:

Originally Posted by 69cam

Interested in engine stands.

I think they are there. Let me make sure and I’ll get back to you.

**69cam** · 05-13-2022, 06:27 PM

Please do. Pics if not too much trouble. No rush. Thanks.

bagged01extcab · 05-14-2022, 07:49 PM

Quote:

Originally Posted by SoCoC10

The trim around the headlights?

Yes, that’s the parts I’m asking about. What are the condition of the bolt holes? When over tightened, they are bad about the screw pulling through the hole and enlarging the screw hole. Any pitting?

Thanks

**CS1972** · 05-15-2022, 08:06 AM

If the Camper Special has a steering stabilizer bracket & Ubolts, I'll take it.

See pic.

**SoCoC10** · 05-15-2022, 09:43 PM

Quote:

Originally Posted by 69cam

Interested in engine stands.

$80 shipped. If you are ok with that my is PayPal troymatos@yahoo. com
Please provide me a ship to address

**SoCoC10** · 05-15-2022, 09:47 PM

Quote:

Originally Posted by bagged01extcab

Pics and Condition of headlight doors? Any broken screw holes?

No oversized holes. $65 for the pair shipped. If you are ok with that my PayPal info troymatos@yahoo.com. Please provide me a ship to address

**SoCoC10** · 05-15-2022, 09:51 PM

Quote:

Originally Posted by CS1972

If the Camper Special has a steering stabilizer bracket & Ubolts, I'll take it.

See pic.

Sorry I don’t have that part.

jchav62 · 05-16-2022, 09:52 AM

Quote:

Originally Posted by SoCoC10

Drivers sill plate is missing very front of it. $30 for both sill plates and the headlight switch shipped.

PM sent

**HOTFUN** · 05-16-2022, 04:34 PM

The rear B pillar trim lower pieces left and right if not broken out where screws attached?
Does the rear cab wall carpet piece have any mounting hardware to hold it up on the back panel or was it glued to the back wall? Interested if there is any attaching screws washers and how many places it attaches to? The one seat belt floor bolt on passenger side inner? I believe it also held the back inner seat bracket to floor under this belt? Is the rear window factory and is it good or would you sell a glass seal end moulding off it? And the sponge rubber rear fender to cab seals screwed on the cowl sides. I would be interested in both sides? Mark

TALLone71 · 05-16-2022, 07:06 PM

hi, I'm interested in a price for the camper special badges on both sides of the cab, shipped to 23838, and if they are pitted. thank you!

**69cam** · 05-16-2022, 07:38 PM

Payment sent along with shipping info. If you can include mounting hardware that would be great. Not in a big hurry. Thanks.

bagged01extcab · 05-16-2022, 11:04 PM

Quote:

Originally Posted by SoCoC10

No oversized holes. $65 for the pair shipped. If you are ok with that my PayPal info troymatos@yahoo.com. Please provide me a ship to address

$ sent. I’ll pm u address

**SoCoC10** · 05-17-2022, 10:32 AM

Quote:

Originally Posted by jchav62

PM sent

I’ll get them pulled this weekend and send you tracking by early next week.
Thank you

**SoCoC10** · 05-17-2022, 10:33 AM

Quote:

Originally Posted by 69cam

Payment sent along with shipping info. If you can include mounting hardware that would be great. Not in a big hurry. Thanks.

Got it. I’ll get the mounts pulled this weekend and shipped by early next week.
Thanks

**SoCoC10** · 05-17-2022, 10:38 AM

Quote:

Originally Posted by TALLone71

hi, I'm interested in a price for the camper special badges on both sides of the cab, shipped to 23838, and if they are pitted. thank you!

$35 for both shipped

TALLone71 · 05-17-2022, 05:45 PM

hi, thanks for the extra picture!..was curious how much more for the cab corner trim pieces directly above the camper special emblems, with the teepees on them, total shipped with the camper special badges. thank you!

**SoCoC10** · 05-18-2022, 06:30 PM

Quote:

Originally Posted by HOTFUN

The rear B pillar trim lower pieces left and right if not broken out where screws attached?
Does the rear cab wall carpet piece have any mounting hardware to hold it up on the back panel or was it glued to the back wall? Interested if there is any attaching screws washers and how many places it attaches to? The one seat belt floor bolt on passenger side inner? I believe it also held the back inner seat bracket to floor under this belt? Is the rear window factory and is it good or would you sell a glass seal end moulding off it? And the sponge rubber rear fender to cab seals screwed on the cowl sides. I would be interested in both sides? Mark

Here are the B pillar trim pieces. The screw holes are in tact.
This is all 9 of the carpet hold down clips and screws on the rear cab wall.
The bolt for the seat and seat belt. It appears to be the same as the other 3.
Make me an offer for all the above.

Don’t want to ship the rear window at this time.
Offer on the driver cowl/ fender seal? I’ll pull the seal on the passenger side depending on your offer.

**SoCoC10** · 05-18-2022, 06:38 PM

More pictures

05-12-2022, 07:48 AM	#1
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Parting out 1974 C20 Camper Special Parting out 1974 C20 Camper Special Very well optioned truck. No title Everything for sale located in Colorado Springs, CO. Bead with tailgate $225 Doors $60ea Cab with windshield $250 Rear differential 3.73 gears w/9 rear leaf springs $225 Rear sliding window $50 Right fender $40 Following parts are already sold. Bucket seats w/mounting brackets $OLD Center console $OLD Bumper guards $OLD Engine $OLD Transmission $OLD Left fender $OLD Hood $OLD Drivers door panel $OLD Hub caps $OLD Headlight bezels $OLD Door sill plates $OLD Headlight switch $OLD Passenger side gas tank $OLD Let me know what part(s) you want? If you want to buy a part, I will pull by the end of the week and ship the next Monday. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 05-18-2022 at 06:21 PM.

05-12-2022, 09:15 AM	#2
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Parting out 1974 C20 Camper Special Hey SoCo! I need the door sill plates and the headlight knob. Shipped to 87701, LV, NM Thanks! JC62 __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-13-2022, 12:57 PM	#5
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: Parting out 1974 C20 Camper Special Updated pictures of the truck. Hood snd left fender are gone. Still lots of good parts! Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

05-13-2022, 01:36 PM	#6
69cam Senior Member Join Date: Jan 2017 Location: Olney Il. Posts: 221	Re: Parting out 1974 C20 Camper Special Interested in engine stands.

05-13-2022, 03:43 PM	#7
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 273	Re: Parting out 1974 C20 Camper Special Pics and Condition of headlight doors? Any broken screw holes? __________________ Trey Oney

05-13-2022, 06:27 PM	#9
69cam Senior Member Join Date: Jan 2017 Location: Olney Il. Posts: 221	Re: Parting out 1974 C20 Camper Special Please do. Pics if not too much trouble. No rush. Thanks.

05-15-2022, 08:06 AM	#11
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: Parting out 1974 C20 Camper Special If the Camper Special has a steering stabilizer bracket & Ubolts, I'll take it. See pic. Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

05-16-2022, 04:34 PM	#16
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,135	Re: Parting out 1974 C20 Camper Special The rear B pillar trim lower pieces left and right if not broken out where screws attached? Does the rear cab wall carpet piece have any mounting hardware to hold it up on the back panel or was it glued to the back wall? Interested if there is any attaching screws washers and how many places it attaches to? The one seat belt floor bolt on passenger side inner? I believe it also held the back inner seat bracket to floor under this belt? Is the rear window factory and is it good or would you sell a glass seal end moulding off it? And the sponge rubber rear fender to cab seals screwed on the cowl sides. I would be interested in both sides? Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

05-16-2022, 07:06 PM	#17
TALLone71 Registered User Join Date: Nov 2017 Location: Richmond va Posts: 179	Re: Parting out 1974 C20 Camper Special hi, I'm interested in a price for the camper special badges on both sides of the cab, shipped to 23838, and if they are pitted. thank you! __________________ :chevy

05-16-2022, 07:38 PM	#18
69cam Senior Member Join Date: Jan 2017 Location: Olney Il. Posts: 221	Re: Parting out 1974 C20 Camper Special Payment sent along with shipping info. If you can include mounting hardware that would be great. Not in a big hurry. Thanks.

05-17-2022, 05:45 PM	#23
TALLone71 Registered User Join Date: Nov 2017 Location: Richmond va Posts: 179	Re: Parting out 1974 C20 Camper Special hi, thanks for the extra picture!..was curious how much more for the cab corner trim pieces directly above the camper special emblems, with the teepees on them, total shipped with the camper special badges. thank you! __________________ :chevy

05-18-2022, 06:38 PM	#25
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: Parting out 1974 C20 Camper Special More pictures Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.